summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-05-21timesyncd: save clock to disk everytime we get an NTP fix, and bump clock at ↵Lennart Poettering
boot using this This is useful to make sure the system clock stays monotonic even on systems that lack an RTC. Also, why we are at it, also use the systemd release time for bumping the clock, since it's a slightly less bad than starting with jan 1st, 1970. This also moves timesyncd into the early bootphase, in order to make sure this initial bump is guaranteed to have finished by the time we start real daemons which might write to the file systemd and thus shouldn't leave 1970's timestamps all over the place...
2014-05-20udevadm-settle: fixed return code for empty queueHarald Hoyer
If the udev queue is empty and "/run/udev/queue" does not exist, "udevadm settle" would return with EXIT_FAILURE, because the inotify on "/run/udev/queue" would fail with ENOENT. This patch lets "udevadm settle" exit with EXIT_SUCCESS in this case.
2014-05-19TODOSusant Sahani
IFLA_IPTUN_PMTUDISC IFLA_IPTUN_FLAGS (ISA_TAP) FLA_IPTUN_6RD_PREFIX FLA_IPTUN_6RD_RELAY_PREFIX IFLA_IPTUN_6RD_PREFIXLEN IFLA_IPTUN_6RD_RELAY_PREFIXLEN
2014-05-19networkd: introduce sit tunnelSusant Sahani
This patch introduces sit tunnel support to networkd Example conf: file: sit.netdev [NetDev] Name=sit-tun Kind=sit MTUBytes=1480 [Tunnel] Local=10.65.223.238 Remote=10.65.223.239 file: sit.network [Match] Name=em1 [Network] Tunnel=sit-tun [tomegun: rebased]
2014-05-19networkd-wait-online: wait for addresses to be configuredTom Gundersen
2014-05-19timesyncd: only attempt to connect when an address is configuredTom Gundersen
For now, we accept both link-local and routable addresses, maybe we want to restrict ourselves to routable addresses only.
2014-05-19networkd/sd-network: extend operational statesTom Gundersen
Expose states 'degraded' or 'routable' if a link has a site/link-local or a routable address, respectively.
2014-05-19networkd/sd-network: expose statically configured NTP serversTom Gundersen
2014-05-19networkd: fixup static DNS serializationTom Gundersen
2014-05-19sd-dhcp-lease/sd-network: modernization and fix leakTom Gundersen
2014-05-19resolved: add daemon to manage resolv.confTom Gundersen
Also remove the equivalent functionality from networkd.
2014-05-19sd-network: expose DNS informationTom Gundersen
2014-05-19networkd: link - serialize DNS informationTom Gundersen
2014-05-19sd-dhcp-lease: move in_addr (de)serialization to shared network codeTom Gundersen
2014-05-19sd-login: add C API to query primary session of a userLennart Poettering
2014-05-19logind: fix Display property of user objectsLennart Poettering
When we dropped support for creating a per-user to the "main" X11 display we stopped returning useful data in the "Display" user property. With this change this is fixed and we again expose an appropriate (graphical session) in the property that is useful as the "main" one, if one is needed.
2014-05-18gudev: add missing (nullable) annotations on return valuesEvan Nemerson
2014-05-19update TODOLennart Poettering
2014-05-19analyze: read host and system information from remoteDjalal Harouni
This makes "systemd-analyze plot" read host information from remote. While we are it show if this is a virtualized system. https://bugs.freedesktop.org/show_bug.cgi?id=76498 Reported-by: Zach <zachcook1991@gmail.com>
2014-05-19hostnamed: expose KernelVersion on the busDjalal Harouni
This is needed to fix bug: https://bugs.freedesktop.org/show_bug.cgi?id=76498 Reported-by: Zach <zachcook1991@gmail.com>
2014-05-19build: Compile everything with PIECristian Rodríguez
2014-05-19core: Filter by state behind the D-Bus API, not in the systemctl client.David Strauss
2014-05-19machined: make sure GetMachineAddresses() is available for unprivileged ↵Lennart Poettering
processes
2014-05-19fix spelling of privilegeNis Martensen
2014-05-18update TODOLennart Poettering
2014-05-18machined: add logic to query IP addresses of containersLennart Poettering
2014-05-18network: always take possession of host side of nspawn veth tunnels and do ↵Lennart Poettering
IPv4LL on them
2014-05-18update TODOLennart Poettering
2014-05-18timesyncd: make use of floating event sources for signal handlingLennart Poettering
2014-05-18timesyncd: enable watchdog supportLennart Poettering
2014-05-18timesyncd: run timesyncd as unpriviliged user "systemd-timesync" (but still ↵Lennart Poettering
with CAP_SYS_TIME)
2014-05-18man: note that entire sections can now be ignoredMichael Marineau
Prefixing a section name with "X-" will cause it and all of its contents to be silently ignored as of commit 342aea19.
