| Age | Commit message (Collapse) | Author |
|---|
|
If we are going to use the env var to override the detection result
anyway, there is not point in doing the detection, especially that
it can fail.
|
|
This is a bit crude and only works for new systemd versions which
have libsystemd-shared.
|
|
This patch adds support to remote checksum checksum offload to VXLAN.
This patch adds RemoteCheckSumTx and RemoteCheckSumRx vxlan configuration
to enable remote checksum offload for transmit and receive on the VXLAN tunnel.
|
|
RISC-V is an open source ISA in development since 2010 at UCB.
For more information, see https://riscv.org/
I am adding RISC-V support to Fedora:
https://fedoraproject.org/wiki/Architectures/RISC-V
There are three major variants of the architecture (32-, 64- and
128-bit). The 128-bit variant is a paper exercise, but the other
two really exist in silicon. RISC-V is always little endian.
On Linux, the default kernel uname(2) can return "riscv" for all
variants. However a patch was added recently which makes the kernel
return one of "riscv32" or "riscv64" (or in future "riscv128"). So
systemd should be prepared to handle any of "riscv", "riscv32" or
"riscv64" (in future, "riscv128" but that is not included in the
current patch). If the kernel returns "riscv" then you need to use
the pointer size in order to know the real variant.
The Fedora/RISC-V kernel only ever returns "riscv64" since we're
only doing Fedora for 64 bit at the moment, and we've patched the
kernel so it doesn't return "riscv".
As well as the major bitsize variants, there are also architecture
extensions. However I'm trying to ensure that uname(2) does *not*
return any other information about those in utsname.machine, so that
we don't end up with "riscv64abcde" nonsense. Instead those
extensions will be exposed in /proc/cpuinfo similar to how flags
work in x86.
|
|
Various mkosi bits
|
|
For some certification, it should not be possible to reboot the machine through ctrl-alt-delete. Currently we suggest our customers to mask the ctrl-alt-delete target, but that is obviously not enough.
Patching the keymaps to disable that is really not a way to go for them, because the settings need to be easily checked by some SCAP tools.
|
|
ioctl socket fixes, sd-bus error updates, resolved error addition, PAM stub process priv fix
|
|
Let's drop the caching of the setgroups /proc field for now. While there's a
strict regime in place when it changes states, let's better not cache it since
we cannot really be sure we follow that regime correctly.
More importantly however, this is not in performance sensitive code, and
there's no indication the cache is really beneficial, hence let's drop the
caching and make things a bit simpler.
Also, while we are at it, rework the error handling a bit, and always return
negative errno-style error codes, following our usual coding style. This has
the benefit that we can sensible hanld read_one_line_file() errors, without
having to updat errno explicitly.
|
|
gcc at some optimization levels thinks thes variables were used without
initialization. it's wrong, but let's make the message go anyway.
|
|
In the process execution code of PID 1, before
096424d1230e0a0339735c51b43949809e972430 the GID settings where changed before
invoking PAM, and the UID settings after. After the change both changes are
made after the PAM session hooks are run. When invoking PAM we fork once, and
leave a stub process around which will invoke the PAM session end hooks when
the session goes away. This code previously was dropping the remaining privs
(which were precisely the UID). Fix this code to do this correctly again, by
really dropping them else (i.e. the GID as well).
While we are at it, also fix error logging of this code.
Fixes: #4238
|
|
We generate these, hence we should also add errno translations for them.
|
|
Add this new error code (documented in RFC7873) to our list of known errors.
|
|
These were forgotten, let's add some useful mappings for all errors we define.
|
|
As suggested here:
https://github.com/systemd/systemd/pull/4296#issuecomment-251911349
Let's try AF_INET first as socket, but let's fall back to AF_NETLINK, so that
we can use a protocol-independent socket here if possible. This has the benefit
that our code will still work even if AF_INET/AF_INET6 is made unavailable (for
exmple via seccomp), at least on current kernels.
|
|
No need to look back at the past. Fedora 25 is here (almost).
|
|
This is required after systemd/mkosi#25.
|
|
No point in spamming the fs.
|
|
Since it looks like we'll wind up with a bunch of mkosi files for different
distros, it's probably better to keep them in a subdirectory.
|
|
|
|
[RFC] run systemd in an unprivileged container
|
|
(#4296)
The udev builtin command `net_setup_link` requires AF_INET and AF_INET6.
Fixes #4293.
|
|
hwdb: return conflicts in a well-defined order
|
|
It might be blocked through /proc/PID/setgroups
|
|
|
|
|
|
journal_rate_limit_test() (#4291)
Currently, the ratelimit does not handle the number of suppressed messages accurately.
Even though the number of messages reaches the limit, it still allows to add one extra messages to journal.
This patch fixes the problem.
|
|
|
|
|
|
[BridgeFDB] did not apply to bridge ports so far. This patch adds the proper
handling. In case of a bridge interface the correct flag NTF_MASTER is now set
in the netlink call. FDB MAC addresses are now applied in
link_enter_set_addresses to make sure the link is setup.
|
|
|
|
Add seccomp support for the s390 architecture (31-bit and 64-bit)
to systemd.
This requires libseccomp >= 2.3.1.
|
|
directory (#4226)
Fixes https://github.com/systemd/systemd/issues/3695
At the same time it adds a protection against userns chown of inodes of
a shared mount point.
|
|
|
|
|
|
If the new item is inserted before the first item in the list, then the
head must be updated as well.
Add a test to the list unit test to check for this.
|
|
If the corresponding mount unit is deserialized after the automount unit
then the expire event is set up in automount_trigger_notify(). However, if
the mount unit is deserialized first then the automount unit is still in
state AUTOMOUNT_DEAD and automount_trigger_notify() aborts without setting
up the expire event.
Explicitly call automount_start_expire() during coldplug to make sure that
the expire event is set up as necessary.
Fixes #4249.
|
|
|
|
* po: updated Swedish translation
* po: swedish: fix login vs write logs to confusion
Since previous commit (updated messages) there's now a mix of
different translation meanings for the same thing.
While both translations are technically correct I think the
meaning of the original messages are probably "to login" rather
than "to write log messages to". This commit switches all
translations to the "login" meaning.
|
|
Routing-domains-manpage tweak and NEWS update
|
|
|
|
This PR removes consecutive duplicate words from the man pages of:
* `resolved.conf.xml`
* `systemd.exec.xml`
* `systemd.socket.xml`
|
|
|
|
I think it's easier to read peoples' names with this change.
|
|
|
|
Put more emphasis on the routing part. This is the more interesting
thing, and also more complicated and novel.
Explain "search domains" as the special case. Also explain the effect of
~. in more detail.
|
|
<entry>-ies must be a single line of text. Otherwise docbook does strange
things to the indentation.
|
|
This prevented systemd-analyze from unprivileged operation on older systemd
installations, which should be possible.
Also, we shouldn't touch the file system in test mode even if we can.
|
|
SYSTEMD_UNIT_PATH=foobar: systemd-analyze verify barbar/unit.service
will load units from barbar/, foobar/, /etc/systemd/system/, etc.
SYSTEMD_UNIT_PATH= systemd-analyze verify barbar/unit.service
will load units only from barbar/, which is useful e.g. when testing
systemd's own units on a system with an older version of systemd installed.
|
|
[Unit]
Before=foobar.device
[Service]
ExecStart=/bin/true
Type=oneshot
$ systemd-analyze verify before-device.service
before-device.service: Dependency Before=foobar.device ignored (.device units cannot be delayed)
|
|
Fixes #3830
|
