| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
The dnf name is here to stay, we might as well adjust.
|
|
|
|
From fd.o bug 88898:
systemd-resolved fails to start:
Failed to drop capabilities: Operation not permitted
Broken in f11943c53ec181829a821c6b27acf828bab71caa.
Drop all capabilities:
1. prctl(PR_SET_KEEPCAPS, keep_capabilities != 0) // 0 when we drop all
capabilities
2. setresuid() // bye bye capabilities
3. Add CAP_SETPCAP // fails because we have no capabilities
4. Reduce capability bounding set
5. Drop capabilities
6. prctl(PR_SET_KEEPCAPS, 0)
Capabilites should always be kept after setresuid() so that the capability
bounding set can be reduced.
Based-on-a-patch-by: mustrumr97@gmail.com
https://bugs.freedesktop.org/show_bug.cgi?id=88898
We must be careful not to leave PR_SET_KEEPCAPS on. We could use the
setresuid() call to drop capabilities, but the rules when capabilities
are dropped are fairly complex, since a transition to non-zero uid must
happen. Let's instead keep the capabilities during setresuid(), and drop
them later.
|
|
This was broken when the code was rearranged in "1e2fd62d70ff
core/load-fragment.c: correct argument sign and split up long lines"
|
|
If we scale our buffer to be wide enough for the format string, we
should expect that the calculation was correct.
char_array_0() invocations are removed, since snprintf nul-terminates
the output in any case.
A similar wrapper is used for strftime calls, but only in timedatectl.c.
|
|
|
|
In the test, p is a path to a directory, always absolute. dent->d_name
is a single path component, so they cannot be equal. The comparison
was wrong also for other reasons: D type supports globs, so direct
comparisons using streq are not enough.
|
|
Services which are not crucial to system bootup, and have Type=oneshot
can effectively "hang" the system if they fail to complete for whatever
reason. To allow the boot to continue, kill them after a timeout.
In case of systemd-journal-flush the flush will continue in the background,
and in the other two cases the job will be aborted, but this should not
result in any permanent problem.
|
|
https://github.com/docker/docker/issues/10280
|
|
|
|
|
|
We would otherwise wait for the interface to be completely configured, which
could take considerable time with IPv4LL. As a result nspawn was very slow
at obtaining IP addresses.
|
|
In addition to the loopback device, also explicitly configured devices to be ignored.
Suggested by Charles Devereaux <systemd@guylhem.net>.
|
|
As in sd-bus, simply log at debug level when a callback fails, but don't fail the event handler.
Otherwise any error returned by any callback will disable the rtnl event handler. We should
only do that on serious internal errors in sd-rtnl that we know cannot be recovered from.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=88284
|
|
entirety as gvariant objects"
This breaks booting with kdbus.
This reverts commit b381de4197157748ed96e469fcc372c23f842ae1.
|
|
This reverts commit df6e44c4affced590b0d19c594d9301ffd436591.
systemd --version segfaults.
Starting program: /usr/lib/systemd/systemd --version
Missing separate debuginfos, use: debuginfo-install systemd-216-16.fc21.x86_64
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
systemd 218
+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN
Program received signal SIGSEGV, Segmentation fault.
0x000055555557c9be in main (argc=2, argv=0x7fffffffe4d8) at src/core/main.c:1832
1832 arg_shutdown_watchdog = m->shutdown_watchdog;
(gdb) bt
(gdb) bt full
m = 0x0
|
|
Hi,
I did ./check-undocumented.sh -b (my script just submitted) and checked
the results.
Cheers.
|
|
Currently used to tag devices in the new Lenovo *50 series and the X1 Carbon
3rd. These laptops re-introduced the physical trackpoint buttons that were
missing from the *40 series but those buttons are now wired up to the
touchpad.
The touchpad now sends BTN_0, BTN_1 and BTN_2 for the trackpoint. The same
button codes were used in older touchpads that had dedicated scroll up/down
buttons. Input drivers need to work around this and thus know what they're
dealing with.
For the previous gen we introduced INPUT_PROP_TOPBUTTONPAD in the kernel, but
the resulting mess showed that these per-device quirks should really live in
userspace.
The list currently includes the X1 Carbon 3rd PNPID, others will be added as
get to know which PNPID they have.
|
|
This might be fixed one day, but for now it's better to fail.
https://bugzilla.redhat.com/show_bug.cgi?id=1186952
|
|
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=87354
|
|
This reverts commit b914ea8d379b446c4c9fac4ba181771676ef38cd.
We really need to put a limit on all our resources, everywhere, and in
particular if we operate on external data.
Hence, let's reintroduce the limit, but bump it substantially, so that
it is guaranteed to be higher than any realistic RLIMIT_NOFILE setting.
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=88284
|
|
modes
Would be awesome to expand on this a lot, as there is currently no decent documentation for most of these things.
|
|
|
|
It may happen that you have several sessions with the same VT:
- Open a session c1 which leaves some processes around, and log out. The
session will stay in State=closing and become Active=no.
- Log back in on the same VT, get a new session "c2" which is State=active and
Active=yes.
When restarting logind after that, the first session that matches the current
VT becomes Active=yes, which will be c1; c2 thus is Active=no and does not get
the usual polkit/device ACL privileges.
Restore the "closing" state in session_load(), to avoid treating all restored
sessions as State=active. In seat_active_vt_changed(), prefer active sessions
over closing ones if more than one session matches the current VT.
Finally, fix the confusing comment in session_load() and explain it a bit
better.
https://launchpad.net/bugs/1415104
|
|
|
|
|
|
|
|
Ejecting a CD with the hardware drive button only causes a change uevent, but
the device node stays around (just without a medium). Pick up these uevents and
mark the device as SYSTEMD_READY=0 on ejection, so that systemd stops the
device unit and consequently all mount units on it.
On media insertion, mark the device as SYSTEMD_READY=1 again.
https://bugs.freedesktop.org/show_bug.cgi?id=72206
https://bugzilla.opensuse.org/show_bug.cgi?id=909418
https://bugs.archlinux.org/task/42071
https://bugs.launchpad.net/bugs/1168742
|
|
Add unit dependencies for dynamic (i. e. not from fstab) mounts. With that,
mount units properly bind to their underlying device, and thus get
automatically stopped/unmounted when the underlying device goes away.
This cleans up stale mounts from unplugged devices.
Thanks to Lennart Poettering for pointing out the fix!
|
|
http://lists.freedesktop.org/archives/systemd-devel/2015-January/027594.html
|
|
changing unit state
Unit _start() and _stop() implementations can fail with -EAGAIN to delay
execution temporarily. Thus, we should not output status messages before
invoking these calls, but after, and only when we know that the
invocation actually made a change.
|
|
and start of list
|
|
|
|
|
|
Commit 4e48855534 caused the .sh suffix to be stripped from the original
"filename", which caused the generated units to call the wrong init.d script.
Only use the .sh stripped file name for comparing with Provides:, not for
generating the Exec*= lines.
Spotted by sysv-generator-test.
|
|
|
|
|
|
The help text, apart from being too long, did not describe what the options
really do.
|
|
|
|
|
|
on the console too
|
|
|
|
This should be useful for cases where clean rebooting doesn't work, and
the user wants to hurry up the reboot.
|
