summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-05-19journalctl: Improve boot ID lookupJan Janssen
This method should greatly improve offset based lookup, by simply jumping from one boot to the next boot. It starts at the journal head to get the a boot ID, makes a _BOOT_ID match and then comes from the opposite journal direction (tail) to get to the end that boot. After flushing the matches and advancing the journal from that exact position, we arrive at the start of next boot. Rinse and repeat. This is faster than the old method of aggregating the full boot listing just so we can jump to a specific boot, which can be a real pain on big journals just for a mere "-b -1" case. As an additional benefit --list-boots should improve slightly too, because it does less seeking. Note that there can be a change in boot order with this lookup method because it will use the order of boots in the journal, not the realtime stamp stored in them. That's arguably better, though. Another deficiency is that it will get confused with boots interleaving in the journal, therefore, it will refuse operation in --merge, --file and --directory mode. https://bugs.freedesktop.org/show_bug.cgi?id=72601
2015-05-18udevd: main - use _exit() when daemonizingTom Gundersen
Makes it a bit clearer what is going on, rather than jumping to the end of main(). No functional change.
2015-05-18udevd: main - reshuffleTom Gundersen
First parse config, then sanitize environment before donig any further setup. No functional change.
2015-05-18udevd: rename on_reque_{exit,reload} to on_sig{term,chld}Tom Gundersen
No functional change.
2015-05-18udevd: introduce on_event_timeout{,_warning}Tom Gundersen
This uses kill_and_sigcont() instead of kill(), otherwise no functional change.
2015-05-18udevd: process all SIGCHLD events every time the handler is invokedTom Gundersen
We were returning rather than continuing in some cases. The intention was always to fully process all pending events before returning from the SIGCHLD handler. Restore this behaviour.
2015-05-18udevd: init/exit the builtins in manager_new/freeTom Gundersen
No functional change.
2015-05-18udevd: move file descriptors to ManagerTom Gundersen
No functional change.
2015-05-18resolved: allow DnsAnswer objects with no space for RRsLennart Poettering
They might be created as result of merged answer sets, hence accept them. http://lists.freedesktop.org/archives/systemd-devel/2015-April/030834.html
2015-05-18resolved: fix crash when shutting downLennart Poettering
Reported by Cristian Rodríguez http://lists.freedesktop.org/archives/systemd-devel/2015-May/031626.html
2015-05-18nspawn: close extra fds before execing initAlban Crequy
When systemd-nspawn gets exec*()ed, it inherits the followings file descriptors: - 0, 1, 2: stdin, stdout, stderr - SD_LISTEN_FDS_START, ... SD_LISTEN_FDS_START+LISTEN_FDS: file descriptors passed by the system manager (useful for socket activation). They are passed to the child process (process leader). - extra lock fd: rkt passes a locked directory as an extra fd, so the directory remains locked as long as the container is alive. systemd-nspawn used to close all open fds except 0, 1, 2 and the SD_LISTEN_FDS_START..SD_LISTEN_FDS_START+LISTEN_FDS. This patch delays the close just before the exec so the nspawn process (parent) keeps the extra fds open. This patch supersedes the previous attempt ("cloexec extraneous fds"): http://lists.freedesktop.org/archives/systemd-devel/2015-May/031608.html
2015-05-18ata_id: drop spurious spaceLennart Poettering
2015-05-18CODING_STYLE: document that we should avoid kernel types like u32Lennart Poettering
2015-05-18core: Private*/Protect* options with RootDirectoryAlban Crequy
When a service is chrooted with the option RootDirectory=/opt/..., then the options PrivateDevices, PrivateTmp, ProtectHome, ProtectSystem must mount the directories under $RootDirectory/{dev,tmp,home,usr,boot}. The test-ns tool can test setup_namespace() with and without chroot: $ sudo TEST_NS_PROJECTS=/home/lennart/projects ./test-ns $ sudo TEST_NS_CHROOT=/home/alban/debian-tree TEST_NS_PROJECTS=/home/alban/debian-tree/home/alban/Documents ./test-ns
2015-05-18kmod-setup: conditionalize kmod autoloading properlyLennart Poettering
Load kdbus.ko only if we are built with kdbus, and load ip_tables.ko only if we are built with iptables support.
