summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-05-19systemctl: suppress no-[Install] hint when --quiet is used (#3295)Zbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1336960
2016-05-19systemctl: reload configuration when enabling sysv units too (#3297)Franck Bui
After enabling/disabling a unit, the daemon configuration is expected to be unless '--no-reload' option is passed. However this is not done when enabling a sysv units. This can lead to the following scenario: $ cp /etc/init.d/named /etc/init.d/foo $ systemctl enable foo foo.service is not a native service, redirecting to systemd-sysv-install Executing /usr/lib/systemd/systemd-sysv-install enable foo $ systemctl start foo Failed to start foo.service: Unit foo.service failed to load: No such file or directory. This can also be seen after installing a package providing a sysv service: the service can't be started unless 'daemon-reload' is called manually. This shouldn't be needed and this patch will fix this case too since during package installation, the service is expected to be enabled/disabled.
2016-05-19systemctl: restore the no-sync option for legacy halt (#3249)tblume
The sync() call on shutdown had been removed with commit 57371e5829a61e5ee6c9f98404dfc729d6c62608 together with the no-sync option for the shutdown commands. The sync call was restored in commit 4a3ad39957399c4a30fc472a804e72907ecaa4f9 but the no-sync option wasn't re-added. I think we should restore this option at least for the legacy halt command.
2016-05-19Merge pull request #3293 from michaelolbrich/partuuidZbigniew Jędrzejewski-Szmek
rules: add /dev/disk/by-partuuid symlinks also for dos partition tables
2016-05-19rules: add /dev/disk/by-partuuid symlinks also for dos partition tablesUwe Kleine-König
blkid reports PARTUUID values also for partitions that are defined by a dos partitioning scheme. Instead of limiting the partitioning scheme to "gpt or dos" just drop the test for the partitioning scheme and trust blkid to do the right thing.
2016-05-19NEWS: mention SessionsMax, InhibitorsMax, MulticastSnooping...Zbigniew Jędrzejewski-Szmek
... logind SIGHUP support, sd_journal_open_{directory,files}_fd, specifiers in DeviceAllow, "generated" and "trasnient" unit types. Move removed features to the end and cluster features by type.
2016-05-18core/dbus: further simplify branch code (#3283)Jonathan Boulle
free_and_strdup already handles the NULL case for us, so we can remove an extraneous conditional check. As noted in https://github.com/systemd/systemd/pull/3279/files#r63687717
2016-05-17hwdb: run "make hwdb-udate" (#3280)Zbigniew Jędrzejewski-Szmek
2016-05-17networkd: do not update state or IPv6LL address if link is failed or lingeringSusant Sahani
This is partial fix for #2228 and #2977, #3204. bridge-test: netdev ready docker0: Gained IPv6LL wlan0: Gained IPv6LL eth0: Gained IPv6LL Enumeration completed bridge-test: netdev exists, using existing without changing its parameters vboxnet0: IPv6 enabled for interface: Success lo: Configured docker0: Could not drop address: No such process vboxnet0: Gained carrier wlan0: Could not drop address: No such process eth0: Could not drop address: No such process eth0: Could not drop address: No such process eth0: Could not drop address: No such process vboxnet0: Gained IPv6LL vboxnet0: Could not set NDisc route or address: Invalid argument vboxnet0: Failed [New Thread 0x7ffff6505700 (LWP 1111)] [Thread 0x7ffff6505700 (LWP 1111) exited] Assertion 'link->state == LINK_STATE_SETTING_ROUTES' failed at src/network/networkd-link.c:672, function link_enter_configured(). Aborting. Program received signal SIGABRT, Aborted. 0x00007ffff6dc6a98 in raise () from /lib64/libc.so.6 Missing separate debuginfos, use: dnf debuginfo-install iptables-1.4.21-15.fc23.x86_64 libattr-2.4.47-14.fc23.x86_64 libidn-1.32-1.fc23.x86_64 pcre-8.38-7.fc23.x86_64 Debugging (gdb) bt "link->state == LINK_STATE_SETTING_ROUTES", file=0x5555556a34c8 "src/network/networkd-link.c", line=672, func=0x5555556a56d0 <__PRETTY_FUNCTION__.14850> "link_enter_configured") at src/basic/log.c:788 src/network/networkd-link.c:672 src/network/networkd-link.c:720 flags=0 '\000', scope=0 '\000', cinfo=0x7fffffffe020) at src/network/networkd-address.c:344 (rtnl=0x5555556eded0, message=0x55555570ff20, userdata=0x5555556ec590) at src/network/networkd-manager.c:604 m=0x55555570ff20) at src/libsystemd/sd-netlink/sd-netlink.c:365 at src/libsystemd/sd-netlink/sd-netlink.c:395 ret=0x0) at src/libsystemd/sd-netlink/sd-netlink.c:429 revents=1, userdata=0x5555556eded0) at src/libsystemd/sd-netlink/sd-netlink.c:723 src/libsystemd/sd-event/sd-event.c:2268 src/libsystemd/sd-event/sd-event.c:2629 timeout=18446744073709551615) at src/libsystemd/sd-event/sd-event.c:2688 bus=0x5555556eeba0, name=0x55555568a2f5 "org.freedesktop.network1", timeout=30000000, check_idle=0x55555556adb6 <manager_check_idle>, userdata=0x5555556ec590) at src/shared/bus-util.c:134 src/network/networkd-manager.c:1130 src/network/networkd.c:127 (gdb) f 3 src/network/networkd-link.c:672 672 assert(link->state == LINK_STATE_SETTING_ROUTES); (gdb) p link->state $1 = LINK_STATE_FAILED We should not be in this state . even if vboxnet0 failed we went into this state. vboxnet0: Could not set NDisc route or address: Invalid argument vboxnet0: Failed
2016-05-17networkd: add route expiration handler (#3242)Susant Sahani
Fix for #3232.
