summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-10coredump: rework coredumping logicLennart Poettering
This reworks the coredumping logic so that the coredump handler invoked from the kernel only collects runtime data about the crashed process, and then submits it for processing to a socket-activate coredump service, which extracts a stacktrace and writes the coredump to disk. This has a number of benefits: the disk IO and stack trace generation may take a substantial amount of resources, and hence should better be managed by PID 1, so that resource management applies. This patch uses RuntimeMaxSec=, Nice=, OOMScoreAdjust= and various sandboxing settings to ensure that the coredump handler doesn't take away unbounded resources from normally priorized processes. This logic is also nice since this makes sure the coredump processing and storage is delayed correctly until /var/systemd/coredump is mounted and writable. Fixes: #2286
2016-02-10activate: add a new switch --inetd to enable inetd-style socket activationLennart Poettering
Previously, using --accept would enable inetd-style socket activation in addition to per-connection operation. This is now split into two switches: --accept only switches between per-connection or single-instance operation. --inetd switches between inetd-style or new-style fd passing. This breaks the interface of the tool, but given that it is a debugging tool shipped in /usr/lib/systemd/ it's not really a public interface. This change allows testing new-style per-connection daemons.
2016-02-10activate: minor fixesLennart Poettering
2016-02-10activate: add new --seqpacket switch for testing SOCK_SEQPACKET socketsLennart Poettering
2016-02-10resolved: include inttypes.h in resolved-def.h given that we use UINT64_CLennart Poettering
2016-02-10build-sys: move coredump logic into subdir of its ownLennart Poettering
2016-02-10Merge pull request #2569 from zonque/removalsMartin Pitt
Remove some old cruft
2016-02-10Merge pull request #2571 from martinpitt/masterDaniel Mack
NEWS: Various clarification and grammar fixes
2016-02-10Merge pull request #2570 from zonque/buildMartin Pitt
configure.ac: Fix help text of --enable-* options
2016-02-10configure.ac: Fix help text of --enable-* optionsDaniel Mack
Fixes #2567
2016-02-10NEWS: Various clarification and grammar fixesMartin Pitt
2016-02-10tree-wide: remove Emacs lines from all filesDaniel Mack
This should be handled fine now by .dir-locals.el, so need to carry that stuff in every file.
2016-02-10Merge pull request #2564 from poettering/fix-2467Daniel Mack
Fix for #2467
2016-02-10Makefile.am: remove some relictsDaniel Mack
2016-02-10util-lib: make sure usec_sub() doesn't degrade USEC_INFINITYLennart Poettering
As suggested in: https://github.com/systemd/systemd/pull/2542#issuecomment-181877820
2016-02-10core: make the StartLimitXYZ= settings generic and apply to any kind of ↵Lennart Poettering
unit, not just services This moves the StartLimitBurst=, StartLimitInterval=, StartLimitAction=, RebootArgument= from the [Service] section into the [Unit] section of unit files, and thus support it in all unit types, not just in services. This way we can enforce the start limit much earlier, in particular before testing the unit conditions, so that repeated start-up failure due to failed conditions is also considered for the start limit logic. For compatibility the four options may also be configured in the [Service] section still, but we only document them in their new section [Unit]. This also renamed the socket unit failure code "service-failed-permanent" into "service-start-limit-hit" to express more clearly what it is about, after all it's only triggered through the start limit being hit. Finally, the code in busname_trigger_notify() and socket_trigger_notify() is altered to become more alike. Fixes: #2467
2016-02-10Merge pull request #2568 from poettering/prepare-229Daniel Mack
edit config updates, and a new NEWS file
2016-02-10Merge pull request #2563 from 0xAX/timespec_load_nsec-staticLennart Poettering
time-util: make timespec_load_nsec() static
2016-02-10time-util: make timespec_load_nsec() staticAlexander Kuleshov
The timespec_load_nsec() function has no callers outside of the time-util.c, so we can make it static.
