| Age | Commit message (Collapse) | Author |
|---|
|
Information about signals which are not routinely received by systemd
are printed at info level. This should make it easier to see what is
happening in the system.
|
|
|
|
We need to be able to stop the dhcp client at any time, and the function appears to be written to handle this.
|
|
|
|
|
|
|
|
If a network is not (yet) set for a link, we do not care about its state (as we
anyway don't know what to do with it).
|
|
Remove redundant messages, add some debugging ones and make wording more uniform.
|
|
|
|
We were requesting the state and then ignoring it...
|
|
This adds basic DHCPv4 support. Link-sense is enabled unconditionally,
but the plan is to make that configurable.
I tested this in a VM with lots of NICs and over wifi in the various
coffee shops I found this Christmas, but more testing would definitely
be appreciated.
|
|
Static addresses/routes are associated with a network. Dynamic
addresses/routes are associtade with links (as the corresponding network
may be shared by several links).
|
|
|
|
|
|
GREEDY_REALLOC needs to have two size variables: one for the
allocated size, and a second one for the used size. Using
the allocated size only lead to leaving some elements unitialized
and assigning some more than once.
|
|
This makes them behave like everything else following
48d7417d3 'build-sys: link most internal libraries statically'.
|
|
Before 34a3baa4d 'sleep-config: Dereference pointer before check for NULL'
oom conditions would not be detected properly. After that commit, a double
free was performed.
Rework the whole function to be easier to understand, and also replace
strv_split_nulstr with strv_new, since we know the strings anyway.
|
|
2 lines after the changed line we assign err to efi_get_variable(...)
unconditionally, so it makes no sense to initialize it to some value.
|
|
This fixes a bug pointed out by http://css.csail.mit.edu/stack/
(Optimization-unstable code)
It is a similar fix as f146f5e159 (2013-12-30, core:
Forgot to dereference pointer when checking for NULL)
To explain this bug consider the following similar, but simpler code:
if (!p)
free(*p)
Assume the if condition evaluates to true, then we will access *p,
which means the compiler can assume p is a valid pointer, so it could
dereference p and use the value *p.
Assuming p as a valid pointer, !p will be false.
But initally we assumed the condition evaluates to true.
By this reasoning the optimizing compiler can deduce, we have dead code.
("The if will never be taken, as *p must be valid, because otherwise
accessing *p inside the if would segfault")
This led to an error message of the static code checker, so I checked the
code in question.
As we access *modes and *states before the check in the changed line of
this patch, I assume the line to be wrong and we actually wanted to check
for *modes and *states being both non null.
|
|
Directly before the changed line there is:
while ((parent->next_ps && parent->pid != ps->ppid))
parent = parent->next_ps;
which looks one element ahead of the list, hence we can rely on parent
being non null here.
If 'parent' were NULL at that while loop already, it would crash as we're
dereferencing 'parent' when checking for next_ps already.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
|
|
As suggested by Kay, it is better to describe what is done,
not what might happen.
|
|
shumski> there seems to be slight error in systemd git master Makefile.am
|
|
Actually we already checked for !rt before, now we'd like to examine
the return value of the memory allocation.
|
|
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=727708#1694
|
|
|
|
The return value of 0 would be treated as failure by mistake,
resulting in " SystemError: error return without exception set".
The way that set_error() is used is changed to be the same
everywhere.
|
|
Nspawn has --setenv, and systemd itself accepts systemd.setenv.
It is nice to have the same parameter name everywhere.
Old name is accepted, but not advertised.
|
|
|
|
scan-build is a static analyzer in llvm. As ususal static analyzers
tend to mostly find theoretical bugs in software that has been in
production for a while. For in-development code it can be useful to
check if new issues is added as there is a chance to spot real problems
before release. For systemd we are now down to 297 issues - the vast
majority are false positives because the tool does not understand the
cleanup attribute.
Running clang's static analyzer scan-build is a bit messy. You have to
run both configure and make "inside" the build-scan tool. To have an
easy shortcut from autogen.sh I thus call both directly from it. This
makes it different from the other options in autogen.sh. I chose 's'
for static analysis.
scan-build is in the package clang-analyzer on fedora.
|
|
For a while I have been cleaning up warnings when building with clang.
There are currently only two sources of warnings left: Wcast-align and Wgnu.
I am not convinced that fixing up those up is feasible so I run with them
disabled to spot regressions. E.g. clang is a bit more strict wrt to unused
variables with the cleanup attribute and I have fixed a number of those since.
Like the other options in autogen.sh I have a shortcut for clang as well. I use
'l' for llvm.
|
|
|
|
|
|
This was causing a nasty coredump
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=40446
|
|
SELinux check will be done using the context of the unit file as as a
target instead of the default init_t context, allowing selinux control
on the level of individual units.
https://bugzilla.redhat.com/show_bug.cgi?id=1022762
|
|
compat parser
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
grawity:
It looks like the old version _was_ correct – the default value will
be "Type=dbus" if the service has a BusName set.
Suggested change: "if neither Type= nor BusName= is specified"
|
|
|
|
|
|
|
|
|
