| Age | Commit message (Collapse) | Author |
|---|
|
According to bootup(7) and the behavior when /usr is specified in /etc/fstab, the /sysroot/usr mount should be before initrd-fs.target, not before initrd-root-fs.target.
|
|
The sysroot mount is already taken care of by the add_sysroot_mount function. With this condition left in, we can get something like this:
initrd-root-fs.target.requires
`-- usr.mount -> /run/systemd/generator/usr.mount
in the main system (i.e., not in the initramfs). In the initramfs, the previous condition already kicks in.
|
|
transaction: downgrade warnings about wanted units which are not found
|
|
Fourteenth DNSSEC PR
|
|
[v4] bus-util: print "systemctl --user" on user service manager
|
|
If a unit was pulled by a Wants= dependency but its unit file was not
present then we logged this as an error.
However Wants= might be used to configure a soft/optional dependency
on another unit, ie. start an optional service only if it's installed
otherwise simply skip it. In this case emitting an error doesn't look
appropriate.
But it's still an error if the optional dependency exists but its
activation fails for any reasons.
|
|
Fix memory leak on daemon-reload
|
|
I used it for d9814c76ec35e53a6b6448c0
Very handy:)
|
|
==1== HEAP SUMMARY:
==1== in use at exit: 61,728 bytes in 22 blocks
==1== total heap usage: 258,122 allocs, 258,100 frees, 78,219,628
bytes allocated
==1==
==1== 16 bytes in 1 blocks are definitely lost in loss record 1 of 6
==1== at 0x4C2BBCF: malloc (vg_replace_malloc.c:299)
==1== by 0x1E350E: memdup (alloc-util.c:34)
==1== by 0x135AFB: memdup_multiply (alloc-util.h:74)
==1== by 0x140F97: manager_set_default_rlimits (manager.c:2929)
==1== by 0x1303DA: manager_set_defaults (main.c:737)
==1== by 0x133A02: main (main.c:1718)
==1==
==1== 272 bytes in 17 blocks are definitely lost in loss record 2 of 6
==1== at 0x4C2BBCF: malloc (vg_replace_malloc.c:299)
==1== by 0x1E350E: memdup (alloc-util.c:34)
==1== by 0x135AFB: memdup_multiply (alloc-util.h:74)
==1== by 0x140F97: manager_set_default_rlimits (manager.c:2929)
==1== by 0x1303DA: manager_set_defaults (main.c:737)
==1== by 0x13480D: main (main.c:1828)
==1==
==1== LEAK SUMMARY:
==1== definitely lost: 288 bytes in 18 blocks
==1== indirectly lost: 0 bytes in 0 blocks
==1== possibly lost: 0 bytes in 0 blocks
==1== still reachable: 61,440 bytes in 4 blocks
==1== suppressed: 0 bytes in 0 blocks
==1== Reachable blocks (those to which a pointer was found) are not
shown.
==1== To see them, rerun with: --leak-check=full --show-leak-kinds=all
|
|
When a unit was started with "systemctl --user" and it failed, error
messages is printed as "systemctl status". But it should be "systemctl
--user status".
|
|
README, tests: remove /etc/mtab
|
|
This is a followup for 1d40ddb
|
|
We frequently unescape DNS label follwed by IDNA undoing. We now have a function that does that in one step, hence use
it everywhere.
|
|
|
|
This way we become compatible with DNS names with embedded NUL bytes.
|
|
skip first label
|
|
In contrast to ascii_strcasecmp_nn() it takes two character buffers with their individual length. It will then compare
the buffers up the smaller size of the two buffers, and finally the length themselves.
|
|
ascii_strcasecmp_n()
This makes our code compatible with embedded NUL bytes, as we don't care about NUL bytes anymore.
|
|
|
|
|
|
Properly handle RRs that begin with an asterisk label. These are the unexpanded forms of wildcard domains and appear in
NSEC RRs for example. We need to make sure we handle the signatures of these RRs properly, since they mostly are
considered normal RRs, except that the RRSIG labels counter is one off for them, as the asterisk label is always
excluded of the signature.
|
|
Let's determine the source of synthesis once instead of for each RR in the RRset.
|
|
dns_name_startswith() is to dns_name_endswith() as startswith() is to endswith().
|
|
|
|
Closes: #2299
|
|
|
|
|
|
|
|
man/tmpfiles.d: add note about permissions and ownership of symlinks
|
|
...because this is might not be obvious.
|
|
Add machine-id setting
|
|
Allow for overriding all other machine-ids which may be present on
the system using a kernel command line systemd.machine_id or
--machine-id= option.
This is especially useful for network booted systems where the
machine-id needs to be static, or for containers where a specific
machine-id is wanted.
|
|
build-sys: regenerate %.m4 -> % on reconfigure
|
|
sd-event: minor fixups to delays profiling changes
|
|
|
|
sd-event: instrument sd_event_run() for profiling delays
|
|
Set SD_EVENT_PROFILE_DELAYS to activate accounting and periodic logging
of the distribution of delays between sd_event_run() calls.
Time spent in dispatching as well as time spent outside of
sd_event_run() is measured and accounted for. Every 5 seconds a
logarithmic histogram loop iteration delays since 5 seconds previous is
logged.
This is useful in identifying the frequency and magnitude of latencies
affecting the event loop, which should be kept to a minimum.
|
|
tree-wide: use xsprintf() where applicable
|
|
Also add a coccinelle receipt to help with such transitions.
|
|
capabilities: added support for ambient capabilities.
|
|
Fix miscalculated buffer size and uses of size-unlimited sprintf()
|
|
|
|
The ambient capability tests are only run if the kernel has support for
ambient capabilities.
|
|
This patch adds support for ambient capabilities in service files. The
idea with ambient capabilities is that the execed processes can run with
non-root user and get some inherited capabilities, without having any
need to add the capabilities to the executable file.
You need at least Linux 4.3 to use ambient capabilities. SecureBit
keep-caps is automatically added when you use ambient capabilities and
wish to change the user.
An example system service file might look like this:
[Unit]
Description=Service for testing caps
[Service]
ExecStart=/usr/bin/sleep 10000
User=nobody
AmbientCapabilities=CAP_NET_ADMIN CAP_NET_RAW
After starting the service it has these capabilities:
CapInh: 0000000000003000
CapPrm: 0000000000003000
CapEff: 0000000000003000
CapBnd: 0000003fffffffff
CapAmb: 0000000000003000
|
|
Change the capability bounding set parser and logic so that the bounding
set is kept as a positive set internally. This means that the set
reflects those capabilities that we want to keep instead of drop.
|
|
journal: normalize priority of logging sources
|
|
function.
Not sure if this results in an exploitable buffer overflow, probably not
since the the int value is likely sanitized somewhere earlier and it's
being put through a bit mask shortly before being used.
|
|
Thirteenth DNSSEC patch set
|
|
|
|
We wouldn't know how to validate them, since they are the signatures, and hence have no signatures.
|
