| Age | Commit message (Collapse) | Author |
|---|
|
Rather than fixing this to 5s for unicast DNS and 1s for LLMNR, start
at a tenth of those values and increase exponentially until the old
values are reached. For LLMNR the recommended timeout for IEEE802
networks (which basically means all of the ones we care about) is 100ms,
so that should be uncontroversial. For unicast DNS I have found no
recommended value. However, it seems vastly more likely that hitting a
500ms timeout is casued by a packet loss, rather than the RTT genuinely
being greater than 500ms, so taking this as a startnig value seems
reasonable to me.
In the common case this greatly reduces the latency due to normal packet
loss. Moreover, once we get support for probing for features, this means
that we can send more packets before degrading the feature level whilst
still allowing us to settle on the correct feature level in a reasonable
timeframe.
The timeouts are tracked per server (or per scope for the multicast
protocols), and once a server (or scope) receives a successfull package
the timeout is reset. We also track the largest RTT for the given
server/scope, and always start our timouts at twice the largest
observed RTT.
|
|
We cannot rely on CLOCK_BOOTTIME being supported by the kernel, so fallack
to CLOCK_MONOTONIC if the former is not supported.
|
|
networkd: fix neworkd crash
|
|
man: fix typo in systemd-fsck@
|
|
|
|
sd-bus: Small cleanups (v2)
|
|
Both strv_free() and mfree() return NULL pointer after free.
|
|
Recently mfree() was introduced to reduce work of tedious free + reset
pointers. Use it in bus_reset_queues() too.
|
|
The safe_close() already checks the fd and returns -1.
|
|
fix issue #827
hostname should be init to NULL.
|
|
hwdb: add resolution information for Dell Vostro 1510 touchpad
|
|
Dell Vostro 1510, AlpsPS/2 ALPS GlidePoint touchpad.
Relevant issue: #763
|
|
busctl: make sure --address connects as bus-client
|
|
Add some more tests
|
|
tree-wide: introduce mfree()
|
|
CODING_STYLE: say that "for (;;)" is better than "while (1)"
|
|
There is really no reason to use `busctl` to connect to legacy private
bus endpoints. Fix this and make sure `busctl --address=unix:path=/foo`
works!
|
|
|
|
|
|
Add tests for safe_ato[iu]16() and some more unbase32hexmem() torture.
|
|
Test af-list and arphdr-list.
|
|
Pretty trivial helper which wraps free() but returns NULL, so we can
simplify this:
free(foobar);
foobar = NULL;
to this:
foobar = mfree(foobar);
|
|
busctl: Misc cleanups and a fix (v2)
|
|
Bitmap fixes v2
|
|
Using --size option triggers an assert failure below because
parse_size() requires the second argument, base, being either 1000 or
1024. As it's for a packet size, it'd be better using IEC binary
suffix (base 1024) IMHO.
$ busctl --size 2048
Assertion 'base == 1000 || base == 1024' failed at src/basic/util.c:2222,
function parse_size(). Aborting.
Aborted (core dumped)
|
|
The size option was to specify maximum captured patch length but was
missing its description in the command line help. Add it.
|
|
In member_compare_func(), it compares interface, type and name of
members. But as it can contain NULL pointer, it needs to check them
before calling strcmp(). So make it as a separate strcmp_ptr
function (named after streq_ptr) so that it can be used by others.
Also let streq_ptr() to use it in order to make the code simpler.
|
|
|
|
Given two bitmaps and the following code:
Bitmap *a = bitmap_new(), *b = bitmap_new();
bitmap_set(a, 1);
bitmap_clear(a);
bitmap_set(a, 0);
bitmap_set(b, 0);
These two bitmaps should now have the same bits set and they should be
equal but bitmap_equal() will return false in this case because while
bitmap_clear() resets the number of elements in the array it does not
clear the array and bitmap_set() expects the array to be cleared.
GREEDY_REALLOC0 looks at the allocated size and not the actual size so
it does not clear any memory.
Fix this by freeing the allocated memory and resetting the whole Bitmap
to an initial state in bitmap_clear().
This also adds test code for this issue.
|
|
Given two bitmaps and the following code:
Bitmap *a = bitmap_new(), *b = bitmap_new();
bitmap_set(a, 0);
bitmap_unset(a, 0);
These two bitmaps should now have the same bits set and they should be
equal but bitmap_equal() will return false in this case because the
bitmaps array in a is larger because of the bit which was previously
set.
Fix this by comparing only the bits which exists in both bitmaps and
then check that the rest of the bits (if any) is all zero.
