| Age | Commit message (Collapse) | Author |
|---|
|
|
|
eightteenth dnssec patch
|
|
coredump: fix bug that loses core dump files when core dumps are compressed and disk space is low.
|
|
and disk space is low.
Previously the save_external_coredump function returned a file
descriptor corresponding to the dumped file. This descriptor was used
for two different purposes by calling code: a) access to the raw core
dump data; b) testing candidate files (via inode comparisons) while
vacuuming to protect the current core dump from vacuuming.
The descriptor returned always corresponded to a file containing the raw
core dump data. However if compresson was used and the core dump was
compressed then the descriptor returned did not correspond to the file
that would eventually be left on disk (ie the compressed file). Thus
the file was never protected by vacuuming. When disk space was low all
core dumps including the current one would be vacuumed and the
corresponding log message referred to a file that no longer existed.
This resulted in the following error message from coredumpctl if the
missing core dump was requested:
Cannot retrieve coredump from journal nor disk.
Failed to retrieve core: No such file or directory
save_external_coredump now returns two descriptors, one to be used for
inode comparisons to prevent overzealous vacuuming and one to be used
for raw data access. When compression is not used the returned inode
comparison descriptor will be invalid, indicating that the raw data
access descriptor should be used for inode comparisons as well.
Corresponding use of save_external_coredump and the returned
descriptors also updated.
|
|
systemctl: is-active/failed should return 0 if at least one unit is in given state
Previously:
[lnykryn@notas lnykryn-systemd(is-active-failed)]$ systemctl is-failed fail cups; echo $?
failed
active
1
now:
[lnykryn@notas lnykryn-systemd(is-active-failed)]$ ./systemctl is-failed fail cups; echo $?
failed
active
0
|
|
Let's not accept onboard interface indexes, that are so high that they are obviously non-sensical.
Fixes: #2407
|
|
So far, abritrary NSEC and NSEC3 RRs were implicitly consider "primary" for any transaction, meaning we'd abort the
transaction immediately if we couldn't validate it. With this patch this logic is removed, and the NSEC/NSEC3 RRs will
not be considered primary anymore. This has the effect that they will be dropped from the message if they don't
validate, but processing continues. This is safe to do, as they are required anyway to validate positive wildcard and
negative responses, and if they are missing then, then message will be considered unsigned, which hence means the
outcome is effectively the same.
This is benefical in case the server sends us NSEC/NSEC3 RRs that are not directly related to the lookup we did, but
simply auxiliary information. Previously, if we couldn't authenticate those RRs we'd fail the entire lookup while with
this change we'll simply drop the auxiliary information and proceed without it.
|
|
authenticated
In some cases we get NSEC3 RRs that have not been authenticated (because the chain of trust to the root is somewhere
broken). We can use these for checking negative replies, as long as we don't claim they were ultimately authenticated.
This means we need to be able to deal with NSEC3 RRs that lack RRSIG metadata.
|
|
|
|
|
|
We already properly propagate errors from transactions to queries. Make sure that errors that happened during handling
of query candidates are propagated to the query, too.
|
|
Whenever we encounter an OS error we did not expect, we so far put the transaction into DNS_TRANSACTION_RESOURCES
state. Rename this state to DNS_TRANSACTION_ERRNO, and save + propagate the actual system error to the caller. This
should make error messages triggered by system errors much more readable by the user.
|
|
|
|
Line breaks default to 119 characters for systemd sources now, configured through the .vimrc and .dir-local.el files.
However, for the catalog files we really should stick to 79 chars, as they are regularly shown on terminal screens.
|
|
If we downgrade from DNSSEC to non-DNSSEC mode, let's log about this in a recognizable way (i.e. with a message ID),
after all, this is of major importance.
|
|
This way the difference between lookups via NSS and our native bus API should become minimal.
|
|
When we synthesize A/AAAA for domains like "localhost", then make sure we generate ENODATA if the user asks for RR
types such a RP to be solved on the name. Previously, we'd pass the error back in that case that was generated from the
usual lookup procedure.
