summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-26journalctl: use _COMM= match for scriptsZbigniew Jędrzejewski-Szmek
In case of scripts, _EXE is set to the interpreter name, and _COMM is set based on the file name. Add a match for _COMM, and _EXE if the interpreter is not a link (e.g. for yum, the interpreter is /usr/bin/python, but it is a link to /usr/bin/python2, which in turn is a link to /usr/bin/python2.7, at least on Fedora, so we end up with _EXE=/usr/bin/python2.7). I don't think that such link chasing makes sense, because the final _EXE name is more likely to change.
2013-07-26logind: update state file after generating the session fifo, not beforeLennart Poettering
https://bugs.freedesktop.org/show_bug.cgi?id=67273
2013-07-26systemd-python: fix gcc warningZbigniew Jędrzejewski-Szmek
src/python-systemd/_reader.c: In function Reader_get_catalog: src/python-systemd/_reader.c:912:53: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] assert(mid_len > l); ^
2013-07-26build-sys: use pkg-config for python compilation flagsZbigniew Jędrzejewski-Szmek
Python 2.7, and 3.2 and higher support querying compilation flags through pkg-config. This makes python support follow rules similar to various other optional compilation-time libraries. New flags are called PYTHON_DEVEL_CFLAGS and PYTHON_DEVEL_LIBS, because PYTHON (without _DEVEL), is already used for the python binary name, and things would be confusing if the same prefix was used for two things. configure has --disable-python-devel to disable python modules. One advantage is that CFLAGS for modules gets smaller: - -I/usr/include/python3.3m -I/usr/include/python3.3m -Wno-unused-result -DDYNAMIC_ANNOTATIONS_ENABLED=1 -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_GNU_SOURCE -fPIC -fwrapv + -I/usr/include/python3.3m as does LIBS: - -lpthread -ldl -lutil -lm -lpython3.3m + -lpython3.3m Support for Python 2.6 is removed, but can be easily restored by using PYTHON_DEVEL_CFLAGS="$(python2.6-config --cflags)", etc., as ./configure parameters. https://bugs.freedesktop.org/show_bug.cgi?id=57800
2013-07-26systemd-python: use modern CZbigniew Jędrzejewski-Szmek
2013-07-26systemctl: rearrange --help output a bitLennart Poettering
2013-07-26systemctl: remove "load" commandLennart Poettering
"systemctl load" has always been racy since the GC could hit any time, before making use of the loaded unit. Very recent systemd will run GC immeidately after all unit state changes which has the effect that the the effect of "systemctl load" is completely gone now, so let's remove the support for it in "systemctl" for good.
2013-07-26systemctl: move set-log-level to systemd-analyzeLennart Poettering
"systemctl set-log-level" is a command for analysis and tracing hence "systemd-analyze" should be the better home for it, thus allowing us to make the overly large "systemctl" a bit smaller.
2013-07-26systemctl: move "dump" command from systemctl to systemd-analyzeLennart Poettering
It's an analysis command and its format is explicitly not covered by any stability guarantees, hence move away from systemctl and into systemd-analyze, minimizing the already large interface of systemctl a bit. This patch also adds auto-paging to the various systemd-analyze commands where that makes sense
2013-07-26core: allow setting RemainAfterExit= for transient servicesLennart Poettering
2013-07-26shared: split mkdir_*() and mkdir_*_label() from each otherKay Sievers
Avoid pulling-in selinux for tools which just create directories but not need to fix the selinux label.
2013-07-26shell-completion: add kernel-installKay Sievers
2013-07-24tmpfiles-setup: exclude /dev prefixes filesDave Reisner
Fixes Arch Linux bug: https://bugs.archlinux.org/task/36259
2013-07-24tmpfiles: introduce --exclude-prefixDave Reisner
The opposite of --prefix, allows specifying path prefixes which should be skipped when processing rules.
2013-07-24tmpfiles: support passing --prefix multiple timesDave Reisner
2013-07-24udev: static_node - don't touch permissions uneccessarilyTom Gundersen
Don't set default permissions if only TAGS were specified in a rule.
2013-07-24udev: log error if chmod/chown of static dev nodes failsTom Gundersen
2013-07-24shell-completion: Add machinectl zsh completionWilliam Giokas
2013-07-24initctl: use irreversible jobs when switching runlevelsZbigniew Jędrzejewski-Szmek
Spotted by uau in #systemd.