2016-05-17coredump: Improve man pagesPeter Mattern
2016-05-17networkd: Add EmitRouter= option for DHCP Server (#3251)Clemens Gruber
Add an option to disable appending DHCP option 3 (Router) to the DHCP OFFER and ACK packets. This commit adds the boolean option EmitRouter= for the [DHCPServer] section in .network files. Rationale: On embedded devices, it is very useful to have a DHCP server running on an USB OTG ethernet gadget interface to avoid manual setup on the client PCs, but it should only serve IP addresses, no route(r)s. Otherwise, Windows clients experience network connectivity issues, due to them using the address set in DHCP option 3 as default gateway. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
2016-05-17core/dbus: use free_and_strdup to simplify code (#3279)Jonathan Boulle
Makes it consistent with the other branches here.
2016-05-17hwdb: Update database of Bluetooth company identifiersMarcel Holtmann
2016-05-17vconsole: add log_oom() where appropriateLennart Poettering
2016-05-17Merge pull request #3258 from keszybz/small-networkd-cleanupLennart Poettering
Small networkd cleanup
2016-05-16update NEWSLennart Poettering
2016-05-16man: clarify that IOXyz= only applies to the unified hierarchy, and ↵Lennart Poettering
BlockIOXyz= to the legacy hierarchy With this change for each setting we say which hierarachy it applies to briefly in the first sentence of the description, plus in longer form in an extra pargraph at the end, with a recommendation for the counterpart of the option in the other hierarchy. Also adds markup and the "=" suffix to all mentioned settings.
2016-05-16update TODOLennart Poettering
2016-05-16Merge pull request #3193 from htejun/cgroup-io-controllerLennart Poettering
core: add io controller support on the unified hierarchy
2016-05-16CONTRIBUTING: recommend force-push (#3273)Zbigniew Jędrzejewski-Szmek
2016-05-16basic: Fix incorrect architecture mapping on sparc64. (#3274)John Paul Adrian Glaubitz
2016-05-16core: don't log job status message in case job was effectively NOP (#3199)Michal Sekletar
We currently generate log message about unit being started even when unit was started already and job didn't do anything. This is because job was requested explicitly and hence became anchor job of the transaction thus we could not eliminate it. That is fine but, let's not pollute journal with useless log messages. $ systemctl start systemd-resolved $ systemctl start systemd-resolved $ systemctl start systemd-resolved Current state: $ journalctl -u systemd-resolved | grep Started May 05 15:31:42 rawhide systemd[1]: Started Network Name Resolution. May 05 15:31:59 rawhide systemd[1]: Started Network Name Resolution. May 05 15:32:01 rawhide systemd[1]: Started Network Name Resolution. After patch applied: $ journalctl -u systemd-resolved | grep Started May 05 16:42:12 rawhide systemd[1]: Started Network Name Resolution. Fixes #1723
2016-05-16missing.h: add BTRFS_IOC_QUOTA_RESCAN_WAIT (#3266)Stefan Saraev
2016-05-16vconsole-setup: Store fonts on heap (#3268)Kyle Russell
More friendly to the stack.
2016-05-15hwdb: add touchpad resolution for Lenovo E530 (#3265)Peter Hutterer
https://bugs.freedesktop.org/show_bug.cgi?id=95231
2016-05-15namespace: Make private /dev noexec and readonly (#3263)topimiettinen
Private /dev will not be managed by udev or others, so we can make it noexec and readonly after we have made all device nodes. As /dev/shm needs to be writable, we can't use bind_remount_recursive().
