| Age | Commit message (Collapse) | Author |
|---|
|
Device name is PixArt, but it's sold as a HP brand.
https://bugs.freedesktop.org/show_bug.cgi?id=90142
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
The atmel driver sets a default resolution of 20 for each touchpads it
creates. On this model, 10 is more appropriate.
The resolution is not set for the touchscreen by the kernel, so match
the name to both touchpad and touchscreen.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
The Lenovo X230 advertize a vertical resolution of 136, which gives a true
size of 31 mm. The actual physical size of the touchpad is 40 mm, so
override the resolution to 100.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
The pointingstick of the Dell Latitude E6400 is somewhat slow by default,
whereas the pointingstick of the Dell Latitude D620 is much too fast by
default, set POINTINGSTICK_CONST_ACCEL for both of them to adjust for this.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Lenovo has changed the sensitivity of the trackpoint on the x240 / T440s / T540
generation of Thinkpads, making them somewhat insensitive by default, add a
hwdb entry to tweak the sensitivity setting.
The ThinkPad X200s is way way too slow by default and unless you push the
trackpoint quite hard only sends delta events in the 1-2 range, tweak the
sensitivity to make it send a wider range of deltas and apply a const accel
factor to make it have a more reasonable speed by default.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
IBM / Lenovo trackpoints allow specifying a sensitivity setting through a
ps/2 command, which changes the range of the deltas sent when using the
trackpoint.
On some models with normal usage only deltas of 1 or 2 are send, resulting in
there only being 2 mouse cursor movement speeds, rather than the expected fluid
scale. Changing the sensitivity to a higher level than the bootup default fixes
this.
This commit adds support for setting a POINTINGSTICK_SENSITIVITY value
in hwdb to allow changing the sensitivity on boot through udev / hwdb.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
There is quite a wide spread in the delta events generated by pointingsticks,
some generate deltas of 1-2 under normal use, while others generate deltas
from 1-20.
This commit adds a hwdb file which allows specifying a per model
POINTINGSTICK_CONST_ACCEL value which can be used by the userspace input stack
to normalize the deltas so that all pointingsticks get the same feeling ootb.
The hwdb matching re-uses the existing 60-evdev.rules.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
It does not generate a release event.
https://launchpad.net/bugs/1441849
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
\U unicode literals
We simply recode them in utf8.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
There's no reason to eat up ENOENT, it should be OK to simply report the
error back.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
mount point
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
We _always_ return NULL from destructors to allow direct assignments to
the variable holding the object. Especially on hashmaps, which treat NULL
as empty hashmap, this is pretty neat.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
All callers look at the return value anyway.
|
|
We always return NULL/invalid-object from destructors, fix strv_free() to
do the same.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
|
|
- No need to add "Error, " prefix, we already have that as metadata.
- Also use double quotes for path names, as in most other places.
- Remove stray newline at end of message.
- Downgrade error messages after which we continue to warnings.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
udev uses inotify to implement a scheme where when the user closes
a writable device node, a change uevent is forcefully generated.
In the case of block devices, it actually requests a partition rescan.
This currently can't be synchronized with "udevadm settle", i.e. this
is not reliable in a script:
sfdisk --change-id /dev/sda 1 81
udevadm settle
mount /dev/sda1 /foo
The settle call doesn't synchronize there, so at the same time we try
to mount the device, udevd is busy removing the partition device nodes and
readding them again. The mount call often happens in that moment where the
partition node has been removed but not readded yet.
This exact issue was fixed long ago:
http://git.kernel.org/cgit/linux/hotplug/udev.git/commit/?id=bb38678e3ccc02bcd970ccde3d8166a40edf92d3
but that fix is no longer valid now that sequence numbers are no longer
used.
