summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-30Merge pull request #3596 from poettering/machine-cleanMartin Pitt
make "machinectl clean" asynchronous, and open it up via PolicyKit
2016-06-30man: minor typo "has already has happened" (#3635)Lukas Lösche
2016-06-30sd-event: expose the event loop iteration counter via ↵Lennart Poettering
sd_event_get_iteration() (#3631) This extends the existing event loop iteration counter to 64bit, and exposes it via a new function sd_event_get_iteration(). This is helpful for cases like issue #3612. After all, since we maintain the counter anyway, we might as well expose it. (This also fixes an unrelated issue in the man page for sd_event_wait() where micro and milliseconds got mixed up)
2016-06-30Merge pull request #3608 from teg/sd-device-driver-idLennart Poettering
sd-device: handle the 'drivers' pseudo-subsystem correctly
2016-06-30journalctl: Make temporary files directory configurable (#3574)ottopotto
journalctl: Use env variable TMPDIR to save temporary files
2016-06-30test: check resolved generated resolv.conf in networkd-test (#3628)Martin Pitt
* test: check resolved generated resolv.conf in networkd-test Directly verify the contents of /run/systemd/resolve/resolv.conf instead of /etc/resolv.conf. The latter might be a plain file or a symlink to something else (like Debian's resolvconf output), and in these cases we cannot make strong assumptions about the contents. Drop the "/etc/resolv.conf is a symlink" conditions and the "resolv.conf can have at most three nameservers" alternatives, as we know that resolved always adds all nameservers. Explicitly start resolved at the start of a test to ensure that it is running. * test: get along with existing system search domains in resolv.conf The previous change has uncovered a bug in the tests: Existing search domains can exist in resolv.conf which test_search_domains{,_too_long} didn't take into account. As existing domains take some of the "max 6 domains" and "max 255 chars" limit, don't expect that the last items from our test data actually appears in the output, just the first few.
2016-06-29Merge pull request #3516 from fsateler/shared-basicLennart Poettering
build-sys: Convert libshared into a private shared library
2016-06-29Merge pull request #3622 from keszybz/journalctl-this-bootLennart Poettering
Make `journalctl --directory=... --boot 0` work
2016-06-29sd-bus: Fix a read after free error in bus-match. (#3624) (#3625)Weng Xuetian
The loop on bus_match_run should break and return immediately if bus->match_callbacks_modified is true. Otherwise the loop may access free'd data.
2016-06-28systemctl mask of an non-existent unit should print a warning (#3521)Susant Sahani
fixes https://bugzilla.redhat.com/show_bug.cgi?id=842060
2016-06-28journalct: allow --boot=0 to DTRT with --file/--directoryZbigniew Jędrzejewski-Szmek
--boot=0 magically meant "this boot", but when used with --file/--directory it should simply refer to the last boot found in the specified journal. This way, --boot and --list-boots are consistent. Fixes #3603.
2016-06-28journalctl: use simpler variable names in get_boots()Zbigniew Jędrzejewski-Szmek
Those are just local variables and ref_boot_offset is especially obnoxious.
2016-06-28journalct: do no allow --this-boot to take argumentsZbigniew Jędrzejewski-Szmek
Before --this-boot was deprecated in a331b5e6d47243, it did not take any arguments.
2016-06-28journalctl: allow --file/--directory with --boot or --list-bootsZbigniew Jędrzejewski-Szmek
It works mostly fine, and can be quite useful to examine data from another system. OTOH, a single boot id doesn't make sense with --merge, so mixing with --merge is still not allowed.
2016-06-28Remove blank line in the output of “systemctl show” (#3614)Lénaïc Huard
“systemctl show” added an extra blank line after the dump of the EnvironmentFile property of the unit.
2016-06-28man: clarify NotifyAccess overriding (#3620)Luca Bruno
Type=notify has a magic overriding case where a NotifyAccess=none is turned into a NotifyAccess=main for sanity purposes. This makes docs more clear about such behavior: https://github.com/systemd/systemd/blob/2787d83c28b7565ea6f80737170514e5e6186917/src/core/service.c#L650:L651
2016-06-28resolved: add test for route-only domain filtering (#3609)Martin Pitt
With commit 6f7da49d00 route-only domains do not get put into resolv.conf's "search" list any more. Add a comment about the tri-state, to clarify its semantics and why we are passing a bool parameter into an int type. Also add a test case for it.
2016-06-28Added Indonesian translation (#3615)Andika Triwidada
2016-06-27basic/strv: introduce STRV_IGNORE macro (#3601)0xAX
to hide casting of '-1' strings and make code cleaner.
2016-06-27basic: pass flags to the fnmatch (#3606)Evgeny Vereshchagin
Fixes: ``` $ systemctl list-unit-files 'hey\*' 0 unit files listed. $ systemctl list-unit-files | grep hey hey\x7eho.service static ```
2016-06-27sd-device: new_from_subsystem_sysnam - support a real subsystem called 'drivers'Tom Gundersen
We support writing out tags and db files in case a real subsystem called 'drivers' exists, so there is no reason to refuse parsing it.
2016-06-27sd-device: device_id - set correctly for 'drivers'Tom Gundersen
The 'drivers' pseudo-subsystem needs special treatment. These pseudo-devices are found under /sys/bus/drivers/, so needs the real subsystem encoded in the device_id in order to be resolved. The reader side already assumed this to be the case.
2016-06-26sd-device: enumerator - do not abort enumeration if a device failsTom Gundersen
Collect the errors and return to the caller, but continue enumerating all devices.
