summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-09-04sd-login: rework error handlingLennart Poettering
Makre sure we always return sensible errors for the various, following the same rules, and document them in a comment in sd-login.c. Also, update all relevant man pages accordingly.
2015-09-04sd-event: make sure RT signals are not droppedLennart Poettering
RT signals operate in a queue, and we should be careful to never merge two queued signals into one. Hence, makes sure we only ever dequeue a single signal at a time and leave the remaining ones queued in the signalfd. In order to implement correct priorities for the signals introduce one signalfd per priority, so that we only process the highest priority signal at a time.
2015-09-04test: add one more test case for parse_pid()Lennart Poettering
2015-09-04nspawn: enable all controllers we can for the "payload" subcgroup we createLennart Poettering
In the unified hierarchy delegating controller access is safe, hence make sure to enable all controllers for the "payload" subcgroup if we create it, so that the container will have all controllers enabled the nspawn service itself has.
2015-09-04cgroup: always read the supported controllers from the root cgroup of the ↵Lennart Poettering
local container Otherwise we might end up thinking that we support more controllers than actually enabled for the container we are running in.
2015-09-04cgroup: fix potential access of uninitialized variableLennart Poettering
2015-09-04cgroup-util: make cg_pid_get_path() return -ENODATA when controller can't be ↵Lennart Poettering
found If the controller managed by systemd cannot found in /proc/$PID/cgroup, return ENODATA, the usual error for cases where the data being looked for does not exist, even if the process does.
2015-09-04cgroup: fix potential bad memory accessLennart Poettering
2015-09-04cgroup: make sure cg_is_empty_recursive() returns 1 for non-existing cgroupsLennart Poettering
Previously, on the legacy hierarchy a non-existing cgroup was considered identical to an empty one, but the unified hierarchy the check for a non-existing one returned ENOENT.
2015-09-04cgroup: when comparing agent paths, use path_equal()Lennart Poettering
After all a path is a path is a path and we should use path_equal() to comapre those.
2015-09-04audit: audit calls should return ENODATA when process are not in an audit ↵Lennart Poettering
session ENODATA is how we usually indicate such "missing info" cases, so we should do this here, too.
2015-09-04util: document why parse_uid() returns ENXIOLennart Poettering
parse_uid() returns EINVAL for invalid strings, but ENXIO for the (uid_t) -1 user ids in order to distinguish these two cases. Document this.
2015-09-04core: split up manager_get_unit_by_pid()Lennart Poettering
Let's move the actual cgroup part of it into a new separate function manager_get_unit_by_pid_cgroup(), and then make manager_get_unit_by_pid() just a wrapper that also checks the two pid hashmaps. Then, let's make sure the various calls that want to deliver events to the owners of a PID check both hashmaps and the cgroup and deliver the event to *each* of them. OTOH make sure bus calls like GetUnitByPID() continue to check the PID hashmaps first and the cgroup only as fallback.
2015-09-04cgroup: move controller to dirname translation into join_path_legacy()Lennart Poettering
Let's simplify things a bit.
2015-09-04util: add new uid_is_valid() callLennart Poettering
This simply factors out the uid validation checks from parse_uid() and uses them everywhere. This simply verifies that the passed UID is neither 64bit -1 nor 32bit -1.
2015-09-04macro: introduce new PID_TO_PTR macros and make use of themLennart Poettering
This adds a new PID_TO_PTR() macro, plus PTR_TO_PID() and makes use of it wherever we maintain processes in a hash table. Previously we sometimes used LONG_TO_PTR() and other times ULONG_TO_PTR() for that, hence let's make this more explicit and clean up things.
2015-09-04man: always use the same example in nss module documentationLennart Poettering
Show the same recommended example file in all three man pages, just highlight the different, relevant parts. This should be less confusing for users, and clarify what we actually recommend how /etc/nsswitch.conf is set up.
2015-09-04hwdb: Update database of Bluetooth company identifiersMarcel Holtmann
2015-09-03udev: ignore ENOEXEC from cgroup lookupDavid Herrmann
The recent cgroup-rework changed the error code for un-mounted cgroupfs to ENOEXEC. Make sure udev ignores it just like ENOENT and does not spill warnings on the screen.
2015-09-03Merge pull request #1127 from neheb/masterDaniel Mack
hwdb: Add Mionix Mouse
2015-09-03Merge pull request #1134 from reverendhomer/patch-1Lennart Poettering
cgroup-util: Removed unreachable statement in cg_get_path
2015-09-03cg_get_path: Removed unreachable statementreverendhomer
controller cannot be NULL because if-statement in L509 has return Coverity #1322379
2015-09-03Merge pull request #1123 from phomes/scope-no-bool-vs-intLennart Poettering
scope: do not compare a bool return with "<= 0"
2015-09-03Merge pull request #1126 from phomes/indentation2Lennart Poettering
tree-wide: fix indentation
2015-09-02Add Mionix MouseMangix
2015-09-02tree-wide: fix indentationThomas Hindoe Paaboel Andersen
2015-09-02scope: do not compare a bool return with "<= 0"Thomas Hindoe Paaboel Andersen
2015-09-02Merge pull request #1119 from teg/virtio-namesKay Sievers
udev: net_id - support predictable ifnames on virtio buses
2015-09-02udev: net_id - support predictable ifnames on virtio busesTom Gundersen
Virtio buses are undeterministically enumerated, so we cannot use them as a basis for deterministic naming (see bf81e792f3c0). However, we are guaranteed that there is only ever one virtio bus for every parent device, so we can simply skip over the virtio buses when naming the devices.
