summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-02-24architecture: apparently there is LE ppc nowLennart Poettering
2014-02-24NEWS: add note about ifuncLennart Poettering
2014-02-24NEWS: prepare for release of 210Lennart Poettering
2014-02-24smack: rework security labeling for multiple frameworksŁukasz Stelmach
2014-02-24smack: set loaded_policy in smack_setup()Łukasz Stelmach
With loaded_policy set to true mount_setup() relabels /dev properly.
2014-02-24smack: relabel directories and files created by systemdŁukasz Stelmach
Systemd creates directories in /dev. These directories will get the label of systemd, which is the label of the System domain, which is not accessable to everyone. Relabel the directories, files and symlinks created so that they can be generally used. Based on a patch by Casey Schaufler <casey@schaufler-ca.com>.
2014-02-24update TODOLennart Poettering
2014-02-24hostnamed: correct error messageMichal Sekletar
We are not parsing timezone data.
2014-02-24logind: detect whether the system is docked, and if it is inhibit lid switch ↵Lennart Poettering
processing This should make operation nicer with docking stations, but will not cover anything that does not implement SW_DOCK.
2014-02-24update TODOLennart Poettering
2014-02-24units/serial-getty@.service: add [Install] sectionZbigniew Jędrzejewski-Szmek
This makes it easier to manually enable and disable specific gettys, and also mirrors getty@.service. http://lists.freedesktop.org/archives/systemd-devel/2014-February/017329.html
2014-02-24virt: make Virtualization an anonymous enumThomas Hindoe Paaboel Andersen
This makes llvm happy when we assign an error code to the variable.
2014-02-24update TODOLennart Poettering
2014-02-24configure: Do not require xsltproc for installation of man pagesMike Gilbert
The release tarballs ship with pre-generated man pages, so we do not need xsltproc for a typical end-user build. Developers will probably have xsltproc anyway, but if not they will now encounter a build-time failure instead of an error in configure.
2014-02-23systemctl: move next elapse calculation to its own functionDjalal Harouni
2014-02-23dbus-timer: fix bus_timer_vtable to have the correct timesDjalal Harouni
next_elapse_monotonic() should map to the "NextElapseUSecMonotonic" property and next_elapse_realtime() to "NextElapseUSecRealtime" one. This makes "systemctl list-timers" compute and show the correct times. https://bugs.freedesktop.org/show_bug.cgi?id=75272
2014-02-24update TODOLennart Poettering
2014-02-24getty-generator: verify ttys before we make use of themLennart Poettering
The ttyS[0-3] devices are weird. They may be enumerated, but when one actually tries to open and use them they return EIO, because they don't actually exist. Because they may be enumerated they may be specified on the kernel command line as console=. And some people do that as default. As response to that we'll spawn a getty on the tty that will quickly fail, and we retry a couple of time before giving up. That is quite noisy. With this new change we will validate all serial terminals configured with console= on the kernel cmdline before adding gettys on them, and remove the invalid ones. THis should remove the noise later on. This should make Eric Paris happy!
2014-02-24cgroup: certain cgroup attributes are not available in the root cgroup, ↵Lennart Poettering
hence don't bother
2014-02-24core: gc half-created stub unitsLennart Poettering
2014-02-24core: expose root control group on the busLennart Poettering
We expose the control group of the units on the bus, so let's also expose the root control group.
2014-02-24update TODOLennart Poettering
2014-02-24nspawn: make use of the devices cgroup controller by defaultLennart Poettering
2014-02-24cgroup: parse array cgroup properties correctly when they aren't at the end ↵Lennart Poettering
of the message
2014-02-24sd-dhcp-client: respect TP_STATUS_CSUMNOTREADYTom Gundersen
If an UDP packet has not passed through a hardware device, its checksum may not have been computed. This is exposed through the TP_STATUS_CSUMNOTREADY sockopt. When using raw sockets, skip checksum validation when TP_STATUS_CSUMNOTREADY is set. This is necessary for dhcp to work directly over a veth tunnel, e.g. as done in systemd-nspawn.
