summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-01-06systemd: use unit logging macrosZbigniew Jędrzejewski-Szmek
2013-01-06journal: new logging macros to include UNIT=Zbigniew Jędrzejewski-Szmek
Adding UNIT= to log lines allows them to be shown in 'systemctl status' output, etc. A new set of macros and functions is added. This allows for less verbose notation than using log_struct() explicitly. The set of logging functions is expanded to take a pair of arguments (e.g. "UNIT=" and the RHS) which add an extra line to the structured log entry. This can be used to add macros which add a different identifier later on.
2013-01-06fstab-generator: modernize styleZbigniew Jędrzejewski-Szmek
2013-01-06core/path: modernize styleZbigniew Jędrzejewski-Szmek
2013-01-06core/mount: modernize styleZbigniew Jędrzejewski-Szmek
2013-01-06core/dbus-unit: modernize styleZbigniew Jędrzejewski-Szmek
2013-01-06core/manager: modernize styleZbigniew Jędrzejewski-Szmek
2013-01-06build-sys: use VALGRIND not __OPTIMIZE__ as condition for valgrind compatZbigniew Jędrzejewski-Szmek
Actually, one might want to run valgrind even on optimized code. Now the same check is used in the jenkins hash functions and hashtable.
2013-01-06build-sys: use recipe for moving libsZbigniew Jędrzejewski-Szmek
Just avoids repeating the same code a few times. The way that hooks are named is standardized. No functional change.
2013-01-06TODO: updateKay Sievers
2013-01-06udev: fix net name rules matchesKay Sievers
2013-01-06analyze: add .gitignoreKay Sievers
2013-01-06udev: enable persistent network device namingKay Sievers
2013-01-05build-sys: use full path to python in scriptsZbigniew Jędrzejewski-Szmek
Commit c4eb236a2c didn't take into account the situation when the user sets e.g. PYTHON=python3 (without the full path). This value would then be used verbatim for PYTHON_BINARY and in she-bang lines in scripts, which is incorrect. To fix this, $PYTHON is passed through which, which expands the path. If $PYTHON_BINARY is desired which is not installed on the build system, then PYTHON_BINARY must be set separately.
2013-01-04build-sys: fix message about gintrospectionZbigniew Jędrzejewski-Szmek
When gobject-introspection-devel was not available, the message was missing the yes/no part
2013-01-04build-sys: invoke scripts with $PYTHON during buildZbigniew Jędrzejewski-Szmek
Python binary to be used during compilation can be set with ./configure PYTHON=... The she-bang line is removed, since it is not used anymore.
2013-01-04systemd-analyze: use specified binary, add --versionZbigniew Jędrzejewski-Szmek
Python binary used in the she-bang line in installed scripts can be set with ./configure PYTHON_BINARY=... Defaults to the same path as python used during compilation. Adding --version makes systemd-analyze behave consistently with the rest of installed programs. The lines in ./configure output are reordered to keep all yes/no lines separate. I think that this makes the output clearer.
2013-01-04systemd-analyze: pipe through SED_PROCESSZbigniew Jędrzejewski-Szmek
To be able to add --version and change python binary.
2013-01-04service: fixup after ifdef droppingZbigniew Jędrzejewski-Szmek
Commit 88516c0 removed one line too much.
2013-01-04systemd-analyze: reword commentsZbigniew Jędrzejewski-Szmek
2013-01-04build-sys: allow update-hwdb with seperate build dirZbigniew Jędrzejewski-Szmek
2013-01-04build-sys: drop unused $RUNTIME_DIRZbigniew Jędrzejewski-Szmek
2013-01-04build-sys: drop all distribution specfic checksLennart Poettering
Yay, we now have a completely generic systemd. No distribution specific checks anymore!
2013-01-04build-sys: make path of loadkeys/setfont configurable in configureLennart Poettering
2013-01-04service: drop inserv.conf parsingLennart Poettering
This Suse specific configuration file should really be done in a generator that is shipped downstream by suse.
