summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-05-03man: add a description of DUIDType and DUIDRawDataZbigniew Jędrzejewski-Szmek
This is essentially a revert of f38e0cce75ff2ffbd99f7e382ed39c160bb7d799 (which removed the documentation of DUIDType on purpose). The description is heavily updated for the new semantics. This addresses #3127 § 4.
2016-05-03man: s/similar/similarly/Zbigniew Jędrzejewski-Szmek
2016-05-03test-networkd-conf: add tests for the parsing functionsZbigniew Jędrzejewski-Szmek
2016-05-03networkd: rework duid_{type,duid_type,duid,duid_len} settingZbigniew Jędrzejewski-Szmek
Separate fields are replaced with a struct. Second second duid type field is removed. The first field was used to carry the result of DUIDType= configuration, and the second was either a copy of this, or contained the type extracted from DuidRawData. The semantics are changed so that the type specified in DUIDType is always used. DUIDRawData= no longer overrides the type setting. The networkd code is now more constrained than the sd-dhcp code: DUIDRawData cannot have 0 length, length 0 is treated the same as unsetting. Likewise, it is not possible to set a DUIDType=0. If it ever becomes necessary to set type=0 or a zero-length duid, the code can be changed to support that. Nevertheless, I think that's unlikely. This addresses #3127 § 1 and 3. v2: - rename DUID.duid, DUID.duid_len to DUID.raw_data, DUID.raw_data_len
2016-05-03dh-dhcp{,6}-client: change the semantics of DUID settingZbigniew Jędrzejewski-Szmek
Both versions of the code are changed to allow the caller to override DUID using simple rules: duid type and value may be specified, in which case the caller is responsible to providing the contents, or just duid type may be specified as DUID_TYPE_EN, in which case we we fill in the values. In the future more support for other types may be added, e.g. DUID_TYPE_LLT. There still remains and ugly discrepancy between dhcp4 and dhcp6 code: dhcp6 has sd_dhcp6_client_set_duid and sd_dhcp6_client_set_iaid and requires client->state to be DHCP6_STATE_STOPPED, while dhcp4 has sd_dhcp_client_set_iaid_duid and will reconfigure the client if it is not stopped. This commit doesn't touch that part. This addresses #3127 § 2.
2016-05-03dhcp-identifier: un-inline dhcp_validate_duid_lenZbigniew Jędrzejewski-Szmek
After all it is used in more than one place and is not that short. Also tweak the test a bit: - do not check that duid_len > 0, because we want to allow unknown duid types, and there might be some which are fine with 0 length data, (also assert should not be called from library code), - always check that duid_len <= MAX_DUID_LEN, because we could overwrite available buffer space otherwise.
2016-05-03sd-dhcp: change uint8_t *duid to const void*Zbigniew Jędrzejewski-Szmek
2016-05-03sd-dhcp{,6}-client: use standard indentation for functions argsZbigniew Jędrzejewski-Szmek
2016-04-29networkd: rework headers to avoid circular includesZbigniew Jędrzejewski-Szmek
Header files were organized in a way where the includer would add various typedefs used by the includee before including it, resulting in a tangled web of dependencies between files. Replace this with the following logic: networkd.h / \ networkd-link.h \ networkd-ipv4ll.h--\__\ networkd-fdb.h \ networkd-network.h netword-netdev-*.h networkd-route.h \ networkd-netdev.h If a pointer to a structure defined in a different header file is needed, use a typedef line instead of including the whole header.
2016-04-29Merge pull request #3151 from keszybz/pr3149-2Zbigniew Jędrzejewski-Szmek
Assorted fixes #3149 + one commit tacked on top
2016-04-29Merge pull request #3148 from poettering/triggerZbigniew Jędrzejewski-Szmek
core: introduce activation rate limit and parse nice levels and close sockets properly
2016-04-29update TODOLennart Poettering
2016-04-29core: merge service_connection_unref() into service_close_socket_fd()Lennart Poettering
We always call one after the other anyway, and this way service_set_socket_fd() and service_close_socket_fd() nicely match each other as one undoes the effect of the other.
2016-04-29core: rerun GC logic for a unit that loses a referenceLennart Poettering
Let's make sure when we drop a reference to a unit, that we run the GC queue on it again. This (together with the previous commit) should deal with the GC issues pointed out in: https://github.com/systemd/systemd/pull/2993#issuecomment-215331189
2016-04-29core: rework socket/service GC logicLennart Poettering
There's no need to set the no_gc bit for service units that socket units prepare, as we always keep a proper reference (as maintained by unit_ref_set()) on them, and such references are honoured by the GC logic anyway. Moreover, explicitly setting the no_gc bit is problematic if the socket gets GC'ed for a reason, as the service might then leak with the bit set.
