| Age | Commit message (Collapse) | Author |
|---|
|
Let's get rid of is_clean_exit_lsb(), let's move the logic for the special
handling of the two LSB exit codes into the sysv-generator by writing out
appropriate SuccessExitStatus= lines if the LSB header exists. This is not only
semantically more correct, bug also fixes a bug as the code in service.c that
chose between is_clean_exit_lsb() and is_clean_exit() based this check on
whether a native unit files was available for the unit. However, that check was
bogus since a long time, since the SysV generator was introduced and native
SysV script support was removed from PID 1, as in that case a unit file always
existed.
|
|
|
|
Let's make sure it's in the same order as the actual enum defining the exit
statuses.
|
|
Do not make up our own type for ExitStatus, but use the type used by POSIX for
this, which is "int". In particular as we never used that type outside of the
definition of exit_status_to_string() where we internally cast the paramter to
(int) every single time we used it.
Hence, let's simplify things, drop the type and use the kernel type directly.
|
|
|
|
|
|
nspawn --private-users parsing, v2
|
|
errno (#4328)
as @poettering suggested in the #4320
|
|
Autodetect systemd version in containers started by systemd-nspawn
|
|
In particular, the check for arg_uid_range <= 0 is moved to the end, so that
"foobar:0" gives "Failed to parse UID", and not "UID range cannot be 0.".
|
|
This is like the previous reverted commit, but any boolean is still accepted,
not just "yes" and "no". Man page is adjusted to match the code.
|
|
This reverts commit bfd292ec35c7b768f9fb5cff4d921f3133e62b19.
|
|
It is impossible to ship a fully generic PAM configuration upstream.
Therefore, ship a minimal configuration with the systemd --user requirements,
and add a note to DISTRO_PORTING documenting this.
Fixes #4284
|
|
console-shell.service was supposed to be useful for normal clean boots
(i.e. multi-user.target or so), as a replacement for logind/getty@.service for
simpler use cases.
But due to the lack of documentation and sanity check one can easily be
confused and enable this service in // with getty@.service.
In this case we end up with both services sharing the same tty which ends up in
strange results.
Even worse, console-shell.service might be failing while getty@.service tries
to acquire the terminal which ends up in the system to poweroff since
console-shell.service uses:
"ExecStopPost=-/usr/bin/systemctl poweroff".
Another issue: this service doesn't work well if plymouth is also used since it
lets the splash screen program run and mess the tty (at least a "plymouth quit"
is missing).
So let's kill it for now.
|
|
A fix to get resolved to start in userns
|
|
systemd fills arg_default_unit during startup with default.target
value. But arg_default_unit may be overwritten in parse_argv() or
parse_proc_cmdline_item().
Let's check value of arg_default_unit after calls of parse_argv()
and parse_proc_cmdline_item() and fill it with default.target if
it wasn't filled before. In this way we will not spend unnecessary
time to for filling arg_default_unit with default.target.
|
|
The make_null_stdio() may fail. Let's check its result and print
warning message instead of keeping silence.
|
|
When running in a user namespace without private networking, resolved would
fail to start. There isn't much difference between EADDRINUSE and EPERM,
so treat them the same, except for the warning message text.
|
|
Make sure an error is always printed… When systemd-resolved is started in a
user namespace without private network, it would fail on setsockopt, but the
error wouldn't be particularly informative:
"Failed to start manager: permission denied."
|
|
Nspawn arguments parsing and man page update
|
|
According to TCG EFI Protocol Specification for TPM 2.0 family,
all events generated after the invocation of EFI_TCG2_GET_EVENT_LOG
shall be stored in an instance of an EFI_CONFIGURATION_TABLE aka
EFI TCG 2.0 final events table. Hence, it is necessary to trigger the
internal switch through calling get_event_log() in order to allow
to retrieve the logs from OS runtime.
msekletar:
> I've looked at EDK2 and indeed log entry is added to FinalEventsTable only after
> EFI_TCG2_PROTOCOL.GetEventLog was called[1][2]. Also, same patch was currently
> merged to shim by Peter Jones [3].
[1] https://github.com/tianocore/edk2/blob/master/SecurityPkg/Tcg/Tcg2Dxe/Tcg2Dxe.c#L698
[2] https://github.com/tianocore/edk2/blob/master/SecurityPkg/Tcg/Tcg2Dxe/Tcg2Dxe.c#L824
[3] rhinstaller/shim#64
|
|
Now that systemd-nspawn@.service includes -U, more users might be interested
in this tidbit ;)
|
|
The documentation says lists "yes", "no", "pick", and numeric arguments.
But parse_boolean was attempted first, so various numeric arguments were
misinterpreted.
In particular, this fixes --private-users=0 to mean the same thing as
--private-users=0:65536.
While at it, use strndupa to avoid some error handling.
Also give a better error for an empty UID range. I think it's likely that
people will use --private-users=0:0 thinking that the argument means UID:GID.
|
|
|
|
Current systemd version detection routine cannot detect systemd 230,
only systmed >= 231. This means that we'll still use the legacy hierarchy
in some cases where we wouldn't have too. If somebody figures out a nice
way to detect systemd 230 this can be later improved.
|
|
as its output is fairly long.
|
|
systemd-soon-to-be-released-232 is able to deal with the mixed hierarchy.
So make an educated guess, and use the mixed hierarchy in that case.
Tested by running the host with mixed hierarchy (i.e. simply using a recent
kernel with systemd from git), and booting first a container with older systemd,
and then one with a newer systemd.
