| Age | Commit message (Collapse) | Author |
|---|
|
|
|
With Symlinks= we can manage one or more symlinks to AF_UNIX or FIFO
nodes in the file system, with the same lifecycle as the socket itself.
This has two benefits: first, this allows us to remove /dev/log and
/dev/initctl from /dev, thus leaving only symlinks, device nodes and
directories in the /dev tree. More importantly however, this allows us
to move /dev/log out of /dev, while still making it accessible there, so
that PrivateDevices= can provide /dev/log too.
|
|
The kernel will return 0 for REREADPT when no partition table
is found, we have to send out "change" ourselves.
|
|
|
|
mounted partitions:
# dd if=/dev/zero of=/dev/sda bs=1 count=1
UDEV [4157.369250] change .../0:0:0:0/block/sda (block)
UDEV [4157.375059] change .../0:0:0:0/block/sda/sda1 (block)
UDEV [4157.397088] change .../0:0:0:0/block/sda/sda2 (block)
UDEV [4157.404842] change .../0:0:0:0/block/sda/sda4 (block)
unmounted partitions:
# dd if=/dev/zero of=/dev/sdb bs=1 count=1
UDEV [4163.450217] remove .../target6:0:0/6:0:0:0/block/sdb/sdb1 (block)
UDEV [4163.593167] change .../target6:0:0/6:0:0:0/block/sdb (block)
UDEV [4163.713982] add .../target6:0:0/6:0:0:0/block/sdb/sdb1 (block)
|
|
|
|
Reported by Kay.
|
|
This should make sure that fdisk-like programs will automatically
cause an update of all partitions, just like mkfs-like programs cause
an update of the partition.
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=79576#c5
|
|
|
|
Either become uid/gid of the client we have been forked for, or become
the "systemd-bus-proxy" user if the client was root. We retain
CAP_IPC_OWNER so that we can tell kdbus we are actually our own client.
|
|
logind needs access to /run/user/, udevd fails during early boot
with these settings
|
|
ReadOnlySystem= uses fs namespaces to mount /usr and /boot read-only for
a service.
ProtectedHome= uses fs namespaces to mount /home and /run/user
inaccessible or read-only for a service.
This patch also enables these settings for all our long-running services.
Together they should be good building block for a minimal service
sandbox, removing the ability for services to modify the operating
system or access the user's private data.
|
|
Configuration will be in
root:root /run/systemd/network
and state will be in
systemd-network:systemd-network /run/systemd/netif
This matches what we do for logind's seat/session state.
|
|
|
|
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=79576
|
|
On systems which cannot receive unicast packets until its IP stack has been configured
we need to request broadcast packets. We are currently not able to reliably detect when
this is necessary, so set it unconditionally for now.
This is set on all packets, but the DHCP server will only broadcast the packets that are
necessary, and unicast the rest.
For more information please refer to this thread in CoreOS: https://github.com/coreos/bugs/issues/12
[tomegun: rephrased commit message]
|
|
This service is not yet network facing, but let's prepare nonetheless.
Currently all caps are dropped, but some may need to be kept in the
future.
|
|
Reported by Samuli Suominen.
|
|
Rely on modules being built-in or autoloaded on-demand.
As networkd is a network facing service, we want to limits its capabilities,
as much as possible. Also, we may not have CAP_SYS_MODULE in a container,
and we want networkd to work the same there.
Module autoloading does not always work, but should be fixed by the kernel
patch f98f89a0104454f35a: 'net: tunnels - enable module autoloading', which
is currently in net-next and which people may consider backporting if they
want tunneling support without compiling in the modules.
Early adopters may also use a module-load.d snippet and order
systemd-modules-load.service before networkd to force the module
loading of tunneling modules.
