| Age | Commit message (Collapse) | Author |
|---|
|
Let's clarify that for user services some OS-defined limits bound the settings
in the unit files.
Fixes: #4232
|
|
Fixes: #4116
|
|
also have a unit state of that name
Fixes: #3971
|
|
|
|
variables
Document the default pagers used, as well as $SYSTEMD_LESSCHARSET.
Fixes: #4143
|
|
bash-completion: systemctl: do not pass masked or not-found units to filter
|
|
`systemctl isolate initrd-switch-root.target` called by initrd-cleanup.service
kills initrd-cleanup.service itself. Then, initrd-cleanup.service failed and
system goes to emergency shell.
To prevent this problem, this commit adds `Wants=initrd-cleanup.service` to
initrd-switch-root.target.
fixes: #4343.
|
|
log_error method is used instead of fprintf
|
|
Fix for #4275 and more
|
|
It seems that this count was not updated when snapshot units were
removed in #1841.
|
|
r was not initialized and would be used if "tcp" was the only option
used for the stub. We should initialize it to 0 to indicate that no
error happened in the udp case.
|
|
Journal remote non blocking
|
|
We do the same thing in two branches, let's merge them. Let's also add an
explanatory comment, while we are at it.
|
|
|
|
whether it is a command or a daemon
SIGTERM should be considered a clean exit code for daemons (i.e. long-running
processes, as a daemon without SIGTERM handler may be shut down without issues
via SIGTERM still) while it should not be considered a clean exit code for
commands (i.e. short-running processes).
Let's add two different clean checking modes for this, and use the right one at
the appropriate places.
Fixes: #4275
|
|
When we print information about PID 1's crashdump subprocess failing. In this
case we *know* that we do not generate LSB exit codes, as it's basically PID 1
itself that exited there.
|
|
Previously we've used free_and_strdup() to fill arg_default_unit with unit
name, If we didn't pass default unit name through a kernel command line or
command line arguments. But we can use just strdup() instead of
free_and_strdup() for this, because we will start fill arg_default_unit
only if it wasn't set before.
|
|
Let's get rid of is_clean_exit_lsb(), let's move the logic for the special
handling of the two LSB exit codes into the sysv-generator by writing out
appropriate SuccessExitStatus= lines if the LSB header exists. This is not only
semantically more correct, bug also fixes a bug as the code in service.c that
chose between is_clean_exit_lsb() and is_clean_exit() based this check on
whether a native unit files was available for the unit. However, that check was
bogus since a long time, since the SysV generator was introduced and native
SysV script support was removed from PID 1, as in that case a unit file always
existed.
|
|
The --no-seal and --no-compress options were dropped and replaced with
boolean functionality. This syncs the man page with the code.
|
|
We are going to add this child as a source to our event loop so we don't
want to block when reading data from it as this will prevent us from
processing other events. Specifically this will block the signalfds
which means if we are waiting for data from curl we won't handle SIGTERM
or SIGINT until we happen to get more data.
|
|
|
|
Let's make sure it's in the same order as the actual enum defining the exit
statuses.
|
|
Do not make up our own type for ExitStatus, but use the type used by POSIX for
this, which is "int". In particular as we never used that type outside of the
definition of exit_status_to_string() where we internally cast the paramter to
(int) every single time we used it.
Hence, let's simplify things, drop the type and use the kernel type directly.
|
|
|
|
|
|
nspawn --private-users parsing, v2
|
|
errno (#4328)
as @poettering suggested in the #4320
|
|
Autodetect systemd version in containers started by systemd-nspawn
|
|
In particular, the check for arg_uid_range <= 0 is moved to the end, so that
"foobar:0" gives "Failed to parse UID", and not "UID range cannot be 0.".
|
|
This is like the previous reverted commit, but any boolean is still accepted,
not just "yes" and "no". Man page is adjusted to match the code.
|
|
This reverts commit bfd292ec35c7b768f9fb5cff4d921f3133e62b19.
|
|
It is impossible to ship a fully generic PAM configuration upstream.
Therefore, ship a minimal configuration with the systemd --user requirements,
and add a note to DISTRO_PORTING documenting this.
Fixes #4284
|
|
console-shell.service was supposed to be useful for normal clean boots
(i.e. multi-user.target or so), as a replacement for logind/getty@.service for
simpler use cases.
