| Age | Commit message (Collapse) | Author |
|---|
|
Rename the enum, the lookup functions and the parser for LLMNRSupport so
the type can be reused for mDNS.
|
|
Make a scope with invalid protocol state fail as soon as possible.
|
|
With more protocols to come, switch repetitive if-else blocks with a
switch-case statements.
|
|
|
|
A variety of resolved fixes
|
|
If we try to resoolve an LLMNR PTR RR we shall connect via TCP directly
to the specified IP address. We already refuse to do this if the address
to resolve is of a different address family as the transaction's scope.
The error returned was EAFNOSUPPORT. Let's change this to ESRCH which is
how we indicate "not server available" when connecting for LLMNR or DNS,
since that's what this really is: we have no server we could connect to
in this address family.
This allows us to ensure that no server errors are always handled the same
way.
|
|
If the user specifies an interface by its ifindex we should handle this
nicely. Hence let's try to parse the ifindex as a number before we try
to resolve it as an interface name.
|
|
So far we handled immediate "no server" query results differently from
"no server" results we ran into during operation: the former would cause
the dns_query_go() call to fail with ESRCH, the later would result in
the query completion callback to be called.
Remove the duplicate codepaths, by always going through the completion
callback. This allows us to remove quite a number of lines for handling
the ESRCH.
This commit should not alter behaviour at all.
|
|
Right now we keep track of ongoing transactions in a linked listed for
each scope. Replace this by a hashmap that is indexed by the RR key.
Given that all ongoing transactions will be placed in pretty much the
same scopes usually this should optimize behaviour.
We used to require a list here, since we wanted to do "superset" query
checks, but this became obsolete since transactions are now single-key
instead of multi-key.
|
|
sd-device: fix enumeration of devices without subsystem
|
|
If a connection passed KDBUS_HELLO_ACTIVATOR, it cannot do I/O on the
bus. Hence, we should not treat it as proper peer. To actually query it,
you have to explicitly ask for activators.
This makes kdbus in-line with what dbus-daemon does.
|
|
This reverts commit 92d16a53e385781a55d9231d9f8f89c1747ab0e4. As it turns
out, this is not how ObjectManager is supposed to work. It is just a
special behavior of BlueZ, but no-one else implements it this way.
Revert the patch as discussed on github, and as such revert to the
previous behavior (as described in the spec).
|
|
hwdb: add more DPI entries
|
|
Provided by Francois Marier
|
|
Prior to commit c32eb440bab953a0169cd207dfef5cad16dfb340, libudev's
function udev_enumerate_scan_devices() had behaved differently. If
parent match was added with udev_enumerate_add_match_parent(),
udev_enumerate_scan_devices() did not return error if some child devices
had no subsystem symlink in sysfs. An example of such devices is USB
endpoints /sys/bus/usb/devices/*/ep_*. If there was a parent match
against USB device, old implementation of udev_enumerate_scan_devices()
did not treat ep_* device directories without subsystem symlink as error
and just ignored them, but new implementation returns -ENOENT (also
ignoring these devices) though correctly enumerates all other matching
devices.
To compare, you could look at 96df036fe3d25525a44f5efdb2fc8560e82e6cfd,
in src/libudev/libudev-enumerate.c, function parent_add_child():
if (!match_subsystem(enumerate, udev_device_get_subsystem(dev)))
goto nomatch;
udev_device_get_subsystem() was returning NULL, match_subsystem() was
returning false, and USB endpoint device was ignored.
New parent_add_child() from src/libsystemd/sd-device/device-enumerator.c
checks return value of sd_device_get_subsystem() and fails if subsystem
was not found. Absence of subsystem symlink should not be really treated
as error because all enumerations of children of USB devices will fail
with -ENOENT. This new behavior also breaks system-config-printer.
