summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-04-26libudev: prefix log macros with 'udev_'Kay Sievers
2012-04-26update TODOKay Sievers
2012-04-26udev: use only oom_score_adj interfaceKay Sievers
2012-04-26udev: docs - it's 'GUdev'Kay Sievers
2012-04-25core: add NOP jobs, job type collapsingMichal Schmidt
Two of our current job types are special: JOB_TRY_RESTART, JOB_RELOAD_OR_START. They differ from other job types by being sensitive to the unit active state. They perform some action when the unit is active and some other action otherwise. This raises a question: when exactly should the unit state be checked to make the decision? Currently the unit state is checked when the job becomes runnable. It's more sensible to check the state immediately when the job is added by the user. When the user types "systemctl try-restart foo.service", he really intends to restart the service if it's running right now. If it isn't running right now, the restart is pointless. Consider the example (from Bugzilla[1]): sleep.service takes some time to start. hello.service has After=sleep.service. Both services get started. Two jobs will appear: hello.service/start waiting sleep.service/start running Then someone runs "systemctl try-restart hello.service". Currently the try-restart operation will block and wait for sleep.service/start to complete. The correct result is to complete the try-restart operation immediately with success, because hello.service is not running. The two original jobs must not be disturbed by this. To fix this we introduce two new concepts: - a new job type: JOB_NOP A JOB_NOP job does not do anything to the unit. It does not pull in any dependencies. It is always immediately runnable. When installed to a unit, it sits in a special slot (u->nop_job) where it never conflicts with the installed job (u->job) of a different type. It never merges with jobs of other types, but it can merge into an already installed JOB_NOP job. - "collapsing" of job types When a job of one of the two special types is added, the state of the unit is checked immediately and the job type changes: JOB_TRY_RESTART -> JOB_RESTART or JOB_NOP JOB_RELOAD_OR_START -> JOB_RELOAD or JOB_START Should a job type JOB_RELOAD_OR_START appear later during job merging, it collapses immediately afterwards. Collapsing actually makes some things simpler, because there are now fewer job types that are allowed in the transaction. [1] Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=753586
2012-04-25timedated: introduce systemd-timedated-ntp.target which is controlled by ↵Lennart Poettering
timedated's NTP setting We shouldn't hardcode the name of the NTP implementation in the timedated mechanism, especially since Fedora currently switched from NTP to chrony. This patch introduces a new target that is enabled/disabled instead of the actual NTP implementation. The various NTP implementations should then add .wants/ symlinks to their services and BindTo back to the target, so that their implementations are started/stopped jointly with the target. https://bugzilla.redhat.com/show_bug.cgi?id=815748
2012-04-25nspawn: add --read-only switchLennart Poettering
2012-04-25nspawn: bind mount /etc/resolv.conf from the host by defaultLennart Poettering
2012-04-24shutdown: don't complain if we cannot lock memory, to make container ↵Lennart Poettering
shutdowns clean
2012-04-24remount: consolidate remount-api-vfs and remount-rootfs into oneLennart Poettering
This has the advantage of removing a confusing warning by mount if the root directory is not listed in fstab.
2012-04-24update TODOLennart Poettering
2012-04-24service: introduce Type=idle and use it for gettysLennart Poettering
Type=idle is much like Type=simple, however between the fork() and the exec() in the child we wait until PID 1 informs us that no jobs are left. This is mostly a cosmetic fix to make gettys appear only after all boot output is finished and complete. Note that this does not impact the normal job logic as we do not delay the completion of any jobs. We just delay the invocation of the actual binary, and only for services that otherwise would be of Type=simple.
2012-04-24manager: drop MountAuto= and SwapAuto= optionsLennart Poettering
The ability to set MountAuto=no and SwapAuto=no was useful during the adoption phase of systemd, so that distributions could stick to their classic mount scripts a bit longer. It is about time to get rid of it now.
2012-04-24man: rework nspawn man page to suggest yum --installroot instead of mockLennart Poettering
2012-04-24readahead: rather than checking for virtualization in the C code, use ↵Lennart Poettering
ConditionVirtualization= in the unit
2012-04-23transaction: cancel jobs non-recursively on isolateMichal Schmidt
Recursive cancellation of jobs would trigger OnFailure actions of dependent jobs. This is not desirable when isolating. Fixes https://bugzilla.redhat.com/show_bug.cgi?id=798328
2012-04-24job: serialize jobs properlyMichal Schmidt
Jobs were not preserved correctly over a daemon-reload operation. A systemctl process waiting for a job completion received a job removal signal. The job itself changed its id. The job timeout started ticking all over again. This fixes the deficiencies.
2012-04-24transaction: abort does not need to use recursive deletionMichal Schmidt
Recursion is unnecessary, because we're deleting all transaction jobs anyway. And the recursive deletion produces debug messages that are pointless in transaction abort.
