| Age | Commit message (Collapse) | Author |
|---|
|
'systemctl cat' now works for templates too.
'systemctl edit' does not refuse to edit units that have changed on
disk. That restriction didn't seem useful, actually editing units that
have changed on disk before they are started is very reasonable.
'edit' with instances and templates works again:
Now:
$ build/systemctl edit getty@
Failed to copy /etc/systemd/system/getty@.service.d/override.conf to /etc/systemd/system/getty@.service.d/.override.confdff6290408c86369: Permission denied
$ build/systemctl edit getty@tty3
Failed to create directories for /etc/systemd/system/getty@tty3.service.d/override.conf: Permission denied
$ build/systemctl edit --full getty@tty3
Failed to copy /usr/lib/systemd/system/getty@.service to /etc/systemd/system/.getty@tty3.serviced3d175087e7e439b: Permission denied
Failed to create temporary file for /etc/systemd/system/getty@tty3.service: Permission denied
$ build/systemctl edit --full getty@
Failed to copy /usr/lib/systemd/system/getty@.service to /etc/systemd/system/.getty@.servicea3caad491c0f2f3d: Permission denied
Failed to create temporary file for /etc/systemd/system/getty@.service: Permission denied
|
|
|
|
No functional change.
|
|
|
|
Also make the error messages more specific to give a hint to the user
how to solve the problem.
|
|
No functional change. This is in preparation for using this in
systemctl in the future.
|
|
Provided by Benjamin Bellec
https://bugs.freedesktop.org/show_bug.cgi?id=87343
|
|
Note that the MS receivers likely work like the Logitech ones, i.e. all
devices connected show up with the same vid/pid/name. Full evidence remains to
be gathered.
|
|
|
|
|
|
|
|
|
|
|
|
Containers do not really support .device, .automount or .swap units;
Systems compiled without support for swap do not support .swap units;
Systems without kdbus do not support .busname units.
With this change attempts to start a unsupported unit types will result
in an immediate "unsupported" job result, which is a lot more
descriptive then before. Also, attempts to start device units in
containers will now immediately fail instead of causing jobs to be
enqueued that never go away.
|
|
level rather than debug
|
|
We sort by default DPI, not the first one in the list.
|
|
Provided by Peter Hutterer:
https://bugs.freedesktop.org/show_bug.cgi?id=87332
|
|
|
|
Commit 681f9718 introduced an additional null terminator for the zone names.
Increase the allocation of "transitions" to actually make room for this.
|
|
Bump libblkid requirement from 2.20 to 2.24.
util-linux 2.25 is actually required since fdbbad981cc5da8bb4ed7e9b6646e7a114745ec5
|
|
|
|
Otherwise this actually remains in the generated unit in /usr/lib.
If you want to keep it commented out, a m4-compatible way would be:
m4_ifdef(`HAVE_SMACK',
dnl Capabilities=cap_mac_admin=i
dnl SecureBits=keep-caps
)
|
|
- fix misspelling in filename (intenal -> internal)
- remove deleted hwdb-related file (nuked with sd-hwdb refactor)
|
|
Similar to how we handle other facilities that can be flagged out at
configure time, we should always distribute this input file.
http://lists.freedesktop.org/archives/systemd-devel/2014-December/026272.html
|
|
Previously, if we provided getty@.service to systemctl edit it would
have failed when using the bus because it is an invalid unit name.
But it would have succeeded when searching in the filesystem.
Now, we check if we have a template, if we do we search in the
filesystem, if we don't have a templae and we can use the bus, we do.
Furthermore, if we provided getty@tty1.service it would not have worked
when searching the filesystem, but it would have worked with the bus.
So now, when using the filesystem we use the template name and not the
unit name, and the same when logging errors.
(Also did a refactoring to avoid a long function)
|
|
Add more test cases for:
- unit_name_is_instance
- unit_name_to_instance
Add tests for:
- unit_name_template
- unit_name_is_template
|
|
try_context() is such a hot path that the hashmap lookup is expensive.
The number of contexts is small - it is the number of object types.
Using a hashmap is overkill. A plain array will do.
Before:
$ time ./journalctl --since=2014-06-01 --until=2014-07-01 > /dev/null
real 0m9.445s
user 0m9.228s
sys 0m0.213s
After:
$ time ./journalctl --since=2014-06-01 --until=2014-07-01 > /dev/null
real 0m5.438s
user 0m5.266s
sys 0m0.170s
|
|
This never had any callers. Contexts are freed when the MMapCache is
freed.
|
|
|
|
|
|
Note that numbers 0 and -1 are both replaced with OBJECT_UNUSED,
because they are treated the same everywhere (e.g. type_to_context()
translates them both to 0).
|
|
If type==0 and a non-NULL object were given as arguments to
journal_file_hmac_put_object(), its object type check would fail and it
would return -EBADMSG.
All existing callers use either a positive type or -1. Still, for
behavior consistency with journal_file_move_to_object() let's allow
type 0 to pass.
|
|
It has no other callers. It does not need to be in the header file.
|
|
The only user is sd_journal_enumerate_unique() and, as explained in
the previous commit (fed67c38e3 "journal: map objects to context set by
caller, not by actual object type"), the use of them there is now
superfluous. Let's remove them.
This reverts major parts of commits:
ae97089d49 journal: fix access to munmapped memory in
sd_journal_enumerate_unique
06cc69d44c sd-journal: fix sd_journal_enumerate_unique skipping values
Tested with an "--enable-debug" build and "journalctl --list-boots".
It gives the expected number of results. Additionally, if I then revert
the previous commit ("journal: map objects to context set by caller, not
to actual object type"), it crashes with SIGSEGV, as expected.
|
|
When the caller of journal_file_move_to_object() specifies type==0,
the object header is at first mapped in context 0. Then after the header
is checked, the whole object is mapped in a context determined by
the actual object type (which is not even range-checked using
type_to_context()). This looks wrong. It should map in the
caller-specified context.
An old comment in sd_journal_enumerate_unique() supports this view:
/* We do not use the type context here, but 0 instead,
* so that we can look at this data object at the same
* time as one on another file */
Clearly the expectation was that the data object will remain mapped
in context 0 without being pushed away by mapping other objects in
context OBJECT_DATA.
I suspect that this was the real bug that got fixed by ae97089d49
"journal: fix access to munmapped memory in sd_journal_enumerate_unique".
In other words, journal_file_object_keep/release are superfluous after
applying this patch.
|
|
This is useful for exposing unsafe access to mmapped objects after
the context that they were mapped in was already moved.
For example:
journal_file_move_to_object(f1, OBJECT_DATA, p1, &o1);
journal_file_move_to_object(f2, OBJECT_DATA, p2, &o2);
t = o1->object.type; /* this usually works, but is unsafe */
|
|
There will be more debugging options later.
--enable-debug will enable them all.
--enable-debug=hashmap will enable only hashmap debugging.
Also rename the C #define to ENABLE_DEBUG_* pattern.
|
|
An early version used underscore prefixes for internal functions, but
the current version uses the prefix "internal_".
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=87271
|
|
This way entries from the same brand with the same dpi and frequency
can be coalesced. It is also visually easier to find the right DPI
than order hexadecimal identifiers.
|
|
|
|
cppcheck would give up with "syntax error" without them. This led
to reports of syntax errors in unrelated locations and potentially
hid other errors
|
|
|
|
|
|
without parameters
|
|
from all interfaces
|
|
further arguments is passed
|
|
|
|
names it knows
|
|
cap_to_name(), for compat reasons
|