But due to the lack of documentation and sanity check one can easily be
confused and enable this service in // with getty@.service.
In this case we end up with both services sharing the same tty which ends up in
strange results.
Even worse, console-shell.service might be failing while getty@.service tries
to acquire the terminal which ends up in the system to poweroff since
console-shell.service uses:
"ExecStopPost=-/usr/bin/systemctl poweroff".
Another issue: this service doesn't work well if plymouth is also used since it
lets the splash screen program run and mess the tty (at least a "plymouth quit"
is missing).
So let's kill it for now.
|
|
A fix to get resolved to start in userns
|
|
systemd fills arg_default_unit during startup with default.target
value. But arg_default_unit may be overwritten in parse_argv() or
parse_proc_cmdline_item().
Let's check value of arg_default_unit after calls of parse_argv()
and parse_proc_cmdline_item() and fill it with default.target if
it wasn't filled before. In this way we will not spend unnecessary
time to for filling arg_default_unit with default.target.
|
|
The make_null_stdio() may fail. Let's check its result and print
warning message instead of keeping silence.
|
|
When running in a user namespace without private networking, resolved would
fail to start. There isn't much difference between EADDRINUSE and EPERM,
so treat them the same, except for the warning message text.
|
|
Make sure an error is always printed… When systemd-resolved is started in a
user namespace without private network, it would fail on setsockopt, but the
error wouldn't be particularly informative:
"Failed to start manager: permission denied."
|
|
Nspawn arguments parsing and man page update
|
|
According to TCG EFI Protocol Specification for TPM 2.0 family,
all events generated after the invocation of EFI_TCG2_GET_EVENT_LOG
shall be stored in an instance of an EFI_CONFIGURATION_TABLE aka
EFI TCG 2.0 final events table. Hence, it is necessary to trigger the
internal switch through calling get_event_log() in order to allow
to retrieve the logs from OS runtime.
msekletar:
> I've looked at EDK2 and indeed log entry is added to FinalEventsTable only after
> EFI_TCG2_PROTOCOL.GetEventLog was called[1][2]. Also, same patch was currently
> merged to shim by Peter Jones [3].
[1] https://github.com/tianocore/edk2/blob/master/SecurityPkg/Tcg/Tcg2Dxe/Tcg2Dxe.c#L698
[2] https://github.com/tianocore/edk2/blob/master/SecurityPkg/Tcg/Tcg2Dxe/Tcg2Dxe.c#L824
[3] rhinstaller/shim#64
|
|
Now that systemd-nspawn@.service includes -U, more users might be interested
in this tidbit ;)
|
|
The documentation says lists "yes", "no", "pick", and numeric arguments.
But parse_boolean was attempted first, so various numeric arguments were
misinterpreted.
In particular, this fixes --private-users=0 to mean the same thing as
--private-users=0:65536.
While at it, use strndupa to avoid some error handling.
Also give a better error for an empty UID range. I think it's likely that
people will use --private-users=0:0 thinking that the argument means UID:GID.
|
|
|
|
Current systemd version detection routine cannot detect systemd 230,
only systmed >= 231. This means that we'll still use the legacy hierarchy
in some cases where we wouldn't have too. If somebody figures out a nice
way to detect systemd 230 this can be later improved.
|
|
as its output is fairly long.
|
|
systemd-soon-to-be-released-232 is able to deal with the mixed hierarchy.
So make an educated guess, and use the mixed hierarchy in that case.
Tested by running the host with mixed hierarchy (i.e. simply using a recent
kernel with systemd from git), and booting first a container with older systemd,
and then one with a newer systemd.
Fixes #4008.
|
|
|
|
The new function has 416 lines by itself!
"return log_error_errno" is used to nicely reduce the volume of error
handling code.
A few minor issues are fixed on the way:
- positive value was used as error value (EIO), causing systemd-nspawn
to return success, even though it shouldn't.
- In two places random values were used as error status, when the
actual value was in an unusual place (etc_password_lock, notify_socket).
Those are the only functional changes.
There is another potential issue, which is marked with a comment, and left
unresolved: the container can also return 133 by itself, causing a spurious
reboot.
|
|
If we are going to use the env var to override the detection result
anyway, there is not point in doing the detection, especially that
it can fail.
|
|
This is a bit crude and only works for new systemd versions which
have libsystemd-shared.
|