So restore old behavior and treat absence of subsystem symlink as no
match.
|
|
only maintain one question RR key per transaction and other fixes
|
|
remove unused variables
|
|
We do so for Unicast DNS and LLMNR anyway, let's also do this for mDNS,
and simplify things.
|
|
Let's simplify things and only maintain a single RR key per transaction
object, instead of a full DnsQuestion. Unicast DNS and LLMNR don't
support multiple questions per packet anway, and Multicast DNS suggests
coalescing questions beyond a single dns query, across the whole system.
|
|
It shouldn't happen that we try to resolve IPv4 addresses via LLMNR on
IPv6 and vice versa, but let's explicitly verify that we don't turn an
IPv4 LLMNR lookup into an IPv6 TCP connection.
|
|
|
|
|
|
Don't do name compression when passing RRs across the bus
|
|
man: rework systemd-run man page a bit
|
|
|
|
We explicitly need to turn off name compression when marshalling or
demarshalling RRs for bus transfer, since they otherwise refer to packet
offsets that reference packets that are not transmitted themselves.
|
|
|
|
core: downgrade "Module inserted" message for kmod to DEBUG
|
|
Closes #919.
|
|
resolved: synthesize more RRs locally and other fixes
|
|
With this change we'll now also generate synthesized RRs for the local
LLMNR hostname (first label of system hostname), the local mDNS hostname
(first label of system hostname suffixed with .local), the "gateway"
hostname and all the reverse PTRs. This hence takes over part of what
nss-myhostname already implemented.
Local hostnames resolve to the set of local IP addresses. Since the
addresses are possibly on different interfaces it is necessary to change
the internal DnsAnswer object to track per-RR interface indexes, and to
change the bus API to always return the interface per-address rather than
per-reply. This change also patches the existing clients for resolved
accordingly (nss-resolve + systemd-resolve-host).
This also changes the routing logic for queries slightly: we now ensure
that the local hostname is never resolved via LLMNR, thus making it
trustable on the local system.
|
|
Following our usual logic of treating NULL arrays as empty arrays (for
example, see strv.c) do the same for questions too.
|
|
|
|
This is specifically useful for appending the mDNS ".local" suffix to a
single-label hostname in the most correct way. (used in later commit)
|
|
sd-dhcpv6: support DNS and NTP information
|
|
man: networkd - adding bonding examples for systemd-networkd
|
|
This moves is_gateway() from nss-myhostname into the basic APIs, and
makes it more like is_localhost(). Also, we rename it to
is_gateway_hostname() to make it more expressive.
Sharing this function in src/basic/ allows us to reuse the function for
routing name requests in resolved (in a later commit).
|
|
Append DNS and NTP data obtained via DHCPv6 when the Link is saved.
|
|
|
|
Test option setting and getting in test_advertise_option(). Verify
that the information provided in DHCPv6 Reply messages is also
available in the Information and Solicit callbacks.
|
|
Although the SNTP option specified in RFC 4075 has been deprecated, some
servers are still sending NTP information with this option. Use the SNTP
information provided only if the NTP option is not present.
Update the test case as SNTP information is also requested.
|
|
Support NTP server and multicast addresses and NTP server domain names
as specified in RFC 5908.
|
|
Support DHCPv6 DNS search list option as specified in RFC 3646. This
option contains a list of DNS search domains encoded without compression
as specified in Section 8. of RFC 3315.
|
|
Support DHCPv6 DNS server option as specified in RFC 3646. This option
contains a list of IPv6 DNS server addresses.
|
|
Add a helper function containing a modified version of dns_packet_read_name()
that does not use DnsPacket to extract a string array of domain names from
the provided option data. The domain names are stored uncompressed as defined
in Section 8. of RFC 3315.
|
|
Add a helper function that extracts a block of IPv6 addresses from
the provided option data.
|
|
As the lease structure contains interesting information, save it also
for the Information Reply.
|
|
When the DHCPv6 client is started by the library user or stopped for
any reason, unref the DHCPv6 lease when resetting the DHCPv6 client
data structure. This makes the DHCPv6 client always start from a clean
state and not keep unnecessary an lease structure around when stopped.
If this is not done, a previously existing lease information can be
interpreted to be from another server when restarting DHCPv6.
|
|
man: fix typo in description of system.slice
|
|
timedatectl: when no timezone is set consider UTC the default
|