This sholud fix the various build issues people have reported.
|
|
This patch enables vti tunnel support.
example conf:
file : vti.netdev
[NetDev]
Name=vti-tun
Kind=vti
MTUBytes=1480
[Tunnel]
Local=X.X.X.X
Remote=X.X.X.X
file: vti.network
[Match]
Name=em1
[Network]
Tunnel=vti-tun
TODO:
Add more attributes for vti tunnel
IFLA_VTI_IKEY
IFLA_VTI_OKEY
|
|
This patch adds path of mtu discovery for sit tunnel.
To enable/disable DiscoverPathMTU is introduced.
Example configuration
file: sit.netdev
[NetDev]
Name=sit-tun
Kind=sit
MTUBytes=1480
[Tunnel]
DiscoverPathMTU=1
Local=X.X.X.X
Remote=X.X.X.X
By default pmtudisc is turned on , if DiscoverPathMTU
is missing from the config. To turn it off
DiscoverPathMTU=0 needs to be set.
|
|
This patch enables gre tunnel support.
example conf:
file : gre.netdev
[NetDev]
Name=gre-tun
Kind=gre
MTUBytes=1480
[Tunnel]
Local=X.X.X.X
Remote=X.X.X.X
file: gre.network
[Match]
Name=em1
[Network]
Tunnel=gre-tun
TODO:
Add more attributes for gre tunnel
IFLA_GRE_IFLAGS
IFLA_GRE_IFLAGS
IFLA_GRE_IKEY
IFLA_GRE_OKEY
|
|
|
|
This patch adds veth device support to networkd.
Example conf:
File: veth.netdev
[NetDev]
Name=veth-test
Kind=veth
[Peer]
Name=veth-peer
|
|
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=79495
|
|
|
|
This allows us to run networkd mostly unpriviliged with the exception of
CAP_NET_* and CAP_SYS_MODULE. I'd really like to get rid of the latter
though...
|
|
The ptrace capability was only necessary to detect virtualizations
environments. Since we changed the logic to determine this to not
require priviliges, there's no need to carry the CAP_SYS_PTRACE
capability anymore.
|
|
make use of it from other daemons too
This is preparation to make networkd work as unpriviliged user.
|
|
|
|
I am getting
"Error calling EVIOCSKEYCODE (scan code 0xc022d, key code 418): Invalid
argument", the error message does not tell on which specific device the
problem is, add that info.
|
|
ignore_file currently allows any file ending with '~' while it
seems that the opposite was intended:
a228a22fda4faa9ecb7c5a5e499980c8ae5d2a08
|
|
This causes the container to shut down cleanly when the service is
stopped.
|
|
|
|
Instead of accessing /proc/1/environ directly, trying to read the
$container variable from it, let's make PID 1 save the contents of that
variable to /run/systemd/container. This allows us to detect containers
without the need for CAP_SYS_PTRACE, which allows us to drop it from a
number of daemons and from the file capabilities of systemd-detect-virt.
Also, don't consider chroot a container technology anymore. After all,
we don't consider file system namespaces container technology anymore,
and hence chroot() should be considered a container even less.
|
|
|
|
|
|
|
|
It is almost always incorrect to allow DHCP or other sources of
transient host names to override an explicitly configured static host
name.
This commit changes things so that if a static host name is set, this
will override the transient host name (eg: provided via DHCP). Transient
host names can still be used to provide host names for machines that have
not been explicitly configured with a static host name.
The exception to this rule is if the static host name is set to
"localhost". In those cases we act as if no
static host name has been explicitly set.
As discussed elsewhere, systemd may want to have an fd based ownership
of the transient name. That part is not included in this commit.
|
|
|
|
|
|
Both systemd-analyze and systemd-run only access org.freedesktop.systemd1
on the bus. This patch allows using systemd-run --user and systemd-analyze
--user even if the user session's bus is not properly integrated with the
systemd user unit.
https://bugs.freedesktop.org/show_bug.cgi?id=79252 and other reports...
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=49316
|
|
Re-apply the keymaps when "udevadm trigger" is called. Hooking into
"add" only would just remove all keymap content from the udev database
instead of applying the new config.
|
