summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-09service: don't report alien child as alive when it's notRoss Lagerwall
When a sigchld is received from an alien child, main_pid is set to 0 then service_enter_running calls main_pid_good to check if the child is running. This incorrectly returned true because kill(main_pid, 0) would return >= 0. This fixes an error where a service would die and the cgroup would become empty but the service would still report as active (running).
2013-06-09Allow for the use of @ in remote host callsDaniel Wallace
Without this you have to use %40 with the -H flag because dbus doesn't like the @ sign being unescaped.
2013-06-09systemctl: remove extra padding from status outputZbigniew Jędrzejewski-Szmek
In 131601349 'systemctl: align all status fields to common column', padding was calculated for 'ListenStream: ...', etc. Later on in 45a4f7233 'systemctl: tweak output of Listen: fields a bit' output was changed to 'Listen: ... (stream)', but calculation didn't change. Just remove the calculation, since now the result will be always 8, and it it more important to have everything aligned to the widest field ("Main-PID"), than to save a few columns, usually at most two (e.g. "Listen"). Note: strlen is more natural, and is optimized to sizeof even with -O0.
2013-06-09logs-show: print multiline messagesZbigniew Jędrzejewski-Szmek
[ 0.019862] fedora kernel: CPU0: Thermal monitoring enabled (TM1) [ 0.019900] fedora kernel: Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 5 [ 0.020118] fedora kernel: Freeing SMP alternatives: 24k freed
2013-06-06update TODOLennart Poettering
2013-06-06cgroup: the "tasks" attribute is obsolete, cgroup.procs is the new replacementLennart Poettering
2013-06-06build-sys: we do not support --disable-largefile buildsLennart Poettering
2013-06-06build-sys: do not allow --enable staticCristian Rodríguez
2013-06-06service: execute ExecStopPost= commands when the watchdog timeout hitsLennart Poettering
We can assume that a service for which a watchdog timeout was triggered is unresponsive to a clean shutdown. However, it still makes sense to execute the post-stop cleanup commands that can be configured with ExecStopPost=. Hence, when the timeout is hit enter STOP_SIGKILL rather than FINAL_SIGKILL.
2013-06-06manager: Do not handle SIGKILL since we can notChengwei Yang
This is a minor fix because it's not a major issue, this fix just avoid to get EINVAL error from sigaction(2). There are two signals can not handled at user space, SIGKILL and SIGSTOP even we're PID 1, trying to handle these two signals will get EINVAL error. There are two kinds of systemd instance, running as system manager or user session manager, apparently, the latter is a general user space process which can not handle SIGKILL. The special pid 1 also can not do that refer to kernel/signal.c:do_sigaction(). However, pid 1 is unkillable because the kernel did attach SIGNAL_UNKILLABLE to it at system boot up, refer to init/main.c:start_kernel() --> rest_init() --> kernel_thread() --> kernel_init() --> init_post() current->signal->flags |= SIGNAL_UNKILLABLE
2013-06-05libsystemd-bus/bus-kernel.h: set MEMFD_MIN_SIZE to 128kHarald Hoyer
2013-06-05test-bus-kernel-benchmark: corrected output for memfd bisectHarald Hoyer
2013-06-05bus: benchmark - adjust printf and MAX_SIZEKay Sievers
2013-06-04keymap: add some more Asus laptop keysPierre Neidhardt
With Linux 3.9 (commit a935eaecef2b209ad661dadabb4e32b7c9a9b924), the Asus keyboard driver has changed to be more compliant to the symbol signification. This has led to some issues with udev. In particular, the XF86TouchpadToggle (a Fn key) does not work anymore on Asus X52J. I found another similar patch which does not seem to have been ever submitted/merged: https://launchpadlibrarian.net/73337842/95-keymap.rules.patch Find enclosed the patch containing both the launchpad patch and mine into one file. https://bugs.freedesktop.org/show_bug.cgi?id=65375