Fix this by forcing another mainloop iteration after handling inotify events
before unblocking settle. If the inotify event caused us to generate a
"change" event, we'll pick that up in the following loop iteration, before
we reach the end of the loop where we respond to settle's control message,
unblocking it.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Commit 9ea28c55a2 (udev: remove seqnum API and all assumptions about
seqnums) introduced a regresion, ignoring the timeout option when
waiting until the event queue is empty.
Previously, if the udev event queue was not empty when the timeout was
expired, udevadm settle was returning with exit code 1. To check if the
queue is empty, you could invoke udevadm settle with timeout=0. This
patch restores the previous behavior.
(David: fixed timeout==0 handling and dropped redundant assignment)
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
This adds support for the keyboard illumination keys and fixes
Fn+F1.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Verified for the 5,1 Macbook, the others are guesses based on the list of
supported devices of the moshi trackpad protector.
http://www.moshi.com/trackpad-protector-trackguard-macbook-pro#silver
Resolution calculated based on the min/max settings set in the kernel driver,
divided by the physical size. This is probably slightly off, but still better
than no resolution at all.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Fixup for 51c0c2869845a058268d54c3111d55d0dd485704.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
We only care about whether our direct parent is removable, not whether any
further points up the tree are - the kernel will take care of policy for
those itself. This enables autosuspend on devices where the root hub reports
that its removable state is unknown.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Parse properties in the form
EVDEV_ABS_00="<min>:<max>:<res>:<fuzz>:<flat>"
and apply them to the kernel device. Future processes that open that device
will see the updated EV_ABS range.
This is particularly useful for touchpads that don't provide a resolution in
the kernel driver but can be fixed up through hwdb entries (e.g. bcm5974).
All values in the property are optional, e.g. a string of "::45" is valid to
set the resolution to 45.
The order intentionally orders resolution before fuzz and flat despite it
being the last element in the absinfo struct. The use-case for setting
fuzz/flat is almost non-existent, resolution is probably the most common case
we'll need.
To avoid multiple hwdb invocations for the same device, replace the
hwdb "keyboard:" prefix with "evdev:" and drop the separate 60-keyboard.rules
file. The new 60-evdev.rules is called for all event nodes
anyway, we don't need a separate rules file and second callout to the hwdb
builtin.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
No functional changes, just to make the next patch easier to review
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
No changes in the mapping, but previously we opened the device only on
successful parsing. Now we open the mapping as soon as we have a value that
looks interesting. Since errors are supposed to be the exception, not the
rule, this is probably fine.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Rather than building a map and looping through the map, immediately call the
ioctl when we have a successfully parsed property.
This has a side-effect: before the maximum number of ioctls was limited to the
size of the map (1024), now it is unlimited.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
No point parsing the properties if we can't get the devnode to apply them
later. Plus, this makes future additions easier to slot in.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
|
|
input_id already (tries to) tag accelerometers as such, but this only works
for absolute accelerometers. Recent kernels mark accelerometers through an
input prop. Trust that prop and always tag devices with it with
ID_INPUT_ACCELEROMETER.
Note that detection by the prop bit works the same as the existing detection
and will ensure that no other tags get set on the device.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Also referred to as trackpoint, trackstick. These are marked by recent kernels
through an input prop. Forward that prop as udev property so userspace can
easily determine whether there is a pointing stick present.
These devices were previously marked as ID_INPUT_MOUSE, for backwards
compatibility we keep that in place, the new property is an addition.y
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
The dev_port concept is a bit confusing, expand on the comment a bit.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
I'd argue that having firmware labels for such devices makes
no sense, but they exist, so make sure we handle them as best
as we can.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
In case pci_slot overflows we were truncating pci_path instead.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
also removes this warning:
src/udev/cdrom_id/cdrom_id.c: In function ‘cd_media_info.isra.13’:
src/udev/cdrom_id/cdrom_id.c:612:12: warning: assuming signed overflow
does not occur when assuming that (X + c) >= X is always true
[-Wstrict-overflow]
static int cd_media_info(struct udev *udev, int fd)
^
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
