Age | Commit message (Collapse) | Author |
|
mounts
This introduces remote-fs-setup.target independently of
remote-fs-pre.target. The former is only for pulling things in, the
latter only for ordering.
The new semantics:
remote-fs-setup.target: is pulled in automatically by all remote mounts.
Shall be used to pull in other units that want to run when at least one
remote mount is set up. Is not ordered against the actual mount units,
in order to allow activation of its dependencies even 'a posteriori',
i.e. when a mount is established outside of systemd and is only picked
up by it.
remote-fs-pre.target: needs to be pulled in automatically by the
implementing service, is otherwise not part of the initial transaction.
This is ordered before all remote mount units.
A service that wants to be pulled in and run before all remote mounts
should hence have:
a) WantedBy=remote-fs-setup.target -- so that it is pulled in
b) Wants=remote-fs-pre.target + Before=remote-fs-pre.target -- so that
it is ordered before the mount point, normally.
|
|
This reverts commit 6bde0b3220e95a08cefb70846f73b2cf24b7734a.
We should not pull in remote-fs-pre.target unconditionally. It's
supposed to be pulled in by the implementors of it, rather then its
users.
|
|
|
|
Not that it would matter much, but let's make things a bit more
systematic: early boot services shall order themselves before
sysinit.target, and nothing else.
|
|
|
|
into for boot
|
|
|
|
|
|
|
|
|
|
|
|
This changes the fstab mount option x-initrd-rootfs.mount to
x-initrd.rootfs, in order to only use a single namespace "x-initrd." for
all mount options of the initrd.
|
|
|
|
Add option to force journal sync with fsync. Default timeout is 5min.
Interval configured via SyncIntervalSec option at journal.conf. Synced
journal files will be marked as OFFLINE.
Manual sync can be performed via sending SIGUSR1.
|
|
|
|
Let's say you have two initscripts, A and B:
A contains in its LSB header:
Required-Start: C
and B contains in its LSB header:
Provides: C
When systemd is parsing /etc/rc.d/, depending on the file order, you
can end up with either:
- B is parsed first. An unit "C.service" will be "created" and will be
added as additional name to B.service, with unit_add_name. No bug.
- A is parsed first. An unit "C.service" is created for the
"Required-Start" dependency (it will have no file attached, since
nothing provides this dependency yet). Then B is parsed and when trying
to handle "Provides: C", unit_add_name is called but will fail, because
"C.service" already exists in manager->units. Therefore, a merge should
occur for that case.
|
|
Setting children_max according to RAM leads to too much concurrent I/O.
|
|
The manager already prints "Time has been changed" at level info. It
seems too verbose to print the time change message additionally for
every waiting timer unit.
Downgrade the per-unit message to debug.
|
|
backend
|
|
|
|
hello is sent
This alos gets rid of explicit sd_open_fd() and sd_open_address()
constructors in favour of sd_new() + sd_new_start() where the
negotiation parameters may be set it in between.
|
|
|
|
|
|
This reverts commit f5c88ec1330b61787441156de7d764a140774bd2. It is no
longer necessary, and adds unnecessary magic.
|
|
Setting MaxRetentionSec= caused the kernel log to overflow and the
journal daemon to enter an endless loop.
Logging from the journald main loop gets directed to /dev/kmsg,
which wakes up journald again. We skip the import of this message
by checking for our own PID, but this still causes the main loop
to never go to sleep again because we never stopped logging from
there.
|
|
|
|
With the conversion from pci-db + usb-db to hwdb, the property
got accitentially renamed.
Move the name back to the long established identifier *MODEL*
instead of *PRODUCT*.
$ git grep -l ID_MODEL_FROM_DATABASE
hwdb/20-pci-vendor-model.hwdb
hwdb/20-usb-vendor-model.hwdb
hwdb/ids-update.pl
man/systemd.device.xml
rules/78-sound-card.rules
src/core/device.c
src/cryptsetup/cryptsetup.c
|
|
|
|
static nodes (like /dev/loop-control) are created when systemd-udevd
is started and needed to mount loopback devices. Therefore,
local-fs-pre.target should be only started after systemd-udevd is
started.
|
|
|
|
|
|
While most folks will be using the derivative from user-session-units,
I'm updating this one to reflect some of the fixes and things to note
about user sessions:
- cgroup should be set with "%u" - username instead of %I
- set dbus path with %U explicitly too
- hint to folks that wish to use MEM_CG features in user sessions
- allow unit to be enabled for instances with systemctl enable
|
|
Some code really wants to know whether there was a string list parsed,
so don't take the shortcut here, and always allocate a string list, even
if it is an empty one.
https://bugs.freedesktop.org/show_bug.cgi?id=62558
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=62605
|
|
Otherwise clang at least thinks that both consts apply to char.
|
|
Also remove unused variable.
|
|
src/libsystemd-bus/bus-message.h:41:1: warning: attribute 'packed' is ignored, place it after
"struct" to apply attribute to type declaration [-Wignored-attributes]
|
|
|
|
|
|
Requesites are not supposed to be auto-started afterall, they are just
checks, so don't try to be smarter here than appropriate.
Based on a patch from Michal Schmidt.
|
|
This reverts commit faeffa73a81ab5b59acfadeb571431fb0e42af70.
There isn't really much point in dropping the Conflicts= since shutting
down this service is basically free as it doesn't have anything running.
Also, the patch was incomplete, because shutdown.target was still listed
in Before=.
|
|
Distributions that never shipped upstart do not have
"telinit" in /lib/upstart/..
Defaults to /lib/upstart/telinit so there is no change
for systems existing installs.
|
|
- Reword messages a bit
- Correct check whether EACCES is in the set of errors
- Don't complain if no journal files are found
- allocate Set object for errors lazily since in the best case we don't
need it at all.
- don't consider it an error if /run/log/journal doesn't exist (because
that's the usual case actually, if storage is enabled)
|
|
Some parts of systemd (at least the DBus activation codepath) "reply"
to signals, which of course have the no-reply flag set. We will be
defensive here and still send out a reply if we're passed a signal.
Regression introduced by: c6a818c82035da91e
Reported-by: Mantas Mikulėnas <grawity@gmail.com>
Tested-by: Mantas Mikulėnas <grawity@gmail.com>
|
|
|
|
Previously, it would set all caps, but it should drop them all, anything
else makes little sense.
Also, document that this works as it does, and what to do in order to
assign all caps to the bounding set.
https://bugzilla.redhat.com/show_bug.cgi?id=914705
|
|
|
|
Ensure clients don't overflow usec_t when doing relative time changes.
This is mostly just paranoia and protection against accidents, after all
clients are already authenticated, and they can se the time to any
value they wish anyway, but better be safe than sorry.
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1152187/comments/14
|
|
|
|
|