2013-06-04man: mention that units are 1024-basedZbigniew Jędrzejewski-Szmek
2013-06-04bus: unmap memfd retrieved from the memfd cacheKay Sievers
2013-06-04bus-benchmark: add performance data output modeKay Sievers
- for now, comment out munmap() check to enable memfd passing - print tab-separated values and header - add memcpy() to fill the memfd, to produce real-world results $ ./test-bus-kernel-benchmark SIZE COPY MEMFD 4194304 370 370 2097152 810 810 1048576 2130 2130 524288 4090 4090 262144 7080 7080 131072 11380 11380 65536 17140 17140 98304 13930 13930 114688 12890 12890 122880 12350 12350 126976 12150 12150 129024 12170 12170 130048 12040 12040 130560 12080 12080 130816 12010 12010 130944 12020 12020 131008 12040 12040 131040 12050 12050 131056 12010 12010 131064 12060 12060 131068 12040 12040 131070 11310 11310 131069 11420 11420 Copying/memfd are equally fast at 131068 bytes $ ./test-bus-kernel-benchmark chart SIZE COPY MEMFD 1 35570 23690 2 36470 23680 4 36160 23520 8 36600 22220 16 33900 20830 32 33990 21360 64 33480 21280 128 34050 20910 256 32950 21750 512 34730 21900 1024 33810 22890 2048 36280 23110 4096 30790 21610 8192 29380 21100 16384 26880 19820 32768 22510 17980 65536 17270 15180 131072 11400 11420 262144 7140 8270 524288 4090 5050 1048576 2110 2780 2097152 800 1140 4194304 350 580
2013-06-04systemctl: add missing verbs to helpZbigniew Jędrzejewski-Szmek
2013-06-04systemctl: limit logs in status to current bootZbigniew Jędrzejewski-Szmek
Also reworded a few debug messages for brevity, and added a log statement which prints out the filter at debug level: Journal filter: (((UNIT=sys-module-configfs.device AND _PID=1) OR (COREDUMP_UNIT=sys-module-configfs.device AND MESSAGE_ID=fc2e22bc6ee647b6b90729ab34a250b1) OR _SYSTEMD_UNIT=sys-module-configfs.device) AND _BOOT_ID=4e3c518ab0474c12ac8de7896fe6b154)
2013-06-04units: cleanup agetty command lineKarel Zak
* baud rate is optional and unnecessary for virtual terminals * term type is optional (default is 'linux' for virtual terminals and 'vt102' for serial lines) * long options are more user-friendly ... all this is supported since util-linux v2.20 (Aug 2011).
2013-06-04bus-benchmark: lower loop time to 100ms by default, to ensure "make check" ↵Lennart Poettering
finishes more quickly To get useful results you should however specify a much longer time on the command line.
2013-06-04test: determine number of transactions per second rather than time per ↵Lennart Poettering
transaction This way the measurements are not skewed by twoo short total measurement times, and results become stabler.
2013-06-03systemctl,core: allow nuking of symlinks to removed unitsZbigniew Jędrzejewski-Szmek
Before, one the unit file was deleted, install_context_for_removal() would refuse to look for symlinks. But we can remove dangling symlinks anyway. In principle, package installation/deinstallation scripts should do that before the unit is uninstalled, but they don't always do. Also, a user might have added additional symlinks manually. https://bugs.freedesktop.org/show_bug.cgi?id=62395
2013-06-03Makefile.am: merge conditionalsTom Gundersen
Merge all ENABLE_TMPFILES conditionals into one, and merge two ENABLE_EFI conditionals. Also make sure the .in files are always distributed.
2013-06-02analyze: fix font size on plotThomas Hindoe Paaboel Andersen
The font-size was missing a unit so they were ignored. This patch sets the unit to 'px' and adjusts the sizes a bit as the text got very small.
2013-06-02analyze: show unit file loading on plotThomas Hindoe Paaboel Andersen
This will add another color to the legend called "Loading unit files" Like the generators it will mark a part of the systemd bar indicating the time spent while loading unit files.
2013-06-02analyze: show generators on plotUmut Tezduyar
2013-06-02build-sys: option to disable tmpfilesUmut Tezduyar
2013-06-01journal: take KeepFree into account when reporting maximum sizeDaniel Albers
When reporting the maximum journal size add a hint if it's limited by KeepFree.
