| Age | Commit message (Collapse) | Author |
|---|
|
This renames __useless_struct_to_allow_trailing_semicolon__ everywhere
to _sd_useless_struct_to_allow_trailing_semicolon_, to follow our usual
rule of prefixing stuff from public headers that should be considered
internal with "_sd_".
While we are at it, also to be safe: when the struct is used in the C++
protector macros make sure to use two different names depending on
whether it appears in the C++ or C side of things. After all, there
might be compilers that don't consider C++ and C structs the same.
See https://github.com/systemd/systemd/pull/2052#discussion_r46067059
|
|
Let's distuingish the cases where our code takes an active role in
selinux management, or just passively reports whatever selinux
properties are set.
mac_selinux_have() now checks whether selinux is around for the passive
stuff, and mac_selinux_use() for the active stuff. The latter checks the
former, plus also checks UID == 0, under the assumption that only when
we run priviliged selinux management really makes sense.
Fixes: #1941
|
|
Make gcc cleanup helper calls public in most of our sd-xyz APIs
|
|
resolved: add edns0 support
|
|
|
|
The header file defines some helpers for GLIBC NSS and doesn't include
anything else but glibc headers, hence there's little reason to keep it
in shared/.
See: #2008
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
tests: don't run test on incomplete setup; use sync
|
|
flush doesn't sync a journal -> tests sometimes fail
|
|
core:execute: fix fork() fail handling in exec_spawn()
|
|
This is a follow-up commit for
https://github.com/systemd/systemd/pull/1937
See https://github.com/systemd/systemd/pull/2030
|
|
If pid < 0 after fork(), 0 is always returned because r =
exec_context_load_environment() has exited successfully.
This will make the caller of exec_spawn() not able to handle
the fork() error case and make systemd abort assert() possibly.
|
|
drop warning if setting preset worked anyways
|
|
Fix stdout stream parsing
|
|
core: Do not bind a mount unit to a device, if it was from mountinfo
|
|
core: allow 'SetUnitProperties()' to run on inactive units too
|
|
Return of the file triggers
|
|
core: rename Random* to RandomizedDelay*
|
|
Fix rlimit parsing
|
|
|
|
* refuse limits if soft > hard
* print an actual value instead of (null)
see https://github.com/systemd/systemd/pull/1994#issuecomment-159999123
|
|
tests: don't run tests on incomplete setup
|
|
resolved: fix typo in in_addr_is_localhost()
|
|
Network fixes
|
|
|
|
|
|
This is often needed for proper DNSSEC support, and even to handle AAAA records
without falling back to TCP.
If the path between the client and server is fully compliant, this should always
work, however, that is not the case, and overlarge packets will get mysteriously
lost in some cases.
For that reason, we use a similar fallback mechanism as we do for palin EDNS0,
EDNS0+DO, etc.:
The large UDP size feature is different from the other supported feature, as we
cannot simply verify that it works based on receiving a reply (as the server
will usually send us much smaller packets than what we claim to support, so
simply receiving a reply does not mean much).
For that reason, we keep track of the largest UDP packet we ever received, as this
is the smallest known good size (defaulting to the standard 512 bytes). If
announcing the default large size of 4096 fails (in the same way as the other
features), we fall back to the known good size. The same logic of retrying after a
grace-period applies.
|
|
This indicates that we can handle DNSSEC records (per RFC3225), even if
all we do is silently drop them. This feature requires EDNS0 support.
As we do not yet support larger UDP packets, this feature increases the
risk of getting truncated packets.
Similarly to how we fall back to plain UDP if EDNS0 fails, we will fall
back to plain EDNS0 if EDNS0+DO fails (with the same logic of remembering
success and retrying after a grace period after failure).
|
|
This is a minimal implementation of RFC6891. Only default values
are used, so in reality this will be a noop.
EDNS0 support is dependent on the current server's feature level,
so appending the OPT pseudo RR is done when the packet is emitted,
rather than when it is assembled. To handle different feature
levels on retransmission, we strip off the OPT RR again after
sending the packet.
