summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-20tests: more tests for util.cThomas Hindoe Paaboel Andersen
tests for: test_parse_pid test_parse_uid test_safe_atolli test_safe_atod
2013-02-20man: document %%Zbigniew Jędrzejewski-Szmek
2013-02-18test-strv.c: ported test_specifier_printf() to _cleanup_free_ + assert_se + ↵Daniel Buch
cleanup
2013-02-18test-strv.c: added OOM check for current testsDaniel Buch
New OOM check patch: I do assert_se() before variable is used to do correct check.
2013-02-18test-strv.c: added strv_split_nulstr() testDaniel Buch
2013-02-18tests: add test of memdup_multiplyThomas Hindoe Paaboel Andersen
2013-02-17man: Add reason for disk model info not workingWilliam Giokas
In systemd-bootchart, the disk model information will not be found unless the root device is specified using `root=/dev/sdxY` on the kernel line. Just add a note as to why this doesn't happen.
2013-02-17bootctl: show "n/a" for empty boot option labelsKay Sievers
2013-02-17udev: usb_id: parse only 'size' bytes of the 'descriptors' bufferKay Sievers
2013-02-17udev: usb_id - ignore non-ASCII serial numbersKay Sievers
On Thu, Feb 7, 2013 at 3:52 PM, Robert Milasan <rmilasan@suse.com> wrote: > Hi, seems that using some strange usb devices with really bogus serial > numbers usb_id creates links with junk strings in it: > > /dev/disk/by-id/usb-TSSTcorp_BDDVDW_SE-506AB_㡒䍌䜶䉗ぁㄴ㌴†ँ-0:0 > > Initially was believed that usb_id is to blame, then the kernel, but it > turns out that really the usb cd/dvd drive has this bogus serial number: > > output from dmesg: > [ 538.200160] usb 1-2: new high-speed USB device number 5 using > ehci_hcd [ 538.335067] usb 1-2: New USB device found, idVendor=0e8d, > idProduct=1956 [ 538.335080] usb 1-2: New USB device strings: Mfr=1, > Product=2, SerialNumber=3 [ 538.335089] usb 1-2: Product: MT1956 > [ 538.335097] usb 1-2: Manufacturer: MediaTek Inc > [ 538.335105] usb 1-2: SerialNumber: > \xffffffe3\xffffffa1\xffffff92\xffffffe4\xffffff8d\xffffff8c ... > [ 538.337540] scsi6 : usb-storage 1-2:1.0 [ 539.341385] scsi 6:0:0:0: > CD-ROM TSSTcorp BDDVDW SE-506AB TS00 PQ: 0 ANSI: 0 > [ 539.354240] sr0: scsi3-mmc drive: 0x/24x writer dvd-ram cd/rw > xa/form2 cdda tray [ 539.354777] sr 6:0:0:0: Attached scsi CD-ROM sr0 > [ 539.355122] sr 6:0:0:0: Attached scsi generic sg2 type 5
2013-02-17efi: compare by substractionKay Sievers
2013-02-17udev: expose new ISO9660 properties from libblkidZeeshan Ali (Khattak)
2013-02-16TODOAuke Kok
2013-02-16systemctl: allow comma sepearted property listsZbigniew Jędrzejewski-Szmek
2013-02-16man: prettify systemctl(1)Zbigniew Jędrzejewski-Szmek
- reindent with two spaces, otherwise everything is squeezed near the right margin, - mark only optional arguments as optional, - some typos, etc.
2013-02-16bootchart: rename --filter to --no-filterZbigniew Jędrzejewski-Szmek
Turning off filtering with --filter is just too confusing. Config option "Filter" doesn't have to be changed, here "Filter=yes" already meant to filter.
2013-02-16bootchart: provide better error messagesZbigniew Jędrzejewski-Szmek
2013-02-16man: move bootchart README to manpage, docbooksifyZbigniew Jędrzejewski-Szmek
2013-02-16systemctl: Don't give re-activation warning if unit is maskedJan Janssen
2013-02-16systemctl: allow status with no unitsZbigniew Jędrzejewski-Szmek
This makes 'status' behave like 'list-units': systemctl status -> status of all units systemctl -t error status -> status of error units systemctl -t mount status -> etc.
2013-02-16unit: don't Require systemd-journald.socket from unitsMichal Schmidt
It is not really necessary to have a hard requirement dependency on systemd-journald.socket in almost every unit. The socket gets pulled into boot via at least two ways: sockets.target -> systemd-journald.socket sysinit.target -> systemd-journald.service -> systemd-journald.socket So just assume something pulled the socket in and drop the automatic requirement dependencies on it. "systemctl stop systemd-journald.socket" will now not take the whole system down with it.
2013-02-16execute: increase severity of journal connect failure messageMichal Schmidt
journald is supposed to work. Failure to connect to its socket implies losing messages. It should be a very unusual event. Log the failure with LOG_CRIT. Just because this unit's stdout/stderr failed to connect to the journal does not necessarily mean that we shouldn't try to log the failure using a structured entry, so let's use log_struct_unit.
2013-02-16execute: unify setup_{output,error}Michal Schmidt
The functions are quite similar. Unify them into one. The source gets shorter, the binary gets slightly smaller.
2013-02-16execute: robustness against journald failuresMichal Schmidt
Almost every unit logs to the journal. If journald gets a permanent failure, units would not be able to start (exit code 209/STDOUT). Add a fallback to /dev/null to avoid making the system entirely unusable in such a case.
2013-02-16log: fix fallbacks to kmsgMichal Schmidt
write_to_journal() returns 0 if journal_fd is closed and nothing is written. We need to make sure we'll try log_open_kmsg() then to make the fallback work for "journal-or-kmsg".
2013-02-14man: Update bootchart.conf(5)William Giokas