2013-05-31bus: update for kdbus changesKay Sievers
2013-05-30systemctl: suggest 'systemctl daemon-reload' without --systemZbigniew Jędrzejewski-Szmek
--system is default anyway, and some poor user might type 9 characters without needing to.
2013-05-30systemctl: add command set-log-levelVáclav Pavlín
Command changes current log level
2013-05-30systemctl: add commands set-default and get-defaultVáclav Pavlín
systemctl set-default NAME links the default.target to the given unit, get-default prints out the path to the currently set default target.
2013-05-30core: read "debug" from kernel commandline and set log levelLukas Nykryn
2013-05-30journald: DO recalculate the ACL mask, but only if it doesn't existJan Alexander Steffens (heftig)
Since 11ec7ce, journald isn't setting the ACLs properly anymore if the files had no ACLs to begin with: acl_set_fd fails with EINVAL. An ACL with ACL_USER or ACL_GROUP entries but no ACL_MASK entry is invalid, so make sure a mask exists before trying to set the ACL.
2013-05-30build-sys: more pretty colorsZbigniew Jędrzejewski-Szmek
2013-05-30core: use the same test as upstart for apparmorNirbheek Chauhan
Lennart: > Hmm, I just noticed this patch: > > https://code.launchpad.net/~mdeslaur/upstart/apparmor-support/+merge/164169 > > It contains a different check for AppArmor. Basically something like this: > > /sys/module/apparmor/parameters/enabled == 'Y' > > I'd prefer if we could change our code to do the same, given that > the Ubuntu guys are guys are upstream for apparmor. https://bugs.freedesktop.org/show_bug.cgi?id=63312
2013-05-30man: fix display of keys which appear in two sections in directive indexZbigniew Jędrzejewski-Szmek
When an index key appeared in multiple sections (e.g. CPUAffinity= was present in both "SYSTEM MANAGER DIRECTIVES" and "UNIT DIRECTIVES"), when lxml was used, the key would be not be displayed in all but one of those sections, and only an empty <term/> element would be present. This happens because lxml allows only one parent for each node, and when the same formatted element was used in multiple places, it was actually moved between them. Fix this by making a copy of the element. The bug was present since lxml support was introduced. Also fix some indentation issues.
2013-05-30man: link to XKB conf. guide in localectl(1)Zbigniew Jędrzejewski-Szmek
2013-05-30Fix CPUShares configuration optionEelco Dolstra
This fixes the error message "Unknown or unsupported cgroup attribute CPUShares".
2013-05-30bus: update for kdbus changesKay Sievers
2013-05-29systemd: record efi timestamps after /sys is mountedZachary Cook
This partially reverts commit c3a170f3, which moved efi_get_boot_timestamps too early in main(), before /sys is assured to be mounted Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64371 [tomegun: in particular /sys/firmware/efi/efivars needs to be mounted, which is not a problem if a systemd-initramfs containing the correct module is being used. But not everyone uses an initramfs...]
2013-05-29bus: rework benchmark test to actually yield useful resultsLennart Poettering
2013-05-29bus: when adding memfds to cache and we shorten them, make sure to unmap the ↵Lennart Poettering
remainder
2013-05-29bus: properly unmap mapped areaLennart Poettering
2013-05-24keymap: Add Logitech USB (iTouch)Martin Pitt
https://launchpad.net/bugs/1152377
2013-05-24bus: update kdbus.h from upstreamKay Sievers
2013-05-23systemctl: mangle names when avoiding dbusVáclav Pavlín
Unit names were mangled in function enable_unit only when dbus was used. This patch adds mangling also when the dbus is not in use. This makes it possible to say e.g.: systemctl --root=/path enable cups without spelling cups.service out in full.
2013-05-23Fix --no-ask-passwordJan Janssen
POSIX_ME_HARDER mode is disabled for localectl. It doesn't make much sense in case of localectl, and there's little reason for localectl to behave specially.
2013-05-22man: mention net.ifnames in kernel-command-line(3)Zbigniew Jędrzejewski-Szmek
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-12-15 06:08:28 +0000