Age | Commit message (Collapse) | Author |
|
define HEXDIGITS alongside DIGITS, and use it where it's already useful. We'll
use it again shortly when parsing MAC addresses.
|
|
networkd currently silently accepts some strings as MAC addresses that it
probably shouldn't (like "ab:cd:ef:12:34:56:78" and "ab:cd:ef:12:3 4:56").
Add tests to MAC address parsing to ensure that we only accept valid MAC
addresses, and that we accept the three most common forms of MAC address
(colon-delimited hex, IEEE, and Cisco)
Several of these tests currently fail, but another commit in this series will
resolve them.
|
|
Improve the networkd documentation to clarify that Match.MACAddress is for
selection, but Link.MACAddress describes an action to be taken.
|
|
|
|
|
|
Small networkd cleanup
|
|
|
|
BlockIOXyz= to the legacy hierarchy
With this change for each setting we say which hierarachy it applies to briefly
in the first sentence of the description, plus in longer form in an extra
pargraph at the end, with a recommendation for the counterpart of the option in
the other hierarchy.
Also adds markup and the "=" suffix to all mentioned settings.
|
|
|
|
core: add io controller support on the unified hierarchy
|
|
|
|
|
|
We currently generate log message about unit being started even when
unit was started already and job didn't do anything. This is because job
was requested explicitly and hence became anchor job of the transaction
thus we could not eliminate it. That is fine but, let's not pollute
journal with useless log messages.
$ systemctl start systemd-resolved
$ systemctl start systemd-resolved
$ systemctl start systemd-resolved
Current state:
$ journalctl -u systemd-resolved | grep Started
May 05 15:31:42 rawhide systemd[1]: Started Network Name Resolution.
May 05 15:31:59 rawhide systemd[1]: Started Network Name Resolution.
May 05 15:32:01 rawhide systemd[1]: Started Network Name Resolution.
After patch applied:
$ journalctl -u systemd-resolved | grep Started
May 05 16:42:12 rawhide systemd[1]: Started Network Name Resolution.
Fixes #1723
|
|
|
|
More friendly to the stack.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=95231
|
|
Private /dev will not be managed by udev or others, so we can make it
noexec and readonly after we have made all device nodes. As /dev/shm
needs to be writable, we can't use bind_remount_recursive().
|
|
|
|
|
|
|
|
Also adjust indentation in various places.
|
|
While creating a VLAN the mac address should be copied from the parent interface, so that
the VLANs inherit the MAC address of the physical interface.
Before:
```
3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
...
6: vlan1@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 22:07:73:9d:43:59 brd ff:ff:ff:ff:ff:ff
7: vlan2@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 46:30:76:33:35:d4 brd ff:ff:ff:ff:ff:ff
```
After:
```
3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
...
11: vlan1@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
12: vlan2@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
```
v2 of #1573, with fixed commit message.
|
|
This patch implements support for the IFLA_BR_MCAST_SNOOPING attribute
it can change the multicast snooping value.
IGMP snooping monitors the Internet Group Management Protocol (IGMP)
traffic between hosts and multicast routers.
|
|
|
|
It is just an alias for route_free which requires that route is not null,
but it was only used in one place where it was checked that route is not
null anyway. Let's just call route_free instead.
|
|
This is now the recommended way to do monitoring by upstream D-Bus.
It's also allowed in the default policy, whereas eavesdrop is not
anymore, which effectively broke busctl on many systems.
|
|
unit_set_slice() fails with -EBUSY if the unit already has a slice associated
with it. This makes it impossible to override slice through dropin config or
over dbus. There's no reason to disallow slice changes as long as cgroups
aren't realized. Fix it.
Fixes #3240.
Signed-off-by: Tejun Heo <htejun@fb.com>
Reported-by: Davide Cavalca <dcavalca@fb.com>
|
|
Bulgarian translation of systemd
|
|
Drop all dangling old /dev mounts before mounting a new private /dev tree.
|
|
|
|
|
|
|
|
|
|
This new method returns information by unit names. Instead of ListUnitsByPatterns
this method returns information of inactive and even unexisting units.
Moved dbus unit reply logic into a separate shared function.
Resolves https://github.com/coreos/fleet/pull/1418
|
|
Add a synchronization point so that custom initramfs units can run
after the root device becomes available, before it is fsck'd and
mounted.
This is useful for custom initramfs units that may modify the
root disk partition table, where the root device is not known in
advance (it's dynamically selected by the generators).
|
|
Desktop environments can keep this property up to date to allow
applications to easily track session's Lock status.
|
|
We need to be sure that the size returned here actually matches what we will read with recvmsg() next
Fixes #2984
|
|
Fix "preset-all" with dangling symlinks and install-section hint emitted too eagerly
|
|
The nfs mount option bg will not be supported with systemd.
Reasons are discussed here:
https://github.com/systemd/systemd/pull/3169
|
|
fsck determines wheter an automatic quotacheck should be executed.
Hence fsck service needs to run before quotacheck service.
|
|
|
|
_const_ means that the caller can assume that the function will return the same
result every time (and will not modify global memory). special_glyph() meets
this: even though it depends on global memory, that part of global memory is
not expected to change. This allows the calls to special_glyph() to be
optimized, even if -flto is not used.
|
|
That function doesn't draw anything on it's own, just returns a string, which
sometimes is more than one character. Also remove "DRAW_" prefix from character
names, TREE_* and ARROW and BLACK_CIRCLE are unambigous on their own, don't
draw anything, and are always used as an argument to special_glyph().
Rename "DASH" to "MDASH", as there's more than one type of dash.
|
|
It's quite a bit shorter and just as readable.
(The full sentence with "pointing to" was added to replace a text that used
"ln -s %s %s". Using the "ln" syntax is indeed unclear, because it's not
obvious which is the source and which is the target, and because symlink(2)
uses the opposite order to ln(1). But with the unicode arrow there should
be no ambiguity.)
|
|
Executing 'systemctl enable' on the same unit twice would cause
a warning about a missing [Install] section to be printed. To avoid
this, count all symlinks that "would" be created, and return 1
no matter if we actually created a symlink or skipped creation because
it already exists.
|
|
This fixes 'preset-all' with a unit that is a dangling symlink.
$ systemctl --root=/ preset-all
Unit syslog.service is an alias to a unit that is not present, ignoring.
Unit auditd.service is masked, ignoring.
Unit NetworkManager.service is masked, ignoring.
|
|
$ systemctl --root=/ preset foobar.service
Cannot find unit foobar.service.
Failed to preset: No such file or directory.
$ systemctl --root=/ preset foobar@.service
Cannot find unit foobar@.service.
Failed to preset: No such file or directory.
$ systemctl --root=/ preset foobar@blah.service
Cannot find unit foobar@blah.service or foobar@.service.
Failed to preset: No such file or directory.
|
|
introduce simple "network zones" concept to nspawn
|
|
|
|
Let's make sure we don't remove veth links that existed before nspawn was
invoked.
https://github.com/systemd/systemd/pull/3209#discussion_r62439999
|