2015-05-18util: split all hostname related calls into hostname-util.cLennart Poettering
2015-05-18README: document that we prefer if CONFIG_CHECKPOINT_RESTORE is turned on, ↵Lennart Poettering
for the kcmp() syscall
2015-05-18fstab-generator: add x-systemd.requires and x-systemd.requires-mounts-forKarel Zak
Currently we have no way how to specify dependencies between fstab entries (or another units) in the /etc/fstab. It means that users are forced to bypass fstab and write .mount units manually. The patch introduces new systemd fstab options: x-systemd.requires=<PATH> - to specify dependence an another mount (PATH is translated to unit name) x-systemd.requires=<UNIT> - to specify dependence on arbitrary UNIT x-systemd.requires-mounts-for=<PATH ...> - to specify dependence on another paths, implemented by RequiresMountsFor=. The option may be specified more than once. For example two bind mounts where B depends on A: /mnt/test/A /mnt/test/A none bind,defaults /mnt/test/A /mnt/test/B none bind,x-systemd.requires=/mnt/test/A More complex example with overlay FS where one mount point depends on "low" and "upper" directories: /dev/sdc1 /mnt/low ext4 defaults /dev/sdc2 /mnt/high ext4 defaults overlay /mnt/merged overlay lowerdir=/mnt/low,upperdir=/mnt/high/data,workdir=/mnt/high/work,x-systemd.requires-mounts-for=/mnt/low,x-systemd.requires-mounts-for=mnt/high https://bugzilla.redhat.com/show_bug.cgi?id=812826 https://bugzilla.redhat.com/show_bug.cgi?id=1164334
2015-05-18buildsys: actually install 70-pointingstick.hwdbMantas Mikulėnas
2015-05-18hwdb: Add trackpoint sensitivity setting for Thinkpad X230 tabletHans de Goede
This model needs the trackpoint sensitivity to be boosted to not be too slow to be usable, see: https://bugzilla.redhat.com/show_bug.cgi?id=1200717
2015-05-18zsh-completion: make the arrays _sys_active_units, _sys_startable_units and ↵Eric Cook
_sys_restartable_units local to the completer.
2015-05-18zsh-completion: removing more pointless forksEric Cook
I seem to have forgot about _systemctl_active_units().
2015-05-18zsh-completion: less forking in _systemctl_failed_units() and make the array ↵Eric Cook
`_sys_failed_units' local to the completer.
2015-05-18zsh-completion: less forking in _systemctl_get_template_names()Eric Cook
2015-05-18zsh-completion: actually complete template names for subcommands enable, ↵Eric Cook
reenable and disable. compadd's -a option treats non-option arguments as arrays. So $(_systemctl_get_template_names) expands to some words that aren't legal array names. Even if there were, they would be empty; thus adding nothing. deduplicated a few functions too.
2015-05-18zsh-completion: actually run _filter_units_by_property when creating the ↵Eric Cook
arrays _sys_(re|)startable_units
2015-05-18Use "new" --job-mode= option in more placesZbigniew Jędrzejewski-Szmek
--irreversible/--ignore-dependencies/--fail are deprececated since 4dc5b821ae737914499119e29811fc3346e3d97c. Also add shell completions for --jobs-mode.
2015-05-16load-fragment: put quotes around iffy rvalueZbigniew Jędrzejewski-Szmek
2015-05-16Use fflush_and_check() in more placesZbigniew Jędrzejewski-Szmek
2015-05-16buildsys: Remove X_SERVER from AM_CPPFLAGSCristian Rodríguez
It is a leftover from multi-seat-x wrapper which is long gone.
2015-05-16zsh-completion: add missing completions for systemd-nspawnLukas Rusak
2015-05-16zsh-completion: update -M completion for systemd-analyzeLukas Rusak
2015-05-16zsh-completion: add missing completions for machinectlLukas Rusak
Appologies, I'm still getting used to this mailing list thing and using git send-email
2015-05-16udevd: queue - update queue state when events are queued/freedTom Gundersen
This way it is more obvious that the queue flag file is always up-to-date. Moreover, we only have to touch/unlink it when the first/last event is allocated/freed.
2015-05-16udevd: on_worker - distinguish between EINTR and EAGAINTom Gundersen
EAGAIN means there are no more messages to read, so give up. EINTR means we got interrupted reading a message, so try again.
2015-05-16udevd: worker - use loop_write() rather than send()Tom Gundersen
When notifying the main daemon about event completion, make sure the message is sent successfully, and not interrupted.
2015-05-16util: loop_write - accept 0-length messageTom Gundersen
write() can send empty messages, so make sure loop_write() can do the same.
2015-05-16udevd: net - fix leak in .link configTom Gundersen
Path, Driver and Type are now strv rather than strings, so free them properly.
2015-05-15udev-ctrl: make _unref() always return NULLTom Gundersen
Bring this in line with the rest of the codebase.