2016-06-26Merge pull request #3572 from poettering/machinectl-shell-fixMartin Pitt
machinectl: interpret options placed between "shell" verb and machine name
2016-06-26catalog: make support URL to show in shipped catalog entries configurable ↵Lennart Poettering
(#3597) Let's allow distros to change the support URL to expose in catalog entries by default. It doesn't make sense to direct end-users to the upstream project for common errors. This adds a --with-support-url= switch to configure, which allows overriding the default at build-time. Fixes: #2516
2016-06-26machinectl: verify image existance on "start" and "enable" (#3579)Lennart Poettering
Let's make sure we catch early when a machine doesn't exist that is attempted to be started or enabled as system service.
2016-06-26networkd: use strv_fnmatch() (#3605)0xAX
2016-06-26man: document what Authenticated: in the systemd-resolve output actually ↵Lennart Poettering
means (#3571) My educated guess is that #3561 was filed due to confusion around the systemd-resolve "Data Authenticated:" output. Let's try to clean up the confusion a bit, and document what it means in the man page.
2016-06-26Merge pull request #3600 from poettering/fstab-generator-fixesMartin Pitt
Fstab generator fixes
2016-06-26basic/strv: use SWAP_TWO() macro (#3602)0xAX
2016-06-25nspawn: fix uid patching logic (#3599)Lennart Poettering
An incorrectly set if/else chain caused aus to apply the access mode of a symlink to the directory it is located in. Yuck. Fixes: #3547
2016-06-24build-sys: Add new libsystemd-shared private libraryFelipe Sateler
Link as many binaries as possible with it, to save storage space. Preserve the static libshared and libbasic for use in libraries, nss modules and udev. Libraries need to be static in order to avoid polluting the symbol namespace. Udev needs to be static so downstream can avoid strict version dependencies with the systemd package, and this can complicate upgrade scenarios.
2016-06-24build-sys: do not recompile everything for libsystemdFelipe Sateler
2016-06-24fstab-generator: minor simplificationLennart Poettering
2016-06-24fstab-generator: skip fsck for /usr on non-device file systemsLennart Poettering
We do the same already for the root device, hence follow the scheme for /usr too. (Also add some explanatory comments.)
2016-06-24fstab-generator: don't skip /usr handling if root handling didn't work correctlyLennart Poettering
Let's follow the same logic for all mounts here: log errors, and exit the process uncleanly ultimately, but do not skip further mounts if we encounter a problem with an earlier one. Fixes: #2344
2016-06-24systemctl: fix an error condition from "-1" to something meaningfulLennart Poettering
We really shouldn't make up errors like "-1", but use proper errno definitions.
2016-06-24fstab-generator: fix checking of fstab_node_to_udev_node() resultLennart Poettering
We have to check for OOM here, let's add that. There's really no point in checking for path_is_absolute() on the result however, as there's no particular reason why that should be refused. Also, we don't have similar checks for the other mount devices the generator deals with, hence don't bother with it here either. Let's remove that check. (And it shouldn't return made-up errors like "-1" in this case anyway.)
2016-06-24fstab-generator: document why we copy the root device into the usr device if ↵Lennart Poettering
unset Let's a comment about this, to avoid questions popping up like in #2344.
2016-06-24fstab-generator: let's use path_equal() for comparing pathsLennart Poettering
2016-06-24Merge pull request #3587 from martinpitt/masterEvgeny Vereshchagin
Fix some test issues
2016-06-24test: merge check_nspawn() into run_nspawn()Martin Pitt
This makes nspawn tests symmetric with run_qemu() which also exits with 1 if QEMU is not available.
2016-06-24pid1: restore console color support for containers (#3595)Franck Bui
Commit 3a18b60489504056f9b0b1a139439cbfa60a87e1 introduced a regression that disabled the color mode for container. This patch fixes this.
2016-06-24tests: track and check for timeoutsMartin Pitt
If run_qemu() exits with non-zero, this either meant that QEMU was not available (which should be a SKIP) or that QEMU timed out if $QEMU_TIMEOUT was set (which then should be a FAIL). Limit the exit code of run_qemu() to QEMU availability only, and track timeouts separately through the new $TIMED_OUT variable, which is then checked in check_result_qemu(). Do the same for $NSPAWN_TIMEOUT and run_nspawn() so that nspawn and QEMU work similarly.
2016-06-24machined: make sure CleanPool() method is opened up in the dbus policyLennart Poettering
The method is already hooked up to PolicyKit, hence let's open this up via the bus policy language too. Fixes: #3585
2016-06-24machined: "machinectl clean" can take a while, do it asynchronously from a ↵Lennart Poettering
background process This is a follow-up to 5d2036b5f3506bd0ff07042aee8d69c26db32298, and also makes the "machinectl clean" verb asynchronous, after all it's little more than a series of image removals. The changes required to make this happen are a bit more comprehensive as we need to pass information about deleted images back to the client, as well as information about the image we failed on if we failed on one. Hence, create a temporary file in /tmp, serialize that data into, and read it from the parent after the operation is complete.
2016-06-24machined: don't bother explicitly closing the errno pipeLennart Poettering
There's no point in explicitly closing the errno pipe, if we exit right after anyway. It doesn't hurt doing this either, but let's do this the same way for all cases where we use the "Operation" object right now, and in all other cases we do not close the pipe explicitly, hence don't do so here either.
2016-06-24cgroup: minor coding style fixLennart Poettering
2016-06-24tests: make TEST-12-ISSUE-3171 nspawn invocation consistent with other testsMartin Pitt
The result of check_nspawn does not mean much, and this forgot to ask check_nspawn() whether nspawn can be used at all. This brings TEST-12-ISSUE-3171 in line with other nspawn tests.
2016-06-24updateLennart Poettering