| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Strictly speaking this isn't necessary for the /run/systemd/seats/
directory, since that is created anyway as the first seat is found, and
seat0 is always found. But let's be explicit here, and also create the
sessions/ and users/ directories, so that people can always install
inotify watches from very early on, even when nobody logged in yet.
|
|
Previously we were testing whether /sys/fs/cgroup/systemd/ was a mount
point. This might be problematic however, when the cgroup trees are bind
mounted into a container from the host (which should be absolutely
valid), which might create the impression that the container was running
systemd, but only the host actually is.
Replace this by a check for the existance of the directory
/run/systemd/system/, which should work unconditionally, since /run can
never be a bind mount but *must* be a tmpfs on systemd systems, which is
flushed at boots. This means that data in /run always reflects
information about the current boot, and only of the local container,
which makes it the perfect choice for a check like this.
(As side effect this is nice to Ubuntu people who now use logind with
the systemd cgroup hierarchy, where the old sd_booted() check misdetects
systemd, even though they still run legacy Upstart.)
|
|
|
|
|
|
|
|
|
|
First, rename root-fs.target to initrd-root-fs.target to clarify its usage.
Mount units with "x-initrd-rootfs.mount" are now ordered before
initrd-root-fs.target. As we sometimes construct /sysroot mounts in
/etc/fstab in the initrd, we want these to be mounted before the
initrd-root-fs.target is active.
initrd.target can be the default target in the initrd.
(normal startup)
:
:
v
basic.target
|
______________________/|
/ |
| sysroot.mount
| |
| v
| initrd-root-fs.target
| |
| v
| initrd-parse-etc.service
(custom initrd services) |
| v
| (sysroot-usr.mount and
| various mounts marked
| with fstab option
| x-initrd.mount)
| |
| v
| initrd-fs.target
| |
\______________________ |
\|
v
initrd.target
|
v
initrd-cleanup.service
isolates to
initrd-switch-root.target
|
v
______________________/|
/ |
| initrd-udevadm-cleanup-db.service
| |
(custom initrd services) |
| |
\______________________ |
\|
v
initrd-switch-root.target
|
v
initrd-switch-root.service
|
v
switch-root
|
|
Back from old times when we developed systemd on non-systemd hosts we
still mounted the missing directories such as the cgroup stuff even when
running with a PID != 1. There's no point for that anymore, so let's
just do that if we are actually PID 1, and never otherwise.
https://bugs.freedesktop.org/show_bug.cgi?id=62354
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=62085
/usr/lib/gcc/x86_64-pc-linux-gnu/4.6.3/../../../../lib64/libsystemd-login.so:
undefined reference to `sd_listen_fds'
In ee465038ce8 'build-sys: break dependency loop between
libsystemd-id128.la and -shared.la', a partial fix was applied, and
the use of functions from libsystemd-id128 was removed from
libsystemd-shared. Nevertheless, fdset.c was still using sd_listen_fds,
so libsystemd-login should be linked against libysystemd-daemon
or libsystemd-daemon-internal.
Tested-by: Elias Probst <mail@eliasprobst.eu>
|
|
|
|
mbiebl> src/tmpfiles/tmpfiles.c:221:13: error: ‘MAX_HANDLE_SZ’
undeclared (first use in this function)
Fixup for 427b47c4abaf4b5.
|
|
!= operator always returns something nonnegative, so the
error condition was not caught.
|
|
journalctl -u unit is not very useful, because it doesn't show
systemd messages about starting, stopping, coredumps, etc,
like systemctl status unit does. Make it show the same
information using the same rules.
If somebody really want to see just messages from by the unit,
it is easy enough to use _SYSTEMD_UNIT=...
|
|
After that functions which add matches, show_journal_by_unit
and show_journal_by_user_unit, become nearly identical, so
I merged them into one function.
|
|
|
|
Also move custom-*.xsl EXTRA_DIST additions closer to where
they are used.
|
|
|
|
There are very few differences in the implementations of the kill method in the
unit types that have one. Let's unify them.
This does not yet unify unit_kill() with unit_kill_context().
|
|
Just like mempcpy() is almost identical to memcpy() except the useful
return value, so is the relation of mempset() to memset().
|
|
|
|
|
|
|
|
Instead of using local-fs*.target in the initrd, use root-fs.target for
sysroot.mount and initrd-fs.target for /sysroot/usr and friends.
Using local-fs.target would mean to carry over the activated
local-fs.target to the isolated initrd-switch-root.target and thus in
the real root. Having local-fs.target already active after
deserialization causes ordering problems with the real root services and
targets.
We better isolate to targets for initrd-switch-root.target, which are
only available in the initrd.
|
|
Parallel builds would sometimes try to recreate the link,
and fail since 'ln -s' would refuse to overwrite.
|
|
The documentation makes it sound like ExecStopPost is only run when
stopping the service with `systemctl stop foo.service`
However, that is not the case, as it also gets run when the service
unexpectedly exists, crashes, or gets SIGKILLed.
|
|
This should help readers of the man or HTML pages know if the documentation
is out of date. An alternative to use a date generated from 'git log' was
considered, but since we try to keep user visible documentation up to date,
showing the project version should be enough.
|
|
They contained the date, which creates a problem with multiarch
packages, since the generated file would be different each time.
|
|
The loop was added in d848b9cbfa0ba72 'Move generic specifier functions to shared'.
|
|
ignored
|
|
The running jobs animation is supposed to hide itself when jobs are
progressing sufficiently fast.
|
|
This pulls in remote-fs-pre.target if remote-fs.target is needed.
Previously remote-fs-pre.target was not active, if no remote fs was
mounted from /etc/fstab. So, every manual remote fs mount was ordered
against the inactive remote-fs-pre.target and umount.target.
Because remote-fs-pre.target was not active, the remote fs was umounted
at umount.target time, which was too late (network already down).
Now remote-fs-pre.target is active, even if no remote fs is mounted.
On shutdown it is deactivated in the correct order and all manual remote
fs mounts also.
|
|
We should not try to get information about mount unit from fragment
if the unit was created because of /proc/self/mountinfo event.
|
|
|
|
BogdanR> I think it's cool it supports SMACK and that it encourages
them to use a propper mount point for smackfs but I don't
think it's cool that it's printing on the screen even when
I parse quiet to the kernel that "SMACK support is not
enabled ...".
|
|
It is only needed in files designed to be usable in standalone
compilation. In those files the #ifdefinery is indented. When
compiling in-tree, GNU_SOURCE is always defined, so remove one
definition.
|
|
system inherits the kernel default
|
|
Let's update bootchar to share the coding style a bit more with the rest
of the package.
- Some tabs/spaces fixes
- add #pragma to header
- split up header so that we have a 1:1 relation between .c and .h files
like everywhere else
- Prefix user command line arguments/configuration settings with "arg_".
- other coding style fixes
|
|
|
|
|
|
for the changes in 7b40ce553f0ec9487077e53f5bdc46580025901c
|
|
|
|
The udevadm utility is needed during early boot, so move it to
rootbindir to support split-/usr configurations.
|
|
|
|
|
|
<Lekensteyn> The 198 announcement mentions
"/etc/systemd/systemd/foobar.service.d/*.conf", is that a
typo? I only have a /etc/systemd/system/. Is there a
manpage describing this new feature?
|
|
|
|
I forgot to commit the layout file, because it was gitignored.
Fixed now.
|