2015-05-15units: make networkd pull in its own .busname unitTom Gundersen
The daemon requires the busname unit to operate (on kdbus systems), since it contains the policy that allows it to acquire its service name. This fixes https://bugs.freedesktop.org/show_bug.cgi?id=90287
2015-05-15tmpfiles: use lstat() instead of stat() when checking whether a file system ↵Lennart Poettering
object already exists
2015-05-15tmpfiles: don't fail if we cannot create a subvolume because a file system ↵Lennart Poettering
is read-only but a dir already exists anyway https://bugs.freedesktop.org/show_bug.cgi?id=90281
2015-05-15CODING_STYLE: document that EXIT_FAILURE and EXIT_SUCCESS should be usedLennart Poettering
2015-05-15CODING_STYLE: document best practices when initializing structsLennart Poettering
2015-05-15coredump: make sure we vacuum by defaultLennart Poettering
Only if both keep_free and max_use are actually 0 we can shortcut things and avoid vacuuming. If either are positive or -1 we need to execute the vacuuming. http://lists.freedesktop.org/archives/systemd-devel/2015-April/031382.html
2015-05-15socket-util: socket_address_parse() should not log errors on its ownLennart Poettering
Given that socket_address_parse() is mostly a "library" call it shouldn't log on its own, but leave that to its caller. This patch removes logging from the call in case IPv6 is not available but and IPv6 address shall be parsed. Instead a new call socket_address_parse_and_warn() is introduced which first invokes socket_address_parse() and then logs if necessary. This should fix "make check" on ipv6-less kernels: http://lists.freedesktop.org/archives/systemd-devel/2015-April/031385.html
2015-05-15core: Fix assertion with empty Exec*= pathsMartin Pitt
An Exec*= line with whitespace after modifiers, like ExecStart=- /bin/true is considered to have an empty command path. This is as specified, but causes systemd to crash with Assertion 'skip < l' failed at ../src/core/load-fragment.c:607, function config_parse_exec(). Aborting. Aborted (core dumped) Fix this by logging an error instead and ignoring the invalid line. Add corresponding test cases. Also add a test case for a completely empty value which resets the command list. https://launchpad.net/bugs/1454173
2015-05-15timedate: fix memory leak in timedatedCristian Rodríguez
$ /usr/lib/systemd/systemd-timedated (wait until auto-exit) ================================================================= ==396==ERROR: LeakSanitizer: detected memory leaks Direct leak of 928 byte(s) in 1 object(s) allocated from: #0 0x7f782f788db1 in __interceptor_calloc (/usr/lib64/libasan.so.2+0x96db1) #1 0x562a83ae60cf in bus_message_from_header src/libsystemd/sd-bus/bus-message.c:480 #2 0x562a83ae6f5a in bus_message_from_malloc src/libsystemd/sd-bus/bus-message.c:576 #3 0x562a83ad3cad in bus_socket_make_message src/libsystemd/sd-bus/bus-socket.c:915 #4 0x562a83ad4cfc in bus_socket_read_message src/libsystemd/sd-bus/bus-socket.c:1051 #5 0x562a83ab733f in bus_read_message src/libsystemd/sd-bus/sd-bus.c:1647 #6 0x562a83ab98ea in sd_bus_call src/libsystemd/sd-bus/sd-bus.c:2038 #7 0x562a83b1f46d in sd_bus_call_method src/libsystemd/sd-bus/bus-convenience.c:94 #8 0x562a83aab3e1 in context_read_ntp src/timedate/timedated.c:192 #9 0x562a83aae1af in main src/timedate/timedated.c:730 #10 0x7f782eb238c4 in __libc_start_main (/lib64/libc.so.6+0x208c4) Indirect leak of 77 byte(s) in 1 object(s) allocated from: #0 0x7f782f788f6a in realloc (/usr/lib64/libasan.so.2+0x96f6a) #1 0x562a83ad418a in bus_socket_read_message src/libsystemd/sd-bus/bus-socket.c:963 #2 0x562a83ab733f in bus_read_message src/libsystemd/sd-bus/sd-bus.c:1647 #3 0x562a83ab98ea in sd_bus_call src/libsystemd/sd-bus/sd-bus.c:2038 #4 0x562a83b1f46d in sd_bus_call_method src/libsystemd/sd-bus/bus-convenience.c:94 #5 0x562a83aab3e1 in context_read_ntp src/timedate/timedated.c:192 #6 0x562a83aae1af in main src/timedate/timedated.c:730 #7 0x7f782eb238c4 in __libc_start_main (/lib64/libc.so.6+0x208c4) Indirect leak of 2 byte(s) in 1 object(s) allocated from: #0 0x7f782f75493f in strdup (/usr/lib64/libasan.so.2+0x6293f) #1 0x562a83b0229b in bus_message_parse_fields src/libsystemd/sd-bus/bus-message.c:5382 #2 0x562a83ae7290 in bus_message_from_malloc src/libsystemd/sd-bus/bus-message.c:601 #3 0x562a83ad3cad in bus_socket_make_message src/libsystemd/sd-bus/bus-socket.c:915 #4 0x562a83ad4cfc in bus_socket_read_message src/libsystemd/sd-bus/bus-socket.c:1051 #5 0x562a83ab733f in bus_read_message src/libsystemd/sd-bus/sd-bus.c:1647 #6 0x562a83ab98ea in sd_bus_call src/libsystemd/sd-bus/sd-bus.c:2038 #7 0x562a83b1f46d in sd_bus_call_method src/libsystemd/sd-bus/bus-convenience.c:94 #8 0x562a83aab3e1 in context_read_ntp src/timedate/timedated.c:192 #9 0x562a83aae1af in main src/timedate/timedated.c:730 #10 0x7f782eb238c4 in __libc_start_main (/lib64/libc.so.6+0x208c4) SUMMARY: AddressSanitizer: 1007 byte(s) leaked in 3 allocation(s). This is due to missing _cleanup_bus_message_unref_ in context_read_ntp()
2015-05-15.gitignore: add GNU GLOBAL filesŁukasz Stelmach
2015-05-15generator: use fflush_and_check() where appropriateLennart Poettering
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-09-19 12:39:27 +0000