2016-04-29hwdb: add missing newline so the hwdb buils correctly againLennart Poettering
2016-04-29socket: really always close auxiliary fds when closing socket fdsLennart Poettering
2016-04-29core: make parsing of RLIMIT_NICE aware of actual nice levelsLennart Poettering
2016-04-29core: make sure to close connection fd when we fail to activate a ↵Lennart Poettering
per-connection service Fixes: #2993 #2691
2016-04-29core: minor error path fixLennart Poettering
In service_set_socket_fd(), let's make sure that if we can't add the requested dependencies we take no possession of the passed connection fd. This way, we follow the strict rule: we take possession of the passed fd on success, but on failure we don't, and the fd remains in possession of the caller.
2016-04-29core: rename StartLimitInterval= to StartLimitIntervalSec=Lennart Poettering
We generally follow the rule that for time settings we suffix the setting name with "Sec" to indicate the default unit if none is specified. The only exception was the rate limiting interval settings. Fix this, and keep the old names for compatibility. Do the same for journald's RateLimitInterval= setting
2016-04-29core: move start ratelimiting check after condition checksLennart Poettering
With #2564 unit start rate limiting was moved from after the condition checks are to before they are made, in an attempt to fix #2467. This however resulted in #2684. However, with a previous commit a concept of per socket unit trigger rate limiting has been added, to fix #2467 more comprehensively, hence the start limit can be moved after the condition checks again, thus fixing #2684. Fixes: #2684
2016-04-29core: introduce activation rate limiting for socket unitsLennart Poettering
This adds two new settings TriggerLimitIntervalSec= and TriggerLimitBurst= that define a rate limit for activation of socket units. When the limit is hit, the socket is is put into a failure mode. This is an alternative fix for #2467, since the original fix resulted in issue #2684. In a later commit the StartLimitInterval=/StartLimitBurst= rate limiter will be changed to be applied after any start conditions checks are made. This way, there are two separate rate limiters enforced: one at triggering time, before any jobs are queued with this patch, as well as the start limit that is moved again to be run immediately before the unit is activated. Condition checks are done in between the two, and thus no longer affect the start limit.
2016-04-29build-sys: improve compat with older kernel headersLennart Poettering
In 4.2 kernel headers, some netlink defines are missing that we need. missing.h already can add them in, but currently makes this dependent on a definition that these kernels already have. Change the check hence to check for the newest definition in the table, so that the whole bunch of definitions as added in on all kernels lacking this.
2016-04-29path-util: also support ".old" and ".new" suffixes and recommend themZbigniew Jędrzejewski-Szmek
~ suffix works fine, but looks to much like it the file is supposed to be automatically cleaned up. For new versions of configuration files installers might want to using something that looks more permanent like foobar.new. So let's add treat ".old" and ".new" as special. Update test to match.
2016-04-29core: Filter by unit name behind the D-Bus, instead on the client side (#3142)kayrus
This commit improves systemd performance on the systems which have thousands of units.
2016-04-29Merge pull request #3126 from poettering/small-fixesZbigniew Jędrzejewski-Szmek
fsync directory when creating or rotating journal files and other small fixes, most importantly for the DHCP DUID code.
2016-04-29test-copy: never call alloca() in a loopLennart Poettering
That's a total no-no, hence rework this to use malloc()-based memory instead of alloca()-based memory. Also see CODING_STYLE about this.
2016-04-29copy: also copy AF_UNIX socketsLennart Poettering
We previously would fail with EOPNOTSUPP when encountering an AF_UNIX socket in the directory tree to copy. Fix that, and copy them too (even if they are dead in the result). Fixes: #2914
2016-04-29man: document that RemainAfterExit= doesn't make much sense for repetitive ↵Lennart Poettering
timers Fixes #3122
2016-04-29path-util: document that we shouldn't add further entries to ↵Lennart Poettering
hidden_or_backup_file() And let's add ".bak" as a generic suffix for backups, that people can use without having to register their stuff in our list.
