summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-13tree-wide: check if errno is greater then zeroZbigniew Jędrzejewski-Szmek
gcc is confused by the common idiom of return errno ? -errno : -ESOMETHING and thinks a positive value may be returned. Replace this condition with errno > 0 to help gcc and avoid many spurious warnings. I filed a gcc rfe a long time ago, but it hard to say if it will ever be implemented [1]. Both conventions were used in the codebase, this change makes things more consistent. This is a follow up to bcb161b0230f. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61846
2016-01-12Merge pull request #490 from pyssling/masterLennart Poettering
Add machine-id setting
2016-01-12core: Add machine-id settingNils Carlson
Allow for overriding all other machine-ids which may be present on the system using a kernel command line systemd.machine_id or --machine-id= option. This is especially useful for network booted systems where the machine-id needs to be static, or for containers where a specific machine-id is wanted.
2016-01-12Merge pull request #2131 from evverx/regenerate-m4-on-reconfigureLennart Poettering
build-sys: regenerate %.m4 -> % on reconfigure
2016-01-12Merge pull request #2310 from vcaputo/sd-event-profiling-fixupsLennart Poettering
sd-event: minor fixups to delays profiling changes
2016-01-12sd-event: minor fixups to delays profiling changesVito Caputo
2016-01-12Merge pull request #2147 from vcaputo/sd-event-measure-latenciesLennart Poettering
sd-event: instrument sd_event_run() for profiling delays
2016-01-12sd-event: instrument sd_event_run() for profiling delaysVito Caputo
Set SD_EVENT_PROFILE_DELAYS to activate accounting and periodic logging of the distribution of delays between sd_event_run() calls. Time spent in dispatching as well as time spent outside of sd_event_run() is measured and accounted for. Every 5 seconds a logarithmic histogram loop iteration delays since 5 seconds previous is logged. This is useful in identifying the frequency and magnitude of latencies affecting the event loop, which should be kept to a minimum.
2016-01-12Merge pull request #2308 from zonque/xsprintfLennart Poettering
tree-wide: use xsprintf() where applicable
2016-01-12tree-wide: use xsprintf() where applicableDaniel Mack
Also add a coccinelle receipt to help with such transitions.
2016-01-12Merge pull request #2265 from ipuustin/ambientLennart Poettering
capabilities: added support for ambient capabilities.
2016-01-12Merge pull request #2303 from aadamowski/fix-miscalculated-bufferDaniel Mack
Fix miscalculated buffer size and uses of size-unlimited sprintf()
2016-01-12man: add AmbientCapabilities entry.Ismo Puustinen
2016-01-12tests: test ambient capabilities.Ismo Puustinen
The ambient capability tests are only run if the kernel has support for ambient capabilities.
2016-01-12capabilities: added support for ambient capabilities.Ismo Puustinen
This patch adds support for ambient capabilities in service files. The idea with ambient capabilities is that the execed processes can run with non-root user and get some inherited capabilities, without having any need to add the capabilities to the executable file. You need at least Linux 4.3 to use ambient capabilities. SecureBit keep-caps is automatically added when you use ambient capabilities and wish to change the user. An example system service file might look like this: [Unit] Description=Service for testing caps [Service] ExecStart=/usr/bin/sleep 10000 User=nobody AmbientCapabilities=CAP_NET_ADMIN CAP_NET_RAW After starting the service it has these capabilities: CapInh: 0000000000003000 CapPrm: 0000000000003000 CapEff: 0000000000003000 CapBnd: 0000003fffffffff CapAmb: 0000000000003000
2016-01-12capabilities: keep bounding set in non-inverted format.Ismo Puustinen
Change the capability bounding set parser and logic so that the bounding set is kept as a positive set internally. This means that the set reflects those capabilities that we want to keep instead of drop.
2016-01-12Merge pull request #2290 from vcaputo/normalize-log-source-prioritiesLennart Poettering
journal: normalize priority of logging sources
2016-01-11Fix miscalculated buffer size and uses of size-unlimited sprintf()Aleksander Adamowski
function. Not sure if this results in an exploitable buffer overflow, probably not since the the int value is likely sanitized somewhere earlier and it's being put through a bit mask shortly before being used.