2015-09-02Merge pull request #1118 from jsynacek/man-dot-d-v2Lennart Poettering
man: *.d conf directories: add note about initrd regeneration
2015-09-02Merge pull request #1116 from poettering/unified-rebasedLennart Poettering
core: unified cgroup hierarchy support
2015-09-02Merge pull request #1112 from poettering/sd-bus-container-fixesDavid Herrmann
machined and sd-bus container fixes
2015-09-02man: *.d conf directories: add note about initrd regenerationJan Synacek
2015-09-02Merge pull request #1117 from evverx/detect-parallels-virtDaniel Mack
virt: detect parallels virtualization
2015-09-02virt: detect parallels virtualizationEvgeny Vereshchagin
inspired by http://people.redhat.com/~rjones/virt-what/ see: * http://git.annexia.org/?p=virt-what.git;a=blob;f=virt-what.in;h=a5ed33ef3e4bfa3281c9589eccac4d92dff1babe;hb=HEAD#l200 * http://git.annexia.org/?p=virt-what.git;a=blob;f=virt-what.in;h=a5ed33ef3e4bfa3281c9589eccac4d92dff1babe;hb=HEAD#l253
2015-09-01core: unified cgroup hierarchy supportLennart Poettering
This patch set adds full support the new unified cgroup hierarchy logic of modern kernels. A new kernel command line option "systemd.unified_cgroup_hierarchy=1" is added. If specified the unified hierarchy is mounted to /sys/fs/cgroup instead of a tmpfs. No further hierarchies are mounted. The kernel command line option defaults to off. We can turn it on by default as soon as the kernel's APIs regarding this are stabilized (but even then downstream distros might want to turn this off, as this will break any tools that access cgroupfs directly). It is possibly to choose for each boot individually whether the unified or the legacy hierarchy is used. nspawn will by default provide the legacy hierarchy to containers if the host is using it, and the unified otherwise. However it is possible to run containers with the unified hierarchy on a legacy host and vice versa, by setting the $UNIFIED_CGROUP_HIERARCHY environment variable for nspawn to 1 or 0, respectively. The unified hierarchy provides reliable cgroup empty notifications for the first time, via inotify. To make use of this we maintain one manager-wide inotify fd, and each cgroup to it. This patch also removes cg_delete() which is unused now. On kernel 4.2 only the "memory" controller is compatible with the unified hierarchy, hence that's the only controller systemd exposes when booted in unified heirarchy mode. This introduces a new enum for enumerating supported controllers, plus a related enum for the mask bits mapping to it. The core is changed to make use of this everywhere. This moves PID 1 into a new "init.scope" implicit scope unit in the root slice. This is necessary since on the unified hierarchy cgroups may either contain subgroups or processes but not both. PID 1 hence has to move out of the root cgroup (strictly speaking the root cgroup is the only one where processes and subgroups are still allowed, but in order to support containers nicey, we move PID 1 into the new scope in all cases.) This new unit is also used on legacy hierarchy setups. It's actually pretty useful on all systems, as it can then be used to filter journal messages coming from PID 1, and so on. The root slice ("-.slice") is now implicitly created and started (and does not require a unit file on disk anymore), since that's where "init.scope" is located and the slice needs to be started before the scope can. To check whether we are in unified or legacy hierarchy mode we use statfs() on /sys/fs/cgroup. If the .f_type field reports tmpfs we are in legacy mode, if it reports cgroupfs we are in unified mode. This patch set carefuly makes sure that cgls and cgtop continue to work as desired. When invoking nspawn as a service it will implicitly create two subcgroups in the cgroup it is using, one to move the nspawn process into, the other to move the actual container processes into. This is done because of the requirement that cgroups may either contain processes or other subgroups.
2015-09-01Merge pull request #1115 from phomes/hwdb-miceLennart Poettering
hwdb: more mice
2015-09-01hwdb: more miceThomas Hindoe Paaboel Andersen
2015-09-01Merge pull request #1098 from filbranden/cpuaffinity2Lennart Poettering
Getting rid of FOREACH_WORD_QUOTED and some more cleanup in config_parse_cpu_affinity2
2015-09-01Merge pull request #1107 from msekletar/selinux-get-raw-contextLennart Poettering
selinux: always use *_raw API from libselinux
2015-09-01sd-bus: when connecting to a container, don't fall back to host busLennart Poettering
We should never connect to the host bus as fallback if connecting to a container failed via one method. Otherwise connecting to a dbus1 container will always result in a connection to the host.
2015-09-01sd-bus: when connecting to a kdbus container bus pass error upLennart Poettering
We rely on the correct error used when opening the kdbus device node, hence let's make sure we pass it up from the namespaced child process to the process which actually wants to connect.
2015-09-01machined: introduce a ptsname_namespace() call and make use of itLennart Poettering
The call is like ptsname() but does not assume the pty path was accessible in the local namespace. It uses the same internal ioctl though.
2015-09-01machined: call unlockpt() in container, not hostLennart Poettering
It makes assumptions about the pty path, hence better call it in the container namespace rather than the host.
2015-09-01core: Log parse errors in config_parse_cpu_affinity2Filipe Brandenburger
2015-09-01Merge pull request #1111 from poettering/more-cgroup-fixesTom Gundersen
More cgroup fixes
2015-09-01Merge pull request #1099 from filbranden/joincontrollers2Lennart Poettering
Getting rid of FOREACH_WORD_QUOTED in config_parse_join_controllers
2015-09-01Merge pull request #1102 from heftig/masterLennart Poettering
build-sys: Look for gcc-* binutils wrappers only if we're using GCC
2015-09-01Merge pull request #1109 from phomes/man-typosLennart Poettering
man: fix typos in systemd-path.xml
2015-09-01Merge pull request #1110 from evverx/run-interactive-authLennart Poettering
run: enable interactive authorization