2013-07-24README: Bump to Linux 3.0Jesper Larsen
Support for writing to cgroup.procs was introduced in 3.0
2013-07-24journal: immediately sync to disk as soon as we receieve an EMERG/ALERT/CRIT ↵Lennart Poettering
message
2013-07-24core: synchronously block when loggingLennart Poettering
Previously, the logging sockets were asynchronous and if clogged we'd lose messages. We did this to be extra careful given that PID 1 might need to spawn the logging daemon as response to PID 1's own log messages and we really should avoid a deadlock in that case. As it turns out this causes loss of too many messages, hence make the socket blocking again, however put a time limit on it to avoid unbounded deadlocks in the unlikely case they happen. https://bugs.freedesktop.org/show_bug.cgi?id=66664
2013-07-23remove systemd-timestamp from sourcesDave Reisner
No sense in keeping this around if support for reading RD_TIMESTAMP has been removed.
2013-07-23remove left-over initrd time stamp handlingKay Sievers
2013-07-23man: Fix copy&paste errorMichael Biebl
2013-07-23README Bump minimum required version of kmodMichael Biebl
See edeb68c53f1cdc452016b4c8512586a70b1262e3.
2013-07-23build-sys: prepare 206systemd/v206Lennart Poettering
2013-07-23NEWS: fix mistakeMaciej Wereski
2013-07-22bus: update for kdbus changesKay Sievers
2013-07-22TODO: updateKay Sievers
2013-07-22kmod-static-nodes: remain after exitTom Gundersen
2013-07-22systemd-tmpfiles-setup-dev: remain after exitTom Gundersen
Without this, tmpfiles-setpu-dev would be re-run if any other service, which pulls in basic.target, was started after setup-dev was finished and before basic.target was active.
2013-07-22NEWS: prepare half a NEWS file for upcoming 206Lennart Poettering
2013-07-21man: wording and grammar updatesJan Engelhardt
This includes regularly-submitted corrections to comma setting and orthographical mishaps that appeared in man/ in recent commits.
2013-07-21rules: net, tty description - ask hwdb explicitly for pci dataKay Sievers
2013-07-20shared: fix build on !x86Shawn Landden
2013-07-21man: udev - add section about hwdbKay Sievers
2013-07-20core: correct dbus parameter directionZbigniew Jędrzejewski-Szmek
2013-07-20rules: drivers - always call kmod, even when a driver is bound to the deviceKay Sievers
On Sat, Jul 20, 2013 at 12:56 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote: > After a recent change present in 3.11-rc1 there is a driver, called processor, > that can be bound to the CPU devices whose sysfs directories are located under > /sys/devices/system/cpu/. A side effect of this is that, after the driver has > been bound to those devices, the kernel adds DRIVER=processor to ENV for CPU > uevents and they don't match the default rule for autoloading modules matching > MODALIAS: > > DRIVER!="?*", ENV{MODALIAS}=="?*", IMPORT{builtin}="kmod load $env{MODALIAS}" > > any more. However, there are some modules whose module aliases match specific > CPU features through the modalias string and those modules should be loaded > automatically if a compatible CPU is present. Yet, with the processor driver > bound to the CPU devices the above rule is not sufficient for that, so we need > a new default udev rule allowing those modules to be autoloaded even if the > CPU devices have drivers.
2013-07-19make: Automake is complaining about .PRECIOUS being redefinedHolger Hans Peter Freyther
Yesterday I added test-suite.log as dependency to the .PRECIOUS target. Automake is warning about this target being redefined and from what I see there is no way I can stop the warning but I can add the %MAKEFILE% as dependency. automake warning: Makefile.am:35: warning: user target '.PRECIOUS' defined here ... /usr/share/automake-1.13/am/configure.am: ... overrides Automake target '.PRECIOUS' defined here [zj: s/%MAKEFILE%/Makefile/ because %MAKEFILE% wasn't actually substituted properly.]
2013-07-19man: also mention /run/log/journal in systemd-jouranld.service(8)Zbigniew Jędrzejewski-Szmek
2013-07-19journald: after the cgroup rework processes may be in both user and system ↵Lennart Poettering
units at the same time
2013-07-19man: update documentation of systemctl cgroup commandsLennart Poettering
2013-07-19man: update documentation of slice units a bitLennart Poettering
2013-07-19man: update scope unit man page a bitLennart Poettering
2013-07-19man: update pam_systemd documentation to current state of the codeLennart Poettering
2013-07-19core: update configuration directive list "systemd ↵Lennart Poettering
--dump-configuration-items" shows
2013-07-19man: list scope and slice units in systemd(1)Lennart Poettering
2013-07-19man: document sd_pid_get_slice() call of libsystemd-loginLennart Poettering
2013-07-19man: a few corrections to the machinectl man pageLennart Poettering