2012-04-24transaction: fix detection of cycles involving installed jobsMichal Schmidt
A transaction can be acyclic, but when it's added to installed jobs, a cycle may result. transaction_verify_order_one() attempts to detect these cases, but it fails because the installed jobs often have the exact generation number that makes them look as if they were walked already. Fix it by resetting the generation numbers of all installed jobs before detecting cycles. An alternative fix could be to add the generation counter to the Manager and use it instead of starting always from 1 in transaction_activate(). But I prefer not having to worry about it wrapping around.
2012-04-24transaction: improve readabilityMichal Schmidt
The functions looked complicated with the nested loops with breaks, continues, and "while (again)". Here using goto actually makes them easier to understand. Also correcting the comment about redundant jobs.
2012-04-22shutdown: don't try to shut down DM devices in a containerLennart Poettering
2012-04-22hostname: if there's already a hostname set when PID 1 is invoked, don't ↵Lennart Poettering
complain
2012-04-22job: the status messages are proper sentences, hence end them with a full stopLennart Poettering
2012-04-22units: remount file systems only if /etc/fstab actually existsLennart Poettering
2012-04-22mount: don't fail if fstab doesn't existLennart Poettering
2012-04-22transaction: downgrade warnings about masked unitsLennart Poettering
2012-04-22transaction: add missing emacs and license headersLennart Poettering
2012-04-22machine-id: fix spellingLennart Poettering
2012-04-22util: unify getenv() logic for other PIDLennart Poettering
2012-04-22nspawn: add --uuid= switch to allow setting the machine id for the containerLennart Poettering
2012-04-22units: don't try to load kernel modules if CAP_SYS_MODULE is missingLennart Poettering
2012-04-22units: skip root fsck if the root directory is writableLennart Poettering
2012-04-22nspawn: add -b switch to automatically look for an init binaryLennart Poettering
2012-04-22default to v102 everywhere, instead of vt100, to synchronize with agettyLennart Poettering
2012-04-22login: assing /dev/console logins to seat0Lennart Poettering
2012-04-22container: spawn a getty instead of a sulogin in a containerLennart Poettering
2012-04-22loginctl: avoid segfault for kill-session and kill-user commandsLennart Poettering
As reported by Mantas Mikulėnas. http://lists.freedesktop.org/archives/systemd-devel/2012-April/004993.html
2012-04-22util: fix tty_is_vc_resolve() in a container where ↵Lennart Poettering
/sys/class/tty/console/active is misleading
2012-04-22log: include syslog identifier in default log properties, to avoid comm ↵Lennart Poettering
truncation
2012-04-22nspawn: be more careful when initializing the hostname from the directory nameLennart Poettering
2012-04-22mount-setup: ignore common container bind mountsLennart Poettering
2012-04-22update TODOLennart Poettering
2012-04-22nspawn: make /dev/kmsg unavailable in the container, but allow access to ↵Lennart Poettering
/proc/kmsg
2012-04-21watchdog: fix default configuration fragment for watchdogLennart Poettering
2012-04-21man: doc-sync - properly delete no longer existing stuff on remote serverKay Sievers
2012-04-20transaction: add starting requirements for JOB_RESTARTMichal Schmidt
While having a Requires= dependency between units, the dependency is started automatically on "systemctl start", but it's not started on "systemctl restart". JOB_RESTART jobs did not pull the dependencies for starting into the transaction. https://bugzilla.redhat.com/show_bug.cgi?id=802770 Note that the other bug noted in comment #2 has been fixed already by avoiding the deletion of anchor jobs.
2012-04-20dbus-job: allow multiple bus clientsMichal Schmidt
Merging of jobs can result in more than one client being interested in a job.
2012-04-20transaction: remove checks for installedMichal Schmidt
Transactions cannot contain installed jobs anymore. Remove the now pointless checks.
2012-04-20transaction: rework merging with installed jobsMichal Schmidt
Previously transactions could reference installed jobs. It made some issues difficult to fix. This sets new rules for jobs: A job cannot be both a member of a transaction and installed. When jobs are created, they are linked to a transaction. The whole transaction is constructed (with merging of jobs within, etc.). When it's complete, all the jobs are unlinked from it one by one and let to install themselves. It is during the installation when merging with previously installed jobs (from older transactions) is contemplated. Merging with installed jobs has different rules than merging within a transaction: - An installed conflicting job gets cancelled. It cannot be simply deleted, because someone might be waiting for its completion on DBus. - An installed, but still waiting, job can be safely merged into. - An installed and running job can be tricky. For some job types it is safe to just merge. For the other types we merge anyway, but put the job back into JOB_WAITING to allow it to run again. This may be suboptimal, but it is not currently possible to have more than one installed job for a unit. Note this also fixes a bug where the anchor job could be deleted during merging within the transaction.
2012-04-20job: separate job_install()Michal Schmidt
Let the jobs install themselves.
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-08 19:55:09 +0000