summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-11-18Remove duplicate includesKarel Zak
2013-11-18use #pragma once instead of foo*foo define guardsShawn Landden
2013-11-18remove unused variablesThomas Hindoe Paaboel Andersen
2013-11-18bus: TIMESTAMP is optional kdbus metadata now, NAMES are always addedKay Sievers
2013-11-17core/socket: fix SO_REUSEPORTShawn Landden
2013-11-17core/socket: use _cleanup_free_Shawn Landden
2013-11-17networkd: make all calls asyncTom Gundersen
2013-11-17networkd: store netmask and mac address explicitlyTom Gundersen
2013-11-17bus: CREDS and NAMES are optional kdbus metadata nowKay Sievers
2013-11-17catalog: add French translationSylvain Plantefeve
2013-11-16tmpfiles: adjust excludes for the new per-service private dirsZbigniew Jędrzejewski-Szmek
In d8c9d3a (systemd: use unit name in PrivateTmp directories) I forgot to update the tmpfiles config.
2013-11-16Fix RemainAfterExit services keeping a hold on consoleOlivier Brunel
When a service exits succesfully and has RemainAfterExit set, its hold on the console (in m->n_on_console) wasn't released since the unit state didn't change.
2013-11-16po: add French translationSylvain Plantefeve
2013-11-15bash-completion: journalctl --fileZbigniew Jędrzejewski-Szmek
2013-11-15random-seed: improve debugging messages a bitZbigniew Jędrzejewski-Szmek
2013-11-15fstab-generator: use RequiresOverridable for fsck unitsZbigniew Jędrzejewski-Szmek
This allows the user to disable fsck's by masking. If fsck fails, emergency target is started, the user might mount the unit using mount and disable fsck by masking the unit. In this case, .mount will be active because the mount is detect through /proc/self/mountinfo, but systemd-fsck@.service will still be in failed mode. This results in a funny situation where $ systemctl show -p ActiveState local-fs.target yyy.mount ActiveState=active ActiveState=active $ sudo systemctl start local-fs.target [sudo] password for test: Failed to start local-fs.target: Unit systemd-fsck@xxx.service is masked.
2013-11-15core: some more _cleanup_free_Zbigniew Jędrzejewski-Szmek
2013-11-15fsck,fstab-generator: be lenient about missing fsck.<type>Zbigniew Jędrzejewski-Szmek
If fstab contains 1 for passno, treat this as an error, but only warn briefly. If fstab doesn't contain this information, don't complain at all. Patch is complicated a bit by the fact that we might have the fstype specified in fstab or on /proc/cmdline, in which case we can check if we have the appropriate fsck tool, or not specified, or specified as auto, in which case we have to look and check the type of the filesystem ourselves. It cannot be done before the device appears, so it is too early in the generator phase, and it must be done directly in fsck service.
2013-11-15fsck: modernizationZbigniew Jędrzejewski-Szmek
2013-11-15ycm_extra_conf: include src/systemd for headersDave Reisner
2013-11-15build: use printf to generate symbol testsDave Reisner
echo is basically unportable, so use printf instead.
2013-11-15build-sys: don't mix dynamic and static libsTom Gundersen
2013-11-14rtnl: add event loop integrationTom Gundersen
2013-11-14bus: typoTom Gundersen
Fix a couple of 'void' that should have been 'sd_bus'.
2013-11-14loopback-setup: move to rtnlTom Gundersen
This should be equivalent to the old behavior.
2013-11-14rtnl: add call_async and call_async_cancelTom Gundersen
They work in the same way as the sd-bus equivalents.
2013-11-14Update TODOZbigniew Jędrzejewski-Szmek
2013-11-13Fix possible lack of status messages on shutdown/rebootOlivier Brunel
Since 31a7eb86 the output on console can be disabled to avoid colliding with gettys. However, it could also lead to a lack of messages during shutdown/reboot.
2013-11-13Only disable output on console during boot if neededOlivier Brunel
If there are no more jobs on console, no need/we shouldn't disable output.
