| Age | Commit message (Collapse) | Author |
|---|
|
This is just an example, so no error-handling is done here anyway.
|
|
On older kernels before this patch:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=e8b671460410c8fd996c8a1c228b718c547cc236
ppp-ioctl.h did not pull in ppp_defs.h which results in build errors
|
|
Otherwise we could attempt to flush the journal while /var/log/ was
still ro, and silently skip journal flushing.
The way that errors in flushing are handled should still be changed to
be more transparent and robust.
|
|
Since commit 19f8d037833f2 'timer: order OnCalendar units after
timer-sync.target if DefaultDependencies=no' timers might get a
dependency on time-sync.target, which does not really belong in early
boot. If ntp is enabled, time-sync.target might be delayed until a
network connection is established.
It turns out that majority of timer units found in the wild do not
need to be started in early boot. Out of the timer units available in
Fedora 21, only systemd-readahead-done.timer and mdadm-last-resort@.timer
should be started early, but they both have DefaultDependencies=no,
so are not part of timers.target anyway. All the rest look like they
will be fine with being started a bit later (and the majority even
much later, since they run daily or weekly).
Let timers.target be pulled in by basic.target, but without the
temporal dependency. This means timer units are started on a "best
effort" schedule.
https://bugzilla.redhat.com/show_bug.cgi?id=1158206
|
|
|
|
This way they always show up together with 'Found ordering cycle...'.
Ordering cycles are a serious error and a major pain to debug. If
quiet is enabled, only the first and the last line of output are
shown:
systemd[1]: Found ordering cycle on basic.target/start
systemd[1]: Breaking ordering cycle by deleting job timers.target/start
systemd[1]: Job timers.target/start deleted to break ordering cycle starting with basic.target/start
which isn't particularly enlightening. So just show the whole message
at the same level.
https://bugzilla.redhat.com/show_bug.cgi?id=1158206
|
|
|
|
This library negotiates a PPPoE channel. It handles the discovery stage and
leaves the session stage to the kernel. A further PPP library is needed to
actually set up a PPP unit (negotatie LCP, IPCP and do authentication), so in
isolation this is not yet very useful.
The test program has two modes:
# ./test-pppoe
will create a veth tunnel in a new network namespace, start pppoe-server on one
end and this client library on the other. The pppd server will time out as no
LCP is performed, and the client will then shut down gracefully.
# ./test-pppoe eth0
will run the client on eth0 (or any other netdev), and requires a PPPoE server
to be reachable on the local link.
|
|
FILE * wants cleanup_fclose().
Spotted by udev hwdb segfaulting in gnome-continuous' buildroot
construction.
|
|
s/threat/treat/g
|
|
|
|
A recent commit (2f3a215) changed the parsing of /proc/cmdline to use a
shell array. Unfortunately, this introduced a bug: "read -ar line"
populates the shell variable $r, not $line. This breaks installation of
new loader entries:
# kernel-install add 3.17.1-304.fc21.x86_64 \
/boot/vmlinuz-3.17.1-304.fc21.x86_64
Could not determine the kernel command line parameters.
Please specify the kernel command line in /etc/kernel/cmdline!
This commit alters the read command to correctly populate the $line
array instead.
|
|
This service is now synchronous, so "trigger" is misleading.
|
|
|
|
|
|
|
|
The duid data passed by the caller does not include the DUID type,
but sd_dhcp6_client_set_duid() was treating it like it did.
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=85657
|
|
The term "priority" is misleading because higher levels have lower
priority. "Level" is clearer and shorter.
This commit touches only the textual descriptions, not function and variable
names themselves. "Priority" is used in various command-line switches and
protocol constants, so completly getting rid of "priority" is hard.
I also left "priority" in various places where the clarity suffered
when it was removed.
|
|
Invalid log levels lead to a assert failure later on.
https://bugs.freedesktop.org/show_bug.cgi?id=85657
|
|
This brings udev logging style a bit closer to normal systemd convention.
|
|
Also change the default prefixlen function to only access the first octet of the in_addr.
|
|
|
|
|
|
|
|
|
|
|
|
event loop
We really should not run manual event loops anymore, but standardize on
sd_event, so that we can run sd_bus connections from it eventually.
|
|
__attribute__((used)) is not enough to force static variables to
be carried over to a compiled program from a library. Mappings defined
in libsystemd-shared.a were not visible in the compiled binaries.
To ensure that the mappings are present in the final binary, the
tables are made non-static and are given a real unique name by which
they can be referenced.
To use a mapping defined not in the local compilation unit (e.g. in
a library) a reference to the mapping table is added. This is done
by including a declaration in the header file.
Expected values in test-engine are fixed to reflect the new mappings.
|
|
Depending on the link order, holes might appear in the body of
the sd_bus_errnomap section. Ignore them.
Adds a simple test to print the table to help with debugging such
issues in the future.
|
|
Instead, only depend on the actual file systems we need.
This should solve dep loops on setups where remote-fs.target is moved
into late boot.
|
|
|
|
f7101b7368df copied some logic to prevent enabling masked units, but
also added a check which causes attempts to enable templated units to
fail. Since we know the logic beyond this check will properly handle
units which truly do not exist, we can rely on the unit file state
comparison to suffice for expressing the intent of f7101b7368df.
ref: https://bugs.archlinux.org/task/42616
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
add tests for:
- strv_find_startswith
- strv_push_prepend
- strv_consume_prepend
|
|
|
|
add tests for the following functions:
- write_string_file_no_create
- load_env_file_pairs
|
|
The raw socket sd_event_source used for DHCP server solicitations
was simply dropped on the floor when creating the new UDP socket
after a lease has been acquired. Clean it up properly so we're
not still listening and responding to events on it.
|
|
|
|
I tried to preserve most errno values, but in some cases they were
inconsistent (different errno values for the same error name) or just
mismatched.
|
|
This allows custom "name" ↔ errno mappings to be registered.
Tables from all compilation units are concatenated.
|
|
|
|
The option simply enables hashmap debugging by defining
ENABLE_HASHMAP_DEBUG.
I suggest developing new code with it enabled, to have the iterator checks.
|