This also adds test code for this issue.
|
|
There is no reason to prevent empty argument lists on
UpdateActivationEnvironment(). Make sure we don't fail, but still skip
the call to pid1.
|
|
Add new functionality and behavior changes to NEWS for the imminent bugfix
release 224.
|
|
Prepare for bug-fix release and bump versions.
|
|
|
|
bus-proxy: fix cookie namespacing
|
|
Make sure we release VT-positions when a session is closed. Otherwise,
lingering sessions will occupy VTs and prevent next logins from
succeeding.
Note that we already release session-devices when closing a session, so
there cannot be anyone using the VT anymore.
|
|
If we generate messages from within bus-proxyd, we really must make sure
that we do not clutter the cookie-namespace of our client. The client has
full control over it, so we cannot steal cookies from it. However, we can
re-use the cookie the client used for our request. As long as we only
send a single message, we're fine.
|
|
NSS plugins might create additional threads. Remove the limit, we cannot
really make any assumptions here.
|
|
build-sys: use 'test -f' instead of AC_CHECK_FILE
|
|
bus-proxy: make NameAcquired/Lost directed (v2)
|
|
bus-proxy: make StartServiceByName synchronous
|
|
The StartServiceByName() call was provided by dbus-daemon to activate a
service without sending a message. On receiption, dbus-daemon schedules
an activation request (different modes are supported) and sends back the
reply once activation is done.
With kdbus, we marked StartServiceByName() as deprecated. There is no
real reason to start services explicitly. Instead, applications should
just *use* the service and rely on it being activated implicitly.
However, we provide compatibility with dbus-daemon and implement
StartServiceByName() on the proxy via a call to
org.freedesktop.DBus.Peer.Ping() on the destination. This will activate
the peer implicitly as part of the no-op Ping() method call (regardless
whether the peer actually implements that call).
Now, the problem is, StartServiceByName() was synchronous on dbus-daemon
but isn't on bus-proxy. Hence, on return, there is no guarantee that
ListNames includes the activated name. As this is required by some
applications, we need to make this synchronous.
This patch makes the proxy track the Ping() method call and send the
reply of StartServiceByName() only once Ping() returned. We do not look
at possible errors of Ping(), as there is no strict requirement for the
peer to implement org.freedesktop.DBus.Peer. Furthermore, any interesting
error should have already been caught by sd_bus_send() before.
Note:
This race was triggered by gdbus. The gdbus-proxy implementation
relies on a name to be available after StartServiceByName()
returns. This is highly fragile and should be dropped by gdbus.
Even if the call is synchronous, there is no reason whatsoever to
assume the service did not exit-on-idle before ListNames()
returns.
However, this race is much less likely than the startup race, so
we try to be compatible to dbus-daemon now.
|
|
AC_CHECK_FILE fails when cross-compiling. It is intended to be used to
check for files that are used at runtime during build time (e.g.
/etc/passwd, /dev/*) [1]. For files which are only used at build time
'test -f' is sufficient.
[1]: https://lists.gnu.org/archive/html/autoconf/2000-10/msg00018.html
|
|
NameAcquired and NameLost are directed signals. Never ever filter them on
dbus1. On dbus1, filters *exclusively* apply to broadcasts! Hence, we
must always forward directed signals unconditionally!
|
|
The NameAcquired and NameLost signals are _directed_ signals. Make sure
we properly set the destination correctly, and verify it in our
proxy-test.
|
|
Probably a typo, checking 'ret' instead of the return value 'p'. This
might cause the function to return failure, even though it succeeded.
Furthermore, it might leak resources.
|
|
hwdb: DPI info for Logitech G402 mouse
|
|
DPI information was taken from the device's setup guide.
Additional (shortened) information from udevadm info:
P: .../usb2/2-1/2-1:1.0/0003:046D:C07E.0002/input/input6/event2
N: input/event2
S: input/by-id/usb-Logitech_Gaming_Mouse_G402_6D93117D5049-event-mouse
S: input/by-path/pci-0000:00:12.0-usb-0:1:1.0-event-mouse
...
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Gaming_Mouse_G402
E: ID_MODEL_ENC=Gaming\x20Mouse\x20G402
E: ID_MODEL_ID=c07e
E: ID_PATH=pci-0000:00:12.0-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_12_0-usb-0_1_1_0
E: ID_REVISION=9002
E: ID_SERIAL=Logitech_Gaming_Mouse_G402_6D93117D5049
E: ID_SERIAL_SHORT=6D93117D5049
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: LIBINPUT_DEVICE_GROUP=3/46d/c07e/111:usb-0000:00:12.0-1
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
...
|
|
Update the location of the bug tracker and mention that pull requests
are preferred.
|
|
|
