| Age | Commit message (Collapse) | Author |
|---|
|
|
|
The ttyS[0-3] devices are weird. They may be enumerated, but when one
actually tries to open and use them they return EIO, because they don't
actually exist. Because they may be enumerated they may be specified on
the kernel command line as console=. And some people do that as default.
As response to that we'll spawn a getty on the tty that will quickly
fail, and we retry a couple of time before giving up. That is quite
noisy.
With this new change we will validate all serial terminals configured
with console= on the kernel cmdline before adding gettys on them, and
remove the invalid ones. THis should remove the noise later on.
This should make Eric Paris happy!
|
|
hence don't bother
|
|
|
|
We expose the control group of the units on the bus, so let's also
expose the root control group.
|
|
|
|
|
|
of the message
|
|
If an UDP packet has not passed through a hardware device, its checksum may not
have been computed. This is exposed through the TP_STATUS_CSUMNOTREADY sockopt.
When using raw sockets, skip checksum validation when TP_STATUS_CSUMNOTREADY
is set.
This is necessary for dhcp to work directly over a veth tunnel, e.g. as done
in systemd-nspawn.
|
|
|
|
|
|
|
|
|
|
The RFC does not specify that the packets from the DHCP server must come from
the DHCP server port, only that that's where they should be sent.
This fixes a problem when running networkd in VirtualBox.
Thanks to Sébastien Luttringer for reporting the bug and very patiently testing
various fixes.
|
|
This avoids the problem of broken DHCP servers sending us too big packets that don't fit in our buffer.
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1047148
|
|
interfaces show up
https://bugzilla.redhat.com/show_bug.cgi?id=1062955
|
|
Also be more explicit about why packages are ignored.
|
|
|
|
for sizes
According to Wikipedia it is customary to specify hardware metrics and
transfer speeds to the basis 1000 (SI decimal), while software metrics
and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary).
So far we specified everything in IEC, let's fix that and be more
true to what's otherwise customary. Since we don't want to parse "Mi"
instead of "M" we document each time what the context used is.
|
|
|
|
../src/shared/unit-name.c:462: error: undefined reference to 'sd_bus_label_escape'
../src/shared/unit-name.c:477: error: undefined reference to 'sd_bus_label_unescape'
collect2: error: ld returned 1 exit status
|
|
This may be a common problem, so let's make it simpler to debug,
at least for now.
|
|
sd_memfd_new is available twice. Remove the second one.
|
|
|
|
available ifunc wrapping
|
|
|
|
|
|
|
|
|
|
For gudev -> gudevdevice:
- Add support for get_sysfs_attr_keys()
- Add support for has_sysfs_attr()
|
|
This also changes the names to MTUBytes and BitsPerSecond, respectively. Notice
that the speed was mistakenly documented to be in bytes before this change.
|
|
When starting systemd-nspawn with --network-veth, we create a veth device called
host0 in the guest. Pick up on this and start a dhcp client on it. We will also
pick up host0 netdevs created by other containers should they chose to use the
same name.
|
|
|
|
|
|
|
|
particular devices nodes
|
|
|
|
Also fix a copy-paste error that broke matching on interface name.
|
|
This will do until all net properties are imported.
|
|
needed after libsystemd-daemon was merged into libsystemd in
0ebee8818404adb95a0b8a01416aad3a16f64ae1
|
|
|
|
|
|
Just two minor style fixes...
|
|
sleep immediately again
This is quite useful on laptops such as the Lenovo Yoga, where the power
button is placed on the front side of the laptop and can be pressed by
accident even if the lid is closed.
This reworks a bit of the logind logic to repeatedly try to suspend the
system as long as a lid is closed. We use the new "post" event source
for this, so that we don't keep things busy.
This also adds some code to check the lid status on boot, so that a
powered-off machine that is accidentaly powered on goes into suspend
immediately.
Yay! From now on I can put my Yoga safely in my backpack without fearing
that it might turn itself on and drain the battery.
|
|
This new event source is triggered by the dispatching of any non-post
event source. It can thus be used to do clean-up or recheck work,
triggered by any other event source having been executed.
This is different from "defer" event source which are unconditionally
triggered as long as they are enabled. A "defer" event source that does
nothing will result in the event loop busy looping unless it is turned
off eventually. This is different for "post" event sources that will be
only triggered when some other non-post ran, and will thus not keep the
event loop busy on its own.
|
|
|
|
This is the same as shown by 'ethtool -i <ifname>', and is sometimes
set even though DRIVER is not.
|
|
utf8 needs to be initialized to NULL for the free for the early return,
otherwise we try to free invalid data.
|
|
It doesn't make any sense to symlink this unit file into /etc when the
unit file itself isn't even installed, with --disable-networkd. This
moves the GENERAL_ALIASES logic into the right "if" block.
|