2016-02-10NEWS: start putting together a NEWS file for 229Lennart Poettering
Totally incomplete, but let's get this started.
2016-02-10editors: only extend line width to 119 for C and XML filesLennart Poettering
For all other files leave the line width at 79 as before. This is a good idea since we generally don't want text files such as catalog files, unit files or README/NEWS files to be line-broken at 119 since they are regularly browsed on text terminals. While we are at it, also add a couple of comments to the various files. (Note that .editorconfig doesn't carry line-width information, simply because the specification doesn't know the concept.)
2016-02-09Merge pull request #2565 from poettering/fix-2315Zbigniew Jędrzejewski-Szmek
2016-02-09core: clarify which unit file is masked in error messageLennart Poettering
After all, the masked unit file error might be returned when enqueuing a unit that is not masked but requires a masked unit. In this case it should really be clear which unit is meant here.
2016-02-09man: link resolved bus API documentation from its man pageLennart Poettering
This is similar how we already do it for logind or machined.
2016-02-09units: downgrade dependency on /tmp in basic.target to Wants=Lennart Poettering
Now that requiring of a masked unit results in failure again, downgrade the dependency on /tmp to Wants= again, so that our suggested way to disable /tmp-on-tmpfs by masking doesn't result in a failing boot. References: #2315
2016-02-09core: change internal error code for masked units from EBADR to ESHUTDOWNLennart Poettering
This commit changes the mapping of the BUS_ERROR_UNIT_MASKED error to ESHUTDOWN. This error is used whenever the transaction engine is asked to operate on a masked unit. ESHUTDOWN is what is used for the similar case when the unit file enable/disable logic hits a masked unit file, hence is a natural candidate to be used here too. Background: before this patch both "job type not applicable" and "unit masked" where mapped to EBADR, which transaction_add_job_and_dependencies() then checked for. It actually wanted to check exclusively for the former error condition, not the latter but due to the same mapping this failed to work. This patch semi-undoes an accidental change made in caffa4ef700fdd0eadd6c0b2ef9925611672a1bc, however restores the error number to ESHUTDOWN instead of the original ENOSYS (for the reasons indicated above). To make this easier to grok for the future, I added comments to explaining which error conditions are checked for. Fixes: #2315
2016-02-09Merge pull request #2561 from msekletar/virtio-blk-by-pathLennart Poettering
path_id: reintroduce by-path links for virtio block devices
2016-02-09Merge pull request #2559 from chaloulo/drop_monotonicity_check_from_journal_fileLennart Poettering
journal: Drop monotonicity check when appending to journal file
2016-02-09Merge pull request #2557 from whot/hwdb-updatesLennart Poettering
hwdb: add Dell Lattitude E6320 pointing stick speed fix
2016-02-09path_id: reintroduce by-path links for virtio block devicesMichal Sekletar
Enumeration of virtio buses is global and hence non-deterministic. However, we are guaranteed there is never going to be more than one virtio bus per parent PCI device. While populating ID_PATH we simply skip virtio part of the syspath and we extend the path using the sysname of the parent PCI device. With this patch udev creates following by-path links for virtio-blk device /dev/vda which contains two partitions. ls -l /dev/disk/by-path/ total 0 lrwxrwxrwx 1 root root 9 Feb 9 10:47 virtio-pci-0000:00:05.0 -> ../../vda lrwxrwxrwx 1 root root 10 Feb 9 10:47 virtio-pci-0000:00:05.0-part1 -> ../../vda1 lrwxrwxrwx 1 root root 10 Feb 9 10:47 virtio-pci-0000:00:05.0-part2 -> ../../vda2 See: http://lists.linuxfoundation.org/pipermail/virtualization/2015-August/030328.html Fixes #2501
2016-02-09journal: Drop monotonicity check when appending to journal fileKlearchos Chaloulos
Remove the check that triggers rotation of the journal file when the arriving log entry had a monotonic timestamp smaller that the previous log entry. This check causes unnecessary rotations when journal-remote was receiving from multiple senders, therefore monotonicity can not be guaranteed. Also, it does not offer any useful functionality for systemd-journald.