2016-01-11Merge pull request #2289 from poettering/dnssec13Tom Gundersen
Thirteenth DNSSEC patch set
2016-01-11resolved: improve query RR type error wording a bitLennart Poettering
2016-01-11resolved: don#t allow explicit queries for RRSIG RRsLennart Poettering
We wouldn't know how to validate them, since they are the signatures, and hence have no signatures.
2016-01-11resolved: refuse doing queries for known-obsolete RR typesLennart Poettering
Given how fragile DNS servers are with some DNS types, and given that we really should avoid confusing them with known-weird lookups, refuse doing lookups for known-obsolete RR types.
2016-01-11resolved: rename DnsTransaction's current_features field to ↵Lennart Poettering
current_feature_level This is a follow-up for f4461e5641d53f27d6e76e0607bdaa9c0c58c1f6.
2016-01-11resolved: split out resetting of DNS server counters into a function call of ↵Lennart Poettering
its own A suggested by Vito Caputo: https://github.com/systemd/systemd/pull/2289#discussion-diff-49276220
2016-01-11resolved: accept rightfully unsigned NSEC responsesLennart Poettering
2016-01-11resolved: rework how and when we detect whether our chosen DNS server knows ↵Lennart Poettering
DNSSEC Move detection into a set of new functions, that check whether one specific server can do DNSSEC, whether a server and a specific transaction can do DNSSEC, or whether a transaction and all its auxiliary transactions could do so. Also, do these checks both before we acquire additional RRs for the validation (so that we can skip them if the server doesn't do DNSSEC anyway), and after we acquired them all (to see if any of the lookups changed our opinion about the servers). THis also tightens the checks a bit: a server that lacks TCP support is considered incompatible with DNSSEC too.
2016-01-11resolved: cache formatted server string in DnsServer structureLennart Poettering
This makes it easier to log information about a specific DnsServer object.
2016-01-11resolved: rework server feature level logicLennart Poettering
This changes the DnsServer logic to count failed UDP and TCP failures separately. This is useful so that we don't end up downgrading the feature level from one UDP level to a lower UDP level just because a TCP connection we did because of a TC response failed. This also adds accounting of truncated packets. If we detect incoming truncated packets, and count too many failed TCP connections (which is the normal fall back if we get a trucnated UDP packet) we downgrade the feature level, given that the responses at the current levels don't get through, and we somehow need to make sure they become smaller, which they will do if we don't request DNSSEC or EDNS support. This makes resolved work much better with crappy DNS servers that do not implement TCP and only limited UDP packet sizes, but otherwise support DNSSEC RRs. They end up choking on the generally larger DNSSEC RRs and there's no way to retrieve the full data.
2016-01-11resolved: add missing case to switch statementLennart Poettering
2016-01-11resolved: log why we use TCP when UDP isn't supported by a serverLennart Poettering
2016-01-11resolved: log about truncated replies before trying again, not afterLennart Poettering
2016-01-11resolved: don't attempt to send queries for DNSSEC RR types to servers not ↵Lennart Poettering
supporting them If we already degraded the feature level below DO don't bother with sending requests for DS, DNSKEY, RRSIG, NSEC, NSEC3 or NSEC3PARAM RRs. After all, we cannot do DNSSEC validation then anyway, and we better not press a legacy server like this with such modern concepts. This also has the benefit that when we try to validate a response we received using DNSSEC, and we detect a limited server support level while doing so, all further auxiliary DNSSEC queries will fail right-away.
2016-01-11resolved: log about reasons for switching to TCPLennart Poettering
2016-01-11resolved: when we get a packet failure from a server, don't downgrade UDP to ↵Lennart Poettering
TCP or vice versa Under the assumption that packet failures (i.e. FORMERR, SERVFAIL, NOTIMP) are caused by packet contents, not used transport, we shouldn't switch between UDP and TCP when we get them, but only downgrade the higher levels down to UDP.
2016-01-11resolved: properly handle UDP ICMP errors as lost packetsLennart Poettering
UDP ICMP errors are reported to us via recvmsg() when we read a reply. Handle this properly, and consider this a lost packet, and retry the connection. This also adds some additional logging for invalid incoming packets.
