summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-04udev: net_setup - allow matching on OriginalName=Tom Gundersen
This has been requested repeatedly, so let's give it a go. We explicitly do not allow matching on names that have already been changed (from a previous udev run, or otherwise), and matching on unpredictable names (ethX) is discouraged (but not currently disallowed). We also currently allow: [Match] Name=veth0 [Link] Name=my-name0 SomeOtherSetting=true Which means that the link file will be applied the first time it is invoked, but not on subsequent invocations, which may be surprising.
2014-12-04missing: apparently, there's a world beyond x86..David Herrmann
..so make them cry and print a warning if __NR_memfd_create is not defined. This should make syscall() fail with -ENOSYS, thus trigger a suitable runtime error-path.
2014-12-04sd-rtnl: fix compileTom Gundersen
No idea how this appeared to compile for me. Mea culpa.
2014-12-04update TODOLennart Poettering
2014-12-04smack-util: remove warning when building without SMACK supportLennart Poettering
2014-12-04sd-rtnl: rename sd_rtnl_message_route_get_{dst,src}_len to *_prefixlenTom Gundersen
This makes the API more consistent.
2014-12-04hwdb: Update database of Bluetooth company identifiersMarcel Holtmann
2014-12-04networkd: tunnel - allow INADDR_ANY as the local addressTom Gundersen
2014-12-04networkd: add support for source routingTom Gundersen
2014-12-04udevd: SAS: use SAS addr + PHY id in by-path whenever possible.Maurizio Lombardi
This patch changes the naming scheme for sas disks. The original names used disk's sas address and lun, the new scheme uses sas address of the nearest expander (if available) and a phy id of the used connection. If no expander is used, the phy id of hba phy is used. Note that names that refer to RAID or other abstract devices are unchanged. Name in raid configuration: hba_pci_address-sas-raid_sas_address-lunY-partZ Name in expander bare disk configuration: hba_pci_address-sas-expander_sas_address-phyX-lunY-partZ Name format without expanders: hba_pci_address-sas-phyX-lunY-partZ Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
2014-12-04networkd: fix compileTom Gundersen
Rebase failure on my side.
2014-12-04networkctl: use the shared functions for enumerating the local gatewaysTom Gundersen
2014-12-04networkd: Add bridge port path costSusant Sahani
This patch add support to specify path cost of the bridge port to be configured via conf file. Exampe: conf file: br.netdev [NetDev] Name=br-test Kind=bridge file: br.network [Match] Name=em1 [Network] Bridge=br-test [BridgePort] Cost=332 bridge link 2: em1 state UP : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br-test state disabled priority 32 cost 332
2014-12-04networkd: support vxlan parametersSusant Sahani
V3: fix copy paste error V4: Make manual and config more readable Add vxlan paramertes to config.
2014-12-04update TODOLennart Poettering
2014-12-04rtnl: order local addresses/gateways by the address itself as last resortLennart Poettering
This way we can be sure that the returned list is stable regarding modifications in the kernel.
2014-12-04selinux: figure out selinux context applied on exec() before closing all fdsMichal Sekletar
We need original socket_fd around otherwise mac_selinux_get_child_mls_label fails with -EINVAL return code. Also don't call setexeccon twice but rather pass context value of SELinuxContext option as an extra argument.
2014-12-04units: skip mounting /dev/hugepages if we don't have CAP_SYS_ADMINMichal Sekletar
Preparation for allowing systemd to run gracefully in containers lacking CAP_SYS_ADMIN.
2014-12-04utf8: minor simplificationsLennart Poettering
2014-12-04utf8: when escaping unprintable unichars, escape the whole unichar, not just ↵Lennart Poettering
the first byte of it
2014-12-04bootchart: escape non printable process nameWaLyong Cho
2014-12-04utf8: intruduce utf8_escape_non_printableWaLyong Cho
2014-12-04bootchart: add standalone bootchart serviceWaLyong Cho
2014-12-04rtnl: when querying local addresses and gateways, take address family into ↵Lennart Poettering
account
2014-12-04sd-bus: avoid a null dereferenceThomas Hindoe Paaboel Andersen
2014-12-04systemctl: fix a leakThomas Hindoe Paaboel Andersen
2014-12-04test-path-util: fix a leakThomas Hindoe Paaboel Andersen
2014-12-04vconsole: don't hard-code systemd-vconsole-setup binary pathMichael Biebl
2014-12-03networkctl: remove unused variableThomas Hindoe Paaboel Andersen
2014-12-03util: don't shadow variableThomas Hindoe Paaboel Andersen
environ is already defined in unistd.h
2014-12-03resolved: don't resolve the hostname "gateway" with LLMNR, leave that to ↵Lennart Poettering
nss-myhostname
2014-12-03rtnl: make checks for default routes more strictLennart Poettering
Also check that the source netmask is 0, not only the destination netmask.
2014-12-03nss-myhostname: always resolve the host name "gateway" to the local default ↵Lennart Poettering
gateway This is useful inside of containers or local networks to intrdouce a stable name of the default gateway host (in case of containers usually the host, in case of LANs usually local router).
2014-12-03networkd: fix typoTorstein Husebø
V2: found another one
2014-12-03udevd: don't take reference for NULL rtnl objectTom Gundersen
2014-12-03strv: add calls to add two entries to an strv at onceLennart Poettering
2014-12-03localed: log xkbcommon errorsJan Synacek
The errors are prefixed with "libxkbcommon" to provide some context, because they are quite confusing without it. With the prefix, we at least know where they come from.
2014-12-03nspawn: correct EEXIST check when creating directory to mount /tmp inLennart Poettering
https://bugs.freedesktop.org/show_bug.cgi?id=86309
2014-12-03build-sys: update man-listDavid Herrmann
Run 'make update-man-list'.
2014-12-03machine-id-commit: add man pagesDidier Roche
Add man pages for systemd-machine-id-commit.service and systemd-machine-id-commit.
2014-12-03machine-id-commit: add unit fileDidier Roche
The unit file only active the machine-id-commit helper if /etc is mounted writable and /etc/machine-id is an independant mount point (should be a tmpfs).
2014-12-03machine-id-commit: Introduce machine-id-commit binaryDidier Roche
This binary enables to commit transient machine-id on disk if it becomes writable.
2014-12-03machine-id-setup: add a machine_id_commit call to commit on disk a transient ↵Didier Roche
machine-id If /etc was read only at boot time with an empty /etc/machine-id, the latter will be mounted as a tmpfs and get reset at each boot. If the system becomes rw later, this functionality enables to commit in a race-free manner the transient machine-id to disk.
2014-12-03machine-id-setup: casting const away is ugly, let's not do it if there's no ↵Lennart Poettering
reason to
2014-12-03update TODOLennart Poettering
2014-12-03machine-id-setup: Factorize some machine-id-setup functions to be reusedDidier Roche
2014-12-03rfkill: rework how we generate file names from rfkill devicesLennart Poettering
Generate the file name from ID_PATH plus the rfkill type (wlan, bluetooth, ...) and ignore the rfkill device name, since it apparently is not a stable identifier. Also, ensure that devices disappearing don't result in broken services, simply exit cleanly.
2014-12-03libudev: set errno properly in all error conditions of ↵Lennart Poettering
udev_device_new_from_syspath()
2014-12-02DISTRO_PORTING: add full path for /usr/lib/systemd/systemd and fix grammarChris Atkinson
(David: fixed up some trailing whitespace and commit-message)
2014-12-02shared: add format helpers for printing MAC addressesTom Gundersen
Use these in networctl.
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-14 18:35:46 +0000