2016-05-15/var/tmp instead of /tmp/var in systemd.unit man page (#3262)gdamjan
2016-05-15man: fix typo (#3261)Andre Klärner
2016-05-15sd-dhcp6-client: add log_errno macro and improve debug messages a bitZbigniew Jędrzejewski-Szmek
2016-05-15tree-wide: drop spurious "&"s when passing functions aroundZbigniew Jędrzejewski-Szmek
Also adjust indentation in various places.
2016-05-15networkd: do not generate a mac address for vlan interfaces (#3221)Susant Sahani
While creating a VLAN the mac address should be copied from the parent interface, so that the VLANs inherit the MAC address of the physical interface. Before: ``` 3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff ... 6: vlan1@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 22:07:73:9d:43:59 brd ff:ff:ff:ff:ff:ff 7: vlan2@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 46:30:76:33:35:d4 brd ff:ff:ff:ff:ff:ff ``` After: ``` 3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff ... 11: vlan1@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff 12: vlan2@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff ``` v2 of #1573, with fixed commit message.
2016-05-15networkd: bridge add support to configure multicast snooping (#3223)Susant Sahani
This patch implements support for the IFLA_BR_MCAST_SNOOPING attribute it can change the multicast snooping value. IGMP snooping monitors the Internet Group Management Protocol (IGMP) traffic between hosts and multicast routers.
2016-05-14networkd: fix copy-pasto in error messageZbigniew Jędrzejewski-Szmek
2016-05-14networkd: drop route_dropZbigniew Jędrzejewski-Szmek
It is just an alias for route_free which requires that route is not null, but it was only used in one place where it was checked that route is not null anyway. Let's just call route_free instead.
2016-05-14busctl: use Monitoring interface (#3245)Lars Uebernickel
This is now the recommended way to do monitoring by upstream D-Bus. It's also allowed in the default policy, whereas eavesdrop is not anymore, which effectively broke busctl on many systems.
2016-05-14core: allow slice to be overriden if cgroups aren't realized (#3246)Tejun Heo
unit_set_slice() fails with -EBUSY if the unit already has a slice associated with it. This makes it impossible to override slice through dropin config or over dbus. There's no reason to disallow slice changes as long as cgroups aren't realized. Fix it. Fixes #3240. Signed-off-by: Tejun Heo <htejun@fb.com> Reported-by: Davide Cavalca <dcavalca@fb.com>
2016-05-14Merge pull request #3253 from alshopov/masterZbigniew Jędrzejewski-Szmek
Bulgarian translation of systemd
2016-05-14namespace: unmount old /dev under our new private /dev (#3254)topimiettinen
Drop all dangling old /dev mounts before mounting a new private /dev tree.
2016-05-14Sort LINGUAS similar to Makefile.am:dist_catalog_DATAAlexander Shopov
2016-05-14po, catalog - add Bulgarian translationAlexander Shopov
2016-05-12nspawn: drop spurious newlineLennart Poettering
2016-05-12update TODOLennart Poettering
2016-05-12core: added ListUnitsByNames dbus method (#3182)kayrus
This new method returns information by unit names. Instead of ListUnitsByPatterns this method returns information of inactive and even unexisting units. Moved dbus unit reply logic into a separate shared function. Resolves https://github.com/coreos/fleet/pull/1418
2016-05-12Create initrd-root-device.target synchronization point (#3239)Daniel Drake
Add a synchronization point so that custom initramfs units can run after the root device becomes available, before it is fsck'd and mounted. This is useful for custom initramfs units that may modify the root disk partition table, where the root device is not known in advance (it's dynamically selected by the generators).
2016-05-11logind: introduce LockedHint and SetLockedHint (#3238)Victor Toso
Desktop environments can keep this property up to date to allow applications to easily track session's Lock status.
2016-05-11coredump: use next_datagram_size_fd instead of ioctl(FIONREAD) (#3237)Evgeny Vereshchagin
We need to be sure that the size returned here actually matches what we will read with recvmsg() next Fixes #2984
2016-05-10Merge pull request #3220 from keszybz/install-fixesLennart Poettering
Fix "preset-all" with dangling symlinks and install-section hint emitted too eagerly
2016-05-10man: document the nfs mount option bg as unsupported (#3231)tblume
The nfs mount option bg will not be supported with systemd. Reasons are discussed here: https://github.com/systemd/systemd/pull/3169
2016-05-10units: make sure that fsck is executed before quotachecktblume
fsck determines wheter an automatic quotacheck should be executed. Hence fsck service needs to run before quotacheck service.
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-26 06:32:09 +0000