summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-07-24time-util: add clock_boottime_or_monotonicTom Gundersen
CLOCK_BOOTTIME is not supported by timerfd on older kernels, so for the time beeing, use this helper instead which will fallback to CLOCK_MONOTONIC if CLOCK_BOOTTIME is not supported.
2014-07-24sd-event: add support for CLOCK_BOOTTIMETom Gundersen
This requires a very recent kernel (3.15), so care should be taken when using this functionality.
2014-07-23sd-network: expose DNS/NTP servers as stringsTom Gundersen
This avoids having to distinguish between IPv4 and IPv6, allowing us to keep their internal orderings. The consumers now has to turn the strings into addresses.
2014-07-23resolved: don't read DHCP leasesTom Gundersen
networkd will expose both statically configured DNS servers and servers receieved over DHCP in sd_network_get_dns(), so no need to keep the distinction in resolved.
2014-07-23networkd: merge DNS and NTP entries when exportingTom Gundersen
In the state files, do not distinguish where the various entries came from (static or DHCP), but include them all in the same list.
2014-07-23man: fix path for system-sleep hook directoryMichael Biebl
2014-07-23docs: remove repeating words from man/*xmlKarel Zak
2014-07-23dhcp-network: remove unused DHCP6_STATE_RSDan Williams
Probably a left-over from when router solicitations were requested in the DHCP6 code. But since they are now separate, this state is no longer needed.
2014-07-23networkd: set route protocolDan Williams
All routes added by networkd are currently set RTPROT_BOOT, which according to the kernel means "Route installed during boot" (rtnetlink.h). But this is not always the case as networkd changes routing after boot too. Since the kernel gives more detailed protocols, use them. With this patch, user-configured static routes now use RTPROT_STATIC (which they are) and DHCP routes use RTPROT_DHCP. There is no define for IPv4LL yet, so those are installed as RTPROT_STATIC (though perhaps RTPROT_RA is better?). [tomegun: fixup src/network/networkd-link.c:972:33: error: too few arguments to function 'route_new_dynamic']
2014-07-23update TODOLennart Poettering
2014-07-23resolved: most DNS servers can't handle more than one question per packet, ↵Lennart Poettering
hence let's not generate that
2014-07-23resolved: implement negative cachingLennart Poettering
2014-07-23resolved: rework logic so that we can share transactions between queries of ↵Lennart Poettering
different clients
2014-07-23nss-myhostname: don't include assert.h twiceLennart Poettering
2014-07-21man: merge systemd-verify with systemd-analyzeZbigniew Jędrzejewski-Szmek
2014-07-21shell-completion: systemd-analyze verify, systemctl linkZbigniew Jędrzejewski-Szmek
Some zsh completion helpers were not installed, so completion was broken. Add systemd-analyze verify. Make systemctl link complete only unit names.
2014-07-21Merge systemd-verify with systemd-analyzeZbigniew Jędrzejewski-Szmek
2014-07-21configure: add -Wno-typedef-redefinitionZbigniew Jędrzejewski-Szmek
Message-ID: <CAJ+BJsz9Qy-JU25dUuGT2n0LMNzcOpoJNGNtbf_boSuT_6hONw@mail.gmail.com>
2014-07-21Add IFLA_VTI defines to missing.hJean-André Santoni
2014-07-21update-done: set proper selinux context for .updatedZbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1121806
2014-07-21sysusers: fix selinux context of backup filesZbigniew Jędrzejewski-Szmek
Also, fix fopen_temporary_label to set proper context. By chance, all users so far used the same context, so the error didn't matter. Also, check return value from label_init(). https://bugzilla.redhat.com/show_bug.cgi?id=1121806
2014-07-21networkd: bridge - use USEC_PER_MSEC macrosTom Gundersen
Lennart said: > We have these nice USEC_PER_MSEC-style macro definitions which make it a > little bit clearer what we are converting here from what into > what... please use that instead of writing "1000"... > > (we stole those from gstreamer btw)
2014-07-21networkd: add support for bond optionsSusant Sahani
The following bond options are supported by this patch. MIIMonitorSec: Specifies the frequency in milli-seconds that MII link monitoring will occur. UpDelaySec: Specifies the delay time in milli-seconds to enable a link after a link up status has been detected. DownDelaySec: Specifies the delay time in milli-seconds to disable a link after a link failure has been detected. changes: 1. Added gconf variables. 2. man page conf: [NetDev] Name=bond1 Kind=bond [Bond] Mode=802.3ad TransmitHashPolicy=layer2+3 LacpduTransmitRate=fast MIIMonitorSec=1s UpDelaySec=2s DownDelaySec=8s cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2+3 (2) MII Status: up MII Polling Interval (ms): 1000 Up Delay (ms): 2000 Down Delay (ms): 8000 802.3ad info LACP rate: fast Min links: 0 Aggregator selection policy (ad_select): stable bond bond1 has no active aggregator [tomegun: rephrased manpage, dropped bond_ prefix from variables]
2014-07-21networkd: bond add support for lacp rateSusant Sahani
LacpduTransmitRate option specifies the rate in which link partner to transmit LACPDU packets in 802.3ad mode. Possible values slow : Request partner to transmit LACPDUs every 30 seconds fast : Request partner to transmit LACPDUs every 1 second The default is slow. chages: 1. Added enum bond_lacp_rate_table 2. gperf LacpduTransmitRate Test: conf file: [NetDev] Name=bond1 Kind=bond [Bond] Mode=802.3ad LacpduTransmitRate=fast test: cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2+3 (2) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: fast Min links: 0 Aggregator selection policy (ad_select): stable bond bond1 has no active aggregator [tomegun: renamed from LacpduTransmitRate to LACPTransmitRate, manpage fixes and dropped bond_ prefix from variables]
2014-07-21networkd: add support for bond transmit hash policySusant Sahani
This patch adds support the transmit hash policy to use for slave selection in balance-xor, 802.3ad, and tlb modes layer2, layer3+4, layer2+3, encap3+4, encap3+4 Added: 1. BondXmitHashPolicy 2. conf param TransmitHashPolicy Test conf: [NetDev] Name=bond1 Kind=bond [Bond] Mode=802.3ad TransmitHashPolicy=layer2+3 test output: cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2+3 (2) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Min links: 0 Aggregator selection policy (ad_select): stable bond bond1 has no active aggregator [tomegun: dropped bond_ prefix from new Bond variable, drop repeated man-page section]
2014-07-21sd-rtnl: uncomment bond rtnl constantsSusant Sahani
2014-07-21networkd: netdev - split NetDev struct into per-kind structsTom Gundersen
Similarly to how unit types work.