2016-02-09hwdb: add Dell Lattitude E6320 pointing stick speed fixPeter Hutterer
https://bugzilla.redhat.com/show_bug.cgi?id=1200717
2016-02-09Merge pull request #2542 from 0xAX/get_ts_deltaLennart Poettering
time-util: cleanups
2016-02-08Merge pull request #2547 from 0xAX/generalize-format-timestamp-internalLennart Poettering
time-util: merge format_timestamp_internal() and format_timestamp_int…
2016-02-09time-util: introduce usec_sub()Alexander Kuleshov
The dual_timestamp_from_realtime(), dual_timestamp_from_monotonic() and dual_timestamp_from_boottime_or_monotonic() shares the same code for comparison given ts with delta. Let's move it to the separate inline function to prevent code duplication.
2016-02-09time-util: merge format_timestamp_internal() and format_timestamp_internal_us()Alexander Kuleshov
The time_util.c provides format_timestamp_internal() and format_timestamp_internal_us() functions for a timestamp formating. Both functions are very similar and differ only in formats handling. We can add additional boolean parameter to the format_timestamp_internal() function which will represent is a format for us timestamp or not. This allows us to get rid of format_timestamp_internal_us() that is prevent code duplication. We can remove format_timestamp_internal_us() safely, because it is static and has no users outside of the time_util.c. New fourth parameter will be passed inside of the format_timestamp(), format_timestamp_us() and etc, functions, but the public API is not changed.
2016-02-08Merge pull request #2535 from PhillipSz/remove-exit-0Lennart Poettering
test: remove exit 0 at the end
2016-02-08Merge pull request #2533 from keszybz/read-only-seedLennart Poettering
random-seed: provide nicer error message when unable to open file
2016-02-08Merge pull request #2549 from rhatdan/journalctlLennart Poettering
Journalctl command completion should show machines
2016-02-08Merge pull request #2550 from evverx/fix-457Lennart Poettering
tests: fix #457
2016-02-08Journalctl command completion should show machinesDan Walsh
2016-02-08Merge pull request #2543 from keszybz/build-sys-and-man-fixesLennart Poettering
Build sys and man fixes
2016-02-08tests: fix #457Evgeny Vereshchagin
There are some limits on XFS: major_max=511 minor_max=262143 see https://github.com/torvalds/linux/blob/master/fs/xfs/xfs_iops.c if (S_ISCHR(mode) || S_ISBLK(mode)) { if (unlikely(!sysv_valid_dev(rdev) || MAJOR(rdev) & ~0x1ff)) return -EINVAL;
2016-02-07Merge pull request #2546 from torstehu/fix-typo3Zbigniew Jędrzejewski-Szmek
treewide: fix typos and spacing
2016-02-07Merge pull request #2536 from vcaputo/journal-misc-cleanupsZbigniew Jędrzejewski-Szmek
journal: miscellaneous cleanups
2016-02-07Merge pull request #2541 from mgorny/append-flags-fixZbigniew Jędrzejewski-Szmek
build-sys: Perform flag tests in context of existing flags
2016-02-07treewide: fix typos and spacingTorstein Husebø
2016-02-06random-seed: provide nicer error message when unable to open fileZbigniew Jędrzejewski-Szmek
If /var is read-only, and the seed file does not exist, we would print a misleading error message for ENOENT. Print both messages instead, to make it easy to diagonose. Also, treat the cases of missing seed file the same as empty seed file and exit successfully. Initialize the return code properly. Fixes https://github.com/systemd/systemd/issues/2530, https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=813599.
2016-02-06shell-completion: fix headerZbigniew Jędrzejewski-Szmek
2016-02-06man: clarify that generators are run before /varZbigniew Jędrzejewski-Szmek
Just a clarification. At least systemd-openqa-generator from openqa gets this wrong.