2016-01-11resolved: when we get a TCP connection failure, try againLennart Poettering
Previously, when we couldn't connect to a DNS server via TCP we'd abort the whole transaction using a "connection-failure" state. This change removes that, and counts failed connections as "lost packet" events, so that we switch back to the UDP protocol again.
2016-01-11resolved: when DNS/TCP doesn't work, try DNS/UDP againLennart Poettering
If we failed to contact a DNS server via TCP, bump of the feature level to UDP again. This way we'll switch back between UDP and TCP if we fail to contact a host. Generally, we prefer UDP over TCP, which is why UDP is a higher feature level. But some servers only support UDP but not TCP hence when reaching the lowest feature level of TCP and want to downgrade from there, pick UDP again. We this keep downgrading until we reach TCP and then we cycle through UDP and TCP.
2016-01-11resolved: introduce dns_transaction_retry() and use it everywhereLennart Poettering
The code to retry transactions has been used over and over again, simplify it by replacing it by a new function.
2016-01-11resolved: set a description on all our event sourcesLennart Poettering
2016-01-11resolved: fix error propagationLennart Poettering
2016-01-11shared: make sure foo.bar and foobar result in different domain name hashesLennart Poettering
This also introduces a new macro siphash24_compress_byte() which is useful to add a single byte into the hash stream, and ports one user over to it.
2016-01-11basic: split hash functions into their own header filesLennart Poettering
The hash operations are not really that specific to hashmaps, hence split them into a .c module of their own.
2016-01-11editors: specify fill columnLennart Poettering
Let's be a bit more precise with the editor configuration and specify a higher fill column of 119. This isn't as emacs' default of 70, but also not particularly high on today's screens. While we are at it, also set a couple of other emacs C coding style variables.
2016-01-11resolved: properly look for NSEC/NSEC3 RRs when getting a positive wildcard ↵Lennart Poettering
response This implements RFC 5155, Section 8.8 and RFC 4035, Section 5.3.4: When we receive a response with an RRset generated from a wildcard we need to look for one NSEC/NSEC3 RR that proves that there's no explicit RR around before we accept the wildcard RRset as response. This patch does a couple of things: the validation calls will now identify wildcard signatures for us, and let us know the RRSIG used (so that the RRSIG's signer field let's us know what the wildcard was that generate the entry). Moreover, when iterating trough the RRsets of a response we now employ three phases instead of just two. a) in the first phase we only look for DNSKEYs RRs b) in the second phase we only look for NSEC RRs c) in the third phase we look for all kinds of RRs Phase a) is necessary, since DNSKEYs "unlock" more signatures for us, hence we shouldn't assume a key is missing until all DNSKEY RRs have been processed. Phase b) is necessary since NSECs need to be validated before we can validate wildcard RRs due to the logic explained above. Phase c) validates everything else. This phase also handles RRsets that cannot be fully validated and removes them or lets the transaction fail.
2016-01-11resolved: split up nsec3_hashed_domain() into two callsLennart Poettering
There's now nsec3_hashed_domain_format() and nsec3_hashed_domain_make(). The former takes a hash value and formats it as domain, the latter takes a domain name, hashes it and then invokes nsec3_hashed_domain_format(). This way we can reuse more code, as the formatting logic can be unified between this call and another place.
2016-01-11resolved: drop flags unused parameter from nsec3_is_goodLennart Poettering
2016-01-11resolved: when validating, first strip revoked trust anchor keys from ↵Lennart Poettering
validated keys list When validating a transaction we initially collect DNSKEY, DS, SOA RRs in the "validated_keys" list, that we need for the proofs. This includes DNSKEY and DS data from our trust anchor database. Quite possibly we learn that some of these DNSKEY/DS RRs have been revoked between the time we request and collect those additional RRs and we begin the validation step. In this case we need to make sure that the respective DS/DNSKEY RRs are removed again from our list. This patch adds that, and strips known revoked trust anchor RRs from the validated list before we begin the actual validation proof, and each time we add more DNSKEY material to it while we are doing the proof.
2016-01-11shared: simplify dns_name_hash_func() end of name detectionLennart Poettering
2016-01-11resolved: make sure domain name hash function deals nicely with NUL embedded ↵Lennart Poettering
in labels
2016-01-11basic: introduce generic ascii_strlower_n() call and make use of it everywhereLennart Poettering