2013-11-13Resolve /dev/console to the active tty instead of just "tty0"Olivier Brunel
When resolving /dev/console one would often get "tty0" meaning the active VT. Resolving to the actual tty (e.g. "tty1") will notably help on boot when determining whether or not PID1 can output to the console.
2013-11-13zsh-completion: add bootctlMarko Myllynen
2013-11-13man: add bootctl(8)Marko Myllynen
https://bugzilla.redhat.com/show_bug.cgi?id=1014303
2013-11-13journal: timestamp support on console messagesUmut Tezduyar Lindskog
journald mimics the kernel here: timestamps will be printed if /sys/module/printk/parameters/time contains "Y".
2013-11-13rtnl: start adding support for asynchronous messagingTom Gundersen
Similarly to sd-bus, add: sd_rtnl_wait sd_rtnl_process sd_rtnl_send and adapt sd_rtnl_call accordingly.
2013-11-13rtnl: rename rtnl_bus_send_with_reply_and_block() to rtnl_bus_call()Tom Gundersen
Follow the equivalent rename in sd-bus to stay as similar as possible.
2013-11-13logind: create the session fifo before saving the session fileThomas Hindoe Paaboel Andersen
If the session fifo is not created the session state written to the session file is "closing". This caused the lock screen in gnome-shell to go into a loop trying to find the active session. The problem was introduced in the sd-bus port in cc3773810855956bad92337cee8fa193584ab62e Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=71525
2013-11-14activate: fix crash when -s is passedMantas Mikulėnas
getopt_long() was told to accept -s which was never implemented.
2013-11-14activate: mention -E in the help textMantas Mikulėnas
2013-11-14systemctl: honor --no-legend in 'list-jobs'Mantas Mikulėnas
2013-11-14build: Allow disabling maintainer modeUmut Tezduyar Lindskog
This allows make rules for generated build files (i.e. configure, Makefile.in, ... ) to be skipped. This is useful when the source is stored without timestamps (for example in CVS or GIT). When the build rules trigger to regenerate the build files, it tries to use the same autotools version (currently 1.14) as was originally used for the release. Since many of our build machines run Debian Squeeze, they only have autotools 1.11 available and the build fails. Currently, we have to work around this by touching all the generated files before building to avoid triggering the make rule. With this patch, we would be able to just run configure with --disable-maintainer-mode instead. The patch sets the default to enable to not change the default behavior. Ref: http://git.kernel.org/cgit/utils/kernel/kmod/kmod.git/commit/ ?id=f5cc26c77d2f332a9b40f51f0ec72e95711edf1e
2013-11-13udev: declare some symbols staticKay Sievers
2013-11-13libsystemd-id128: statically include sd_listen_fds()Kay Sievers
2013-11-12build-sys: parallelize 'exported' targetZbigniew Jędrzejewski-Szmek
2013-11-12systemd-python: fix booted() and add two functions to docsZbigniew Jędrzejewski-Szmek
For some reason sphinx doesn't want to show inherited C functions.
2013-11-12build-sys: make public libraries depend on .sym filesZbigniew Jędrzejewski-Szmek
This way modyfing the .sym file causes a rebuild.
2013-11-12build-sys: add a link test for exported symbolsZbigniew Jędrzejewski-Szmek
I know that this is a pretty big net to catch some small fish, but we *do* regularly forget to properly export symbols that were supposed to be exported. This time sd_bus_get_current and some renamed symbols are caught.
2013-11-12build-sys: make networkd man pages conditionalTom Gundersen
2013-11-12build-sys: Add --disable-networkd optionColin Walters
For GNOME (Continuous), we are unlikely to require or want systemd-networkd in the near term future; all of the tools and code are targeting NetworkManager. The long term story is still an open question of course, but for now, there's no reason for gnome-continuous to build or ship this.
2013-11-12uaccess: Add new DRM render nodesKristian Høgsberg
2013-11-12udev: declare some symbols staticKay Sievers
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-09-16 17:42:09 +0000