2016-04-29rules: add NVMe rules (#3136)Ming Lin
Add NVMe rules using the "wwid" attribute. root@target:~# cat /sys/block/nvme0n1/wwid eui.3825004235000591 root@target:~# ls /dev/disk/by-id/ -l |grep nvme lrwxrwxrwx 1 root root 13 Apr 27 16:08 nvme-eui.3825004235000591 -> ../../nvme0n1 lrwxrwxrwx 1 root root 15 Apr 27 16:08 nvme-eui.3825004235000591-part1 -> ../../nvme0n1p1 lrwxrwxrwx 1 root root 15 Apr 27 16:08 nvme-eui.3825004235000591-part2 -> ../../nvme0n1p2
2016-04-29Merge pull request #3069 from Werkov/fix-dependencies-for-bind-mountsLennart Poettering
Always create dependencies for bind mounts
2016-04-29journal-file: when rotating a journal file, fsync directory tooLennart Poettering
As suggested by: https://github.com/systemd/systemd/pull/3126#discussion_r61125474
2016-04-29networkd: clean up DUID code a bitLennart Poettering
Let's move DUID configuration into the [DHCP] section, since it only makes sense in a DHCP context, and should be close to the configuration of ClientIdentifier= and suchlike. This really shouldn't be a section of its own, we don't have any for any of our other per-protocol specific identifiers... Follow-up for #2890 #2943
2016-04-29journal: when creating a new journal file, fsync() the directory it is ↵Lennart Poettering
created in too Fixes: #2831
2016-04-29update TODO a bitLennart Poettering
2016-04-29man: minor wording fixesLennart Poettering
As suggested in: https://github.com/systemd/systemd/pull/3124#discussion_r61068789
2016-04-29vimrc: fix indentation logic for our docbook xml filesLennart Poettering
Make sure TAB results in 2ch indenting as we commonly use for our docbook XML files.
2016-04-29parse-util: fix conversion from size_t on s390 (#3147)Lubomir Rintel
On s390 size_t is an unsigned long, nor an unsigned int. They both are of the same size and can be cast to each other safely, but the compiler still seems unhappy about incompatible pointers. Fixes: 7c2da2ca8
2016-04-29Merge pull request #3137 from keszybz/dirent-simplificationLennart Poettering
Various small cleanups in shared code
2016-04-29nspawn: convert uuid to string (#3146)Evgeny Vereshchagin
Fixes: cp /etc/machine-id /var/tmp/systemd-test.HccKPa/nspawn-root/etc systemd-nspawn -D /var/tmp/systemd-test.HccKPa/nspawn-root --link-journal host -b ... Host and machine ids are equal (P�S!V): refusing to link journals
2016-04-28networkd: reconfigure IPv6 and static address after link up event (#3105)Susant Sahani
Now we are not setting static address, start dhcp6 client and discovering IPv6 routers after link gained carrier. This fixes #2912.
2016-04-28basic/mount-util: recognize pvfs2 as network fs (#3140)Zbigniew Jędrzejewski-Szmek
Added to kernel 4.6.
2016-04-28nspawn: initialize the veth_name (#3141)Evgeny Vereshchagin
Fixes: $ systemd-nspawn -h ... Failed to remove veth interface ����: Operation not permitted This is a follow-up for d2773e59de3dd970d861
2016-04-28cgtop: initialize `ours' to NULL properly (#3139)Naohiro Aota
Running cgtop on a system, which lacks expecting stat file, results in a segfault. For example, a system with blkio tree but without cfq io scheduler, lacks "blkio.io_service_bytes". When the targeting cgroup's file does not exist, process() returns 0 and also does not modify `*ret' value (which is `*ours'). As a result, callers of refresh_one() can have bogus pointer, which result in SEGV. This patch just properly initialize the variable to NULL.
2016-04-28test: chmod +x sysv-generator-testZbigniew Jędrzejewski-Szmek
Just for convenience.
2016-04-28test-path-util: add a trivial test for hidden_or_backup_fileZbigniew Jędrzejewski-Szmek
2016-04-28tree-wide: rename hidden_file to hidden_or_backup_file and optimizeZbigniew Jędrzejewski-Szmek
In standard linux parlance, "hidden" usually means that the file name starts with ".", and nothing else. Rename the function to convey what the function does better to casual readers. Stop exposing hidden_file_allow_backup which is rather ugly and rewrite hidden_file to extract the suffix first. Note that hidden_file_allow_backup excluded files with "~" at the end, which is quite confusing. Let's get rid of it before it gets used in the wrong place.
2016-04-27Add croatian translation, hr.po and systemd.hr.catalog filesmuzena