Fixes #4008.
|
|
|
|
The new function has 416 lines by itself!
"return log_error_errno" is used to nicely reduce the volume of error
handling code.
A few minor issues are fixed on the way:
- positive value was used as error value (EIO), causing systemd-nspawn
to return success, even though it shouldn't.
- In two places random values were used as error status, when the
actual value was in an unusual place (etc_password_lock, notify_socket).
Those are the only functional changes.
There is another potential issue, which is marked with a comment, and left
unresolved: the container can also return 133 by itself, causing a spurious
reboot.
|
|
If we are going to use the env var to override the detection result
anyway, there is not point in doing the detection, especially that
it can fail.
|
|
This is a bit crude and only works for new systemd versions which
have libsystemd-shared.
|
|
|
|
This patch enables to configure
IFA_F_HOMEADDRESS
IFA_F_NODAD
IFA_F_MANAGETEMPADDR
IFA_F_NOPREFIXROUTE
IFA_F_MCAUTOJOIN
|
|
resolved: add an option to disable the stub resolver
|
|
|
|
3 minor improvements for notification message handling
|
|
|
|
This patch adds support to remote checksum checksum offload to VXLAN.
This patch adds RemoteCheckSumTx and RemoteCheckSumRx vxlan configuration
to enable remote checksum offload for transmit and receive on the VXLAN tunnel.
|
|
RISC-V is an open source ISA in development since 2010 at UCB.
For more information, see https://riscv.org/
I am adding RISC-V support to Fedora:
https://fedoraproject.org/wiki/Architectures/RISC-V
There are three major variants of the architecture (32-, 64- and
128-bit). The 128-bit variant is a paper exercise, but the other
two really exist in silicon. RISC-V is always little endian.
On Linux, the default kernel uname(2) can return "riscv" for all
variants. However a patch was added recently which makes the kernel
return one of "riscv32" or "riscv64" (or in future "riscv128"). So
systemd should be prepared to handle any of "riscv", "riscv32" or
"riscv64" (in future, "riscv128" but that is not included in the
current patch). If the kernel returns "riscv" then you need to use
the pointer size in order to know the real variant.
The Fedora/RISC-V kernel only ever returns "riscv64" since we're
only doing Fedora for 64 bit at the moment, and we've patched the
kernel so it doesn't return "riscv".
As well as the major bitsize variants, there are also architecture
extensions. However I'm trying to ensure that uname(2) does *not*
return any other information about those in utsname.machine, so that
we don't end up with "riscv64abcde" nonsense. Instead those
extensions will be exposed in /proc/cpuinfo similar to how flags
work in x86.
|
|
Let's not accept datagrams with embedded NUL bytes. Previously we'd simply
ignore everything after the first NUL byte. But given that sending us that is
pretty ugly let's instead complain and refuse.
With this change we'll only accept messages that have exactly zero or one NUL
bytes at the very end of the datagram.
|
|
large ones
Let's make the kernel let us know the full, original datagram size of the
incoming message. If it's larger than the buffer space provided by us, drop the
whole message with a warning.
Before this change the kernel would truncate the message for us to the buffer
space provided, and we'd not complain about this, and simply process the
incomplete message as far as it made sense.
|
|
process
If the kernel doesn't permit us to dequeue/process an incoming notification
datagram message it's still better to stop processing the notification messages
altogether than to enter a busy loop where we keep getting notified but can't
do a thing about it.
With this change, manager_dispatch_notify_fd() behaviour is changed like this:
- if an error indicating a spurious wake-up is seen on recvmsg(), ignore it
(EAGAIN/EINTR)
- if any other error is seen on recvmsg() propagate it, thus disabling
processing of further wakeups
- if any error is seen on later code in the function, warn about it but do not
propagate it, as in this cas we're not going to busy loop as the offending
message is already dequeued.
|
|
Various mkosi bits
|
|
For some certification, it should not be possible to reboot the machine through ctrl-alt-delete. Currently we suggest our customers to mask the ctrl-alt-delete target, but that is obviously not enough.
Patching the keymaps to disable that is really not a way to go for them, because the settings need to be easily checked by some SCAP tools.
|
|
ioctl socket fixes, sd-bus error updates, resolved error addition, PAM stub process priv fix
|
|
Let's drop the caching of the setgroups /proc field for now. While there's a
strict regime in place when it changes states, let's better not cache it since
we cannot really be sure we follow that regime correctly.
More importantly however, this is not in performance sensitive code, and
there's no indication the cache is really beneficial, hence let's drop the
caching and make things a bit simpler.
Also, while we are at it, rework the error handling a bit, and always return
negative errno-style error codes, following our usual coding style. This has
the benefit that we can sensible hanld read_one_line_file() errors, without
having to updat errno explicitly.
|
|
gcc at some optimization levels thinks thes variables were used without
initialization. it's wrong, but let's make the message go anyway.
|
|
In the process execution code of PID 1, before
096424d1230e0a0339735c51b43949809e972430 the GID settings where changed before
invoking PAM, and the UID settings after. After the change both changes are
made after the PAM session hooks are run. When invoking PAM we fork once, and
leave a stub process around which will invoke the PAM session end hooks when
the session goes away. This code previously was dropping the remaining privs
(which were precisely the UID). Fix this code to do this correctly again, by
really dropping them else (i.e. the GID as well).
While we are at it, also fix error logging of this code.
Fixes: #4238
|
|
We generate these, hence we should also add errno translations for them.
|
|
Add this new error code (documented in RFC7873) to our list of known errors.
|