2014-05-17networkd: log - only log about udev initalization on debug levelTom Gundersen
2014-05-17networkd: keep list of active addressesTom Gundersen
2014-05-17networkd: IP address equalityTom Gundersen
2014-05-17TODOTom Gundersen
2014-05-17udev: avoid use of uninitialized errThomas Hindoe Paaboel Andersen
After 1ea972174baba40dbc80c51cbfc4edc49764b59b err is no longer set unless we hit a special case. Initialize it to 0 and remove a check that will never fail.
2014-05-17systemctl: more cleanupThomas Hindoe Paaboel Andersen
This is followup on 05cae7f3431446236139434ee58a6275f3cb31e8 I think the intention was to use the newly introduced 'path' variable in the inner loop instead of p.
2014-05-17conf-parser: silently ignore sections starting with "X-"Michael Marineau
This allows external tools to keep additional unit information in a separate section without scaring users with a big warning.
2014-05-16man: logind.conf: fix grammar issues, unclear wording, and unclear default ↵Jason St. John
values
2014-05-16hwdb: Update database of Bluetooth company identifiersMarcel Holtmann
2014-05-16bus: fix unitialized variable access in error pathZbigniew Jędrzejewski-Szmek
2014-05-16networkd: add missing filesTom Gundersen
2014-05-16core: let selinux_setup() load policy more than onceWill Woods
When you switch-root into a new root that has SELinux policy, you're supposed to to run selinux_init_load_policy() to set up SELinux and load policy. Normally this gets handled by selinux_setup(). But if SELinux was already initialized, selinux_setup() skips loading policy and returns 0. So if you load policy normally, and then you switch-root to a new root that has new policy, selinux_setup() never loads the new policy. What gives? As far as I can tell, this check is an artifact of how selinux_setup() worked when it was first written (see commit c4dcdb9 / systemd v12): * when systemd starts, run selinux_setup() * if selinux_setup() loads policy OK, restart systemd So the "if policy already loaded, skip load and return 0" check was there to prevent an infinite re-exec loop. Modern systemd only calls selinux_setup() on initial load and after switch-root, and selinux_setup() no longer restarts systemd, so we don't need that check to guard against the infinite loop anymore. So: this patch removes the "return 0", thus allowing selinux_setup() to actually perform SELinux setup after switch-root. We still want to check to see if SELinux is initialized, because if selinux_init_load_policy() fails *but* SELinux is initialized that means we still have (old) policy active. So we don't need to halt if enforce=1.
2014-05-16logind: allow suspending if there are no displaysMantas Mikulėnas
With proprietary graphics drivers, there won't be any 'drm' devices in sysfs, so logind will never suspend the system upon closing the lid, even if only one (internal) display is connected. This has been reported by multiple users so far. IMHO, it's better to suspend the system in this case for safety reasons, to avoid having nvidia blob users' laptops overheat, for the same reason that sleep inhibitors are overridden (LidSwitchIgnoreInhibited=yes).
2014-05-16networkd: manager - read fallback DNS servers from config fileTom Gundersen
We will still use the compiled-in defaults if no DNS entry exists in the config file.
2014-05-16networkd: network - store DNS servers in List rather than SetTom Gundersen
This way we preserve the order of preference.
2014-05-16networkd: also add IPv6 DNS servers by defaultTom Gundersen
2014-05-16nspawn: properly format container_uuid in UUID formatLennart Poettering
http://lists.freedesktop.org/archives/systemd-devel/2014-April/018971.html
2014-05-16man: update journald rate limit defaultsMantas Mikulėnas
This brings the man page back into sync with the actual code.
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-08-15 21:22:00 +0000