|
|
The LLMNR spec suggests to do do reverse address lookups by doing direct LLMNR/TCP connections to the indicated
address, instead of doing any LLMNR multicast queries. When we do this and the peer doesn't actually implement LLMNR
this will result in a TCP connection error, which we need to handle. In contrast to most LLMNR lookups this will give
us a quick response on whether we can find a suitable name. Report this as new transaction state, since this should
mostly be treated like an NXDOMAIN rcode, except that it's not one.
|
|
Assign errno-style errors to a variable called "r" when they happen, the same way we do this in most other calls. It's
bad enough that the error handling part of the function deals with two different error variables (pam_code and r) now,
but before this fix it was even three!
|
|
Since we honour the edns rcode extension we need more than 4 bits to format it. To avoid further confusion, derive the
right length from the type.
|
|
Link up more stuff on the GitHub landing page.
|
|
github links up CONTRIBUTING.md if it exists from the issue/PR filing form. Let's add one, in the hope that people have
a look before filing a PR.
|
|
Since we moved to github the commits ML is basically dead, hence don't advertise it anymore.
|
|
In the .vimrc and .dir-locals.el we suggest a line width of 119. We should recommend the same in CODING_STYLE.
|
|
Now that we count both negative and positive validation results, we shouldn't claim we just counted RRsets.
|
|
Also, don't consider RRs that aren't primary to the lookups we do as relevant to the lookups.
|
|
When using NSEC/NSEC3 RRs from the cache to derive existance of arbitrary RRs, we should not get confused by the fact
that NSEC/NSEC3 RRs exist twice at zone cuts: once in the parent zone, and once in the child zone. For most RR types we
should only consult the latter since that's where the beef is. However, for DS lookups we have to check the former.
This change makes sure we never cache NSEC/NSEC3 RRs from any parent zone of a zone-cut. It also makes sure that when
we look for a DS RR in the cache we never consider any cached NSEC RR, as those are now always from the child zone.
|
|
an invalid packet event
|
|
We already maintain statistics about positive DNSSEC proofs, and count them up by 1 for each validated RRset. Now,
update the same counters each time we validated a negative query, so that the statistics are the combined result of all
validation checks, both positive and negative.
|
|
match, or just a covering enclosure
If we are looking for a DS RR we need to check the NSEC3 bitmap of the parent zone's NSEC3 RR, not the one from the
child. For any other RR we need to look at the child's however, hence enforce this with the bitmaps.
Note that not coverign checks only the lower zone's NSEC3 bitmaps matter, hence the existing check is fine.
|
|
|
|
This also links up the new manpage from systemd-resolved.service(8), and makes a couple of unrelated additions.
|
|
We configure the parameters we use for the docbook XML.
|
|
The tool resolves way more than just hosts, hence give it a more generic name. This should be safe, as the tool is
currently undocumented. Before we add documentation for it, let's get the name right.
This also moves the C source into src/resolve/ (from src/resolve-host/), since the old name is a misnomer now. Also,
since it links directly to many of the C files of resolved it really belongs into resolved's directory anyway.
|
|
DNS_ANSWER_FOREACH() can deal with NULL answers anyway, let's simplify our code here.
|
|
Also, while we are at it, set the "authenticated" bit for everything we synthesize
|
|
|
|
the network is down
|
|
This mimics what networkd is doing to detect a carrier.
|
|
Noticed by @vcaputo
|
|
Fixes #2380.
|
|
Issue #2388 suggests the current TasksMax= setting for user processes is to low. Bump it to 12K. Also, bump the
container TasksMax= from 8K to 16K, so that it remains higher than the one for user processes.
(Compare: the kernel default limit for processes system-wide is 32K).
Fixes #2388
|
|
state
Previously we have return the not-found code, in the case that we found a
unit which does not belong to set active (resp. failed), which is the
opposite than what is written in man page.
|
|
nspawn: fix memory leak
|
|
|
|
ZJS: remove unnecessary oom check after strdupa().
|
|
udevd: do not clean up fds in main
|
|
This commit fixes the following broken --getter option:
when systemd-journal-remote is called with --getter option,
it causes the error meesage "Zero sources specified" and
the getter command will not be called.
|
|
|
|
When --url option is specified, e.g. --url='http://some.host:19531/entries'
retrieved remote journal entries will be stored to
/var/log/journal/remote/remote-some.host.journal
|