2013-01-04service: drop the per-distro ifdefs in service.cLennart Poettering
They don't really hurt on other distros, and this allows us to ship the same code on all distros
2013-01-04units: always use sulogin in rescue.serviceLennart Poettering
sushell makes much less sense than sulogin. If distros want to stick to sushell they should patch this downstream.
2013-01-04units: drop distro specific stuff from unitsLennart Poettering
Since rc-local is now enabled via the SysV compatibility we should only refer to it based on that too.
2013-01-04systemctl: enable chkconfig compat only if chkconfig is found rather than ↵Lennart Poettering
based on distro
2013-01-04fsck: remove distro specific hacks from fsck/quotacheckLennart Poettering
Move forcefsck file checks under a HAVE_SYSV_COMPAT #ifdef, and warn if this is used.
2013-01-04Make gcc a bit quieterLennart Poettering
2013-01-04build-sys: make rc-local support part of SYSV compatLennart Poettering
This also drops automatic selection of the rc local scripts based on the local distro. Distributions now should specify the paths of the rc-local and halt-local scripts on the configure command line.
2013-01-04core: drop support for old per-distro configuration files for console, ↵Lennart Poettering
hostname, locale, timezone This simplifies the upstream system code quite a bit. If downstream distributions want to maintain compatibility with their old configuration files, they are welcome to do so, but need to maintain this as patches downstream. The burden needs to be on the distributions to maintain differences here. Our suggestion however is to just convert the old configuration files on upgrade, as multiple distributions already do.
2013-01-04udev: net_id - append "dev_id" value if neededKay Sievers
2013-01-04udev: set device node permissions only at "add" eventsKay Sievers
2013-01-04Added globbing support to EnvironmentFilePekka Lundstrom
This patch allows globbing to be used with EnvironmentFile option. Example: EnvironmentFile=/etc/foo.d/*.conf t. Pekka
2013-01-04systemctl: add is-failedThomas Hindoe Paaboel Andersen
Adds is-failed to join is-active and is-enabled. I grabbed this one from the todo list. Most of the functionality was already there for is-active. I just needed to make check_one_unit take the states to check for as an argument instead of the hardcoded "active" and "reloading". is-failed will return 1 if none of the units given are failed. This is different from is-active which will return 3 if none of the units given are active. It returns 3 with this comment: /* According to LSB: "program is not running" */ As that does not make sense when looking for failed units I simply chose 1 instead.
2013-01-04man: fix parameter in systemd-fstab-generator(8)Michał Bartoszkiewicz
There is no parameter named luks.fstab.
2013-01-04localed: create /etc/X11/xorg.conf.d if neededMichał Bartoszkiewicz
Use mkdir_p_label instead of mkdir_parents_label, so that the final directory component is created too.
2013-01-03correct Macedonian keyboard mapping (X layout is 'mk', not 'mkd')Adam Williamson
2013-01-03add Lithuanian keyboard mapping (lt/lt)Adam Williamson
2013-01-03add Kazakh keyboard mapping (kazakh/kz)Adam Williamson
2013-01-03add Hebrew (Israel) - simple, il/ilAdam Williamson
2013-01-03French Canadian xlayout is just "ca", not "ca(fr)" any moreAdam Williamson
2013-01-03add Belarussian mapping: simple, 'by' and 'by'Adam Williamson
2013-01-03tmpfiles: Fix file descriptor leak on errorThomas Jarosch
Detected by cppcheck
2013-01-03readahead: don't complain that we cannot precache symlinksLennart Poettering
http://lists.freedesktop.org/archives/systemd-devel/2012-December/007847.html
2013-01-03man: clarify that specifiers cannot be used in ExecStart='s first argumentLennart Poettering
2012-12-31TODOLennart Poettering
2012-12-31unit: add ConditionACPower=Lennart Poettering
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-12-12 00:18:03 +0000