| Age | Commit message (Collapse) | Author |
|---|
|
Rename bond confs and man as well.
[tomegun: dropped a stray comma]
|
|
The atmel driver sets a default resolution of 20 for each touchpads it
creates. On this model, 10 is more appropriate.
The resolution is not set for the touchscreen by the kernel, so match
the name to both touchpad and touchscreen.
|
|
The Lenovo X230 advertize a vertical resolution of 136, which gives a true
size of 31 mm. The actual physical size of the touchpad is 40 mm, so
override the resolution to 100.
|
|
The pointingstick of the Dell Latitude E6400 is somewhat slow by default,
whereas the pointingstick of the Dell Latitude D620 is much too fast by
default, set POINTINGSTICK_CONST_ACCEL for both of them to adjust for this.
|
|
Lenovo has changed the sensitivity of the trackpoint on the x240 / T440s / T540
generation of Thinkpads, making them somewhat insensitive by default, add a
hwdb entry to tweak the sensitivity setting.
The ThinkPad X200s is way way too slow by default and unless you push the
trackpoint quite hard only sends delta events in the 1-2 range, tweak the
sensitivity to make it send a wider range of deltas and apply a const accel
factor to make it have a more reasonable speed by default.
|
|
IBM / Lenovo trackpoints allow specifying a sensitivity setting through a
ps/2 command, which changes the range of the deltas sent when using the
trackpoint.
On some models with normal usage only deltas of 1 or 2 are send, resulting in
there only being 2 mouse cursor movement speeds, rather than the expected fluid
scale. Changing the sensitivity to a higher level than the bootup default fixes
this.
This commit adds support for setting a POINTINGSTICK_SENSITIVITY value
in hwdb to allow changing the sensitivity on boot through udev / hwdb.
|
|
There is quite a wide spread in the delta events generated by pointingsticks,
some generate deltas of 1-2 under normal use, while others generate deltas
from 1-20.
This commit adds a hwdb file which allows specifying a per model
POINTINGSTICK_CONST_ACCEL value which can be used by the userspace input stack
to normalize the deltas so that all pointingsticks get the same feeling ootb.
The hwdb matching re-uses the existing 60-evdev.rules.
|
|
Fedora's filesystem package ships /usr/bin (and other directories) which are
not writable by its owner. machinectl pull-dkr (and possibly others) are not
able to extract those:
14182 mkdirat(3, "usr", 0700) = 0
14182 mkdirat(3, "usr/bin", 0500) = 0
14182 openat(3, "usr/bin/[", O_WRONLY|O_CREAT|O_EXCL|O_NOCTTY|O_NONBLOCK|O_CLOEXEC, 0700) = -1 EACCES (Permission denied)
...
|
|
If there's no remaining process to kill, skip the SIGKILL states if
SIGKILL is disabled.
Effectively this doesn't change much since if there's nothing to kill
with SIGTERM or SIGABRT then there's also nothing to kill with SIGKILL.
However, this avoids confusion with the state engine jumping through
SIGKILL states for no reason...
|
|
|
|
|
|
|
|
|
|
We should always name the object first, the level second, like
everywhere else in the sources.
|
|
|
|
Also, when we do permissions checks using creds, verify that we don't do
so based on augmented creds, as extra safety check.
|
|
is free
|
|
Let's better be safe than sorry.
|
|
known names
|
|
|
|
|
|
|
|
This patch adds configurational support for bond option.
Test conf:
bond.netdev
---
[NetDev]
Name=bond1
Kind=bond
[Bond]
ArpAllTargets=all
PrimaryReselect=better
ArpIntervalSec=10s
ArpIpTargets= 192.168.8.102 192.168.8.101 192.168.8.102
---
$cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: load balancing (round-robin)
MII Status: up
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
ARP Polling Interval (ms): 10000
ARP IP target/s (n.n.n.n form): 192.168.8.100, 192.168.8.101, 192.168.8.102
|
|
Add UDPCheckSum option to enable transmitting UDP checksums when doing
VXLAN/IPv4. Add UDP6ZeroChecksumRx, and UDP6ZeroChecksumTx
options to enable sending zero checksums and receiving zero
checksums in VXLAN/IPv6
[tomegun: rebase manpage due to whitespace changes]
|
|
udevadm manual says:
A value of 0 will check if the queue is empty and always return
immediately.
However, currently we ignore the deadline if the value is 0, and wait
without any limit.
Zero timeout behaved according to the documentation until commit
ead7c62ab7 (udevadm: settle - kill alarm()). Looking at this patch, it
seems that the behavior change was unintended.
This patch restores the documented behavior.
|
|
|
|
|
|
These are useful for plain devices as they don't have any metadata by
themselves. Instead of using an unreliable hardcoded device name in crypttab
you can then put static metadata at the start of the partition for a stable
UUID or label.
https://bugs.freedesktop.org/show_bug.cgi?id=87717
https://bugs.debian.org/751707
https://launchpad.net/bugs/953875
|
|
Boolean arithmetic is great, use it!
if (a && !b)
return 1;
if (!a && b)
return -1,
is equivalent to
if (a != b)
return a - b;
Furthermore:
r = false;
if (condition)
r = true;
is equivalent to:
r = condition;
|
|
sd_device_new_from_* now returns -ENODEV when the device does not exist, and the enumerator
silently drops these errors as missing devices is exepected.
|
|
It is still possible to include uninitialized ones, but now that is opt-in. In most
cases people only want initialized devices. Exception is if you want to work without
udev running.
Suggested by David Herrmann.
|
|
This is rarely, if ever, used. Drop it from the new public API and only keep it for
the legacy API.
Suggested by David Herrmann.
|
|
|
|
|
|
This should not be used for any new code, as we don't set errno in new code,
but there are several legacy users, so let's keep it in shared.
|
|
|
|
The key was parsed properly, but the warning was still generated.
|
|
Fix for 4beac74e69.
Thanks, Ronny!
|
|
When selinux calls our callback with a log message, it specifies the
type as AVC or INFO/WARNING/ERROR. The question is how to map this to
audit types and/or log priorities. SELINUX_AVC maps to AUDIT_USER_AVC
reasonably, but for the other messages we have no idea, hence we use
AUDIT_USER_AVC for everything. When not using audit logging, we can
map those selinux levels to LOG_INFO/WARNING/ERROR etc.
Also update comment which was not valid anymore in light of journald
sucking in audit logs, and was actually wrong from the beginning —
libselinux uses the callback for everything, not just avcs.
This stemmed out of https://bugzilla.redhat.com/show_bug.cgi?id=1195330,
but does not solve it.
|
|
We actually only use the journal when showing status. Move setrlimit call
so it is only called for status.
https://bugzilla.redhat.com/show_bug.cgi?id=1184712
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=89885
|
|
The Trust TB7300 (relabelled Waltop?) tablet has a scrollwheel which shows
up as a /dev/input/event# node all by itself. Currently input_id does not
set any ID_INPUT_FOO attr on this causing it it to not be recognized by
Xorg / libinput.
This commit fixes this by marking it with ID_INPUT_KEY.
Reported-by: Sjoerd Timmer <themba@randomdata.nl>
|
|
Make test_pointer / test_keys return a boolean indicating whether or not
they've set any properties on the device.
|