2014-02-24update TODOLennart Poettering
2014-02-23NEWS: mention 99-default.link and NamePolicyZbigniew Jędrzejewski-Szmek
2014-02-23sd-dhcp-client: fix max size of REQUEST messageTom Gundersen
2014-02-23sd-dhcp: message_init - only set secs in the clientTom Gundersen
2014-02-23sd-dhcp: don't reject packets with the 'wrong' source portTom Gundersen
The RFC does not specify that the packets from the DHCP server must come from the DHCP server port, only that that's where they should be sent. This fixes a problem when running networkd in VirtualBox. Thanks to Sébastien Luttringer for reporting the bug and very patiently testing various fixes.
2014-02-23sd-dhcp: use FIONREAD to get correct size of incoming DHCP packetTom Gundersen
This avoids the problem of broken DHCP servers sending us too big packets that don't fit in our buffer.
2014-02-23journal: downgrade vaccuum message to debug levelLennart Poettering
https://bugzilla.redhat.com/show_bug.cgi?id=1047148
2014-02-23man: document that per-interface sysctl variables are applied as network ↵Lennart Poettering
interfaces show up https://bugzilla.redhat.com/show_bug.cgi?id=1062955
2014-02-23sd-dhcp: equally verify udp and raw dhcp messagesTom Gundersen
Also be more explicit about why packages are ignored.
2014-02-23update TODOLennart Poettering
2014-02-23core: clean up some confusing regarding SI decimal and IEC binary suffixes ↵Lennart Poettering
for sizes According to Wikipedia it is customary to specify hardware metrics and transfer speeds to the basis 1000 (SI decimal), while software metrics and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary). So far we specified everything in IEC, let's fix that and be more true to what's otherwise customary. Since we don't want to parse "Mi" instead of "M" we document each time what the context used is.
2014-02-22docs: add new gudev functions to documentationZbigniew Jędrzejewski-Szmek
2014-02-23src/shared/ cannot reference symbols from librariesKay Sievers
../src/shared/unit-name.c:462: error: undefined reference to 'sd_bus_label_escape' ../src/shared/unit-name.c:477: error: undefined reference to 'sd_bus_label_unescape' collect2: error: ld returned 1 exit status
2014-02-23sd-dhcp: be more detailed about invalid headersTom Gundersen
This may be a common problem, so let's make it simpler to debug, at least for now.
2014-02-23build-sys: remove libsystemd.sym duplicateDavid Herrmann
sd_memfd_new is available twice. Remove the second one.
2014-02-22build-sys: fix libsystemd --enable-kdbus symbol exportKay Sievers
2014-02-22build-sys: build compat libs from sources, avoiding the not generally ↵Kay Sievers
available ifunc wrapping
2014-02-22networkd: handle SIGINT and SIGTERMTom Gundersen
2014-02-22test: always use assert_se in testsTom Gundersen
2014-02-22sd-dhcp: add very basic debug loggingTom Gundersen
2014-02-22build-sys: add seccomp includes where neededKay Sievers
2014-02-22gudev: add device::get_sysfs_attr_keys and device::has_sysfs_attrAndreas Fuchs
For gudev -> gudevdevice: - Add support for get_sysfs_attr_keys() - Add support for has_sysfs_attr()
2014-02-22udev: net - allow MTU and Speed to be specified with unitsTom Gundersen
This also changes the names to MTUBytes and BitsPerSecond, respectively. Notice that the speed was mistakenly documented to be in bytes before this change.
2014-02-22networkd/nspawn: enable dhcp client on veth device created in guestTom Gundersen
When starting systemd-nspawn with --network-veth, we create a veth device called host0 in the guest. Pick up on this and start a dhcp client on it. We will also pick up host0 netdevs created by other containers should they chose to use the same name.
2014-02-22build-sys: create /var/log/journal/ in journald sectionKay Sievers