Similarly, to how we fall back to TCP if UDP fails, we fall back
to plain UDP if EDNS0 fails (but if EDNS0 ever succeeded we never
fall back again, and after a timeout we will retry EDNS0).
|
|
Needed for EDNS0.
|
|
Previously, we would only degrade on packet loss, but when adding EDNS0 support,
we also have to handle the case where the server replies with an explicit error.
|
|
This is inspired by the logic in BIND [0], follow-up patches
will implement the reset of that scheme.
If we get a server error back, or if after several attempts we don't
get a reply at all, we switch from UDP to TCP for the given
server for the current and all subsequent requests. However, if
we ever successfully received a reply over UDP, we never fall
back to TCP, and once a grace-period has passed, we try to upgrade
again to using UDP. The grace-period starts off at five minutes
after the current feature level was verified and then grows
exponentially to six hours. This is to mitigate problems due
to temporary lack of network connectivity, but at the same time
avoid flooding the network with retries when the feature attempted
feature level genuinely does not work.
Note that UDP is likely much more commonly supported than TCP,
but depending on the path between the client and the server, we
may have more luck with TCP in case something is wrong. We really
do prefer UDP though, as that is much more lightweight, that is
why TCP is only the last resort.
[0]: <https://kb.isc.org/article/AA-01219/0/Refinements-to-EDNS-fallback-behavior-can-cause-different-outcomes-in-Recursive-Servers.html>
|
|
resolved: Flush caches more agressively, fixes #2038
|
|
|
|
After all, this is likely a local DNS forwarder that caches anyway,
hence there's no point in caching twice.
Fixes #2038.
|
|
After all /etc/resolv.conf is usually done when the network
configuration changes, which is a good reason to flush the global cache.
See: #2038
|
|
If /etc/resolv.conf is missing, this should not result in the server
list to be cleared, after all the native data from resolved.conf
shouldn't be flushed out then. Hence flush out the data only if
/etc/resolv.conf exists, but we cannot read it for some reason.
|
|
various smaller fixes, plus one that makes the build succeed again
|
|
|
|
It probably doesn't make sense to mix local and global configuration.
Applying global search lists to local DNS servers appears unnecessary
and creates problems because we'll traverse the search domains
non-simultaneously on multiple scopes.
Also see:
https://github.com/systemd/systemd/pull/2031
|
|
key per scope
When the zone probing code looks for a transaction to reuse it will
refuse to look at transactions that have been answered from cache or the
zone itself, but insist on the network. This has the effect that there
might be multiple transactions around for the same key on the same
scope. Previously we'd track all transactions in a hashmap, indexed by
the key, which implied that there would be only one transaction per key,
per scope. With this change the hashmap will only store the most recent
transaction per key, and a linked list will be used to track all
transactions per scope, allowing multiple per-key per-scope.
Note that the linked list fields for this actually already existed in
the DnsTransaction structure, but were previously unused.
|
|
Let's track where the data came from: from the network, the cache or the
local zone. This is not only useful for debugging purposes, but is also
useful when the zone probing wants to ensure it's not reusing
transactions that were answered from the cache or the zone itself.
|
|
DnsTransaction objects
Previously we'd only store the DnsPacket in the DnsTransaction, and the
DnsQuery would then take the DnsPacket's DnsAnswer and return it. With
this change we already pull the DnsAnswer out inside the transaction.
We still store the DnsPacket in the transaction, if we have it, since we
still need to determine from which peer a response originates, to
implement caching properly. However, the DnsQuery logic doesn't care
anymore for the packet, it now only looks at answers and rcodes from the
successfuly candidate.
This also has the benefit of unifying how we propagate incoming packets,
data from the local zone or the local cache.
|
|
Let's use a more useful way to write the flags. Also, leave some space
in the middle for the mDNS flags. After all, these flags are exposed on
the bus, and we should really make sure to expose flags that are going
to be stable, hence allow some room here...
(Not that the room really mattered, except to be nice to one's OCD)
|
|
resolved. Fully implement search domains for single-label names
|
|
|
|
The name RandomSec is too generic: "Sec" just specifies the default
unit type, and "Random" by itself is not enough. Rename to something
that should give the user general idea what the setting does without
looking at documentation.
|
|
core: support <soft:hard> ranges for RLIMIT options
|
|
man: Add a not that mount unit cannot be templated
|
|
minor resolved fixes
|