2014-07-21sd-network: drop get_ifindicesTom Gundersen
People should use rtnl for this, and then only query sd-network by the ifindices it finds.
2014-07-20man: add systemd-verify(1)Zbigniew Jędrzejewski-Szmek
2014-07-20systemd-verify: check man pagesZbigniew Jędrzejewski-Szmek
2014-07-20systemd-verify: a simple tool for offline unit verificationZbigniew Jędrzejewski-Szmek
This tool will warn about misspelt directives, unknown sections, and non-executable commands. It will also catch the common mistake of using Accept=yes with a non-template unit and vice versa. https://bugs.freedesktop.org/show_bug.cgi?id=56607
2014-07-20path-lookup: make SYSTEMD_UNIT_PATH more flexibleZbigniew Jędrzejewski-Szmek
It can now contain more than one directory, and can be used to only prepend, not totally override, the normal load path.
2014-07-20test-cgroup-mask: fix masks in test and enable by defaultZbigniew Jędrzejewski-Szmek
Commit 637f421e5c6a ("cgroups: always propagate controller membership to siblings") changed the mask propagation logic, but the test wasn't updated. Move to normal tests from manual tests, it should not touch the system anymore.
2014-07-20test-cgroup-mask: pass on kernels without memory controllerZbigniew Jędrzejewski-Szmek
It seems that unit_get_siblings_mask returns the controllers filtered by what is available, but get_members_mask and get_cgroup_mask do not. This just fixes the test following the symptoms.
2014-07-20systemd: return the first error from manager_startup()Zbigniew Jędrzejewski-Szmek
2014-07-20test-engine: fix access to unit load pathZbigniew Jędrzejewski-Szmek
Also add a bit of debugging output to help diagnose problems, add missing units, and simplify cppflags. Move test-engine to normal tests from manual tests, it should now work without destroying the system.
2014-07-20Add quotes to warning messageZbigniew Jędrzejewski-Szmek
The message for SYSTEMD_LOG_LEVEL= looked a bit strange.
2014-07-20systemd: use pager for --test and --helpZbigniew Jędrzejewski-Szmek
2014-07-19journalctl,man: allow + only between termsZbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1110712
2014-07-19bash-completion: -p option for journalctlZbigniew Jędrzejewski-Szmek
2014-07-19install: systemd-timesyncd.service is enabled by sysinit.targetMichael Olbrich
systemd-timesyncd.service has a "WantedBy=sysinit.target" so the initially generated link should match that.
2014-07-19core: remove systemd_running_as lookup functionsZbigniew Jędrzejewski-Szmek
They are unused and unlikely to ever be.
2014-07-19escape: fix return codeZbigniew Jędrzejewski-Szmek
2014-07-19barrier: suppress false-positive warningDavid Herrmann
If poll() returns, one of both revents must be set, thus "buf" is set by either clause. This is non-obvious for code-checkers so add an "else continue;" clause to suppress "uninitialized variable" warnings.
2014-07-18core: show timeouts when watchdog howlsZbigniew Jędrzejewski-Szmek
2014-07-18Small modernizationsZbigniew Jędrzejewski-Szmek
2014-07-18Be more verbose when bind or listen failsZbigniew Jędrzejewski-Szmek
Also be more verbose in devnode_acl_all().
2014-07-18Nuke update-kbd-mapZbigniew Jędrzejewski-Szmek
Our version has evolved independently of the original table in systemd-config-keyboard, so it cannot be ever regenerated from original upstream. Remove script to avoid confusion.
2014-07-18Makefile.am: tweaks to python commandsZbigniew Jędrzejewski-Szmek
2014-07-18machinectl: make sure we are not reading an unitialized variableZbigniew Jędrzejewski-Szmek
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-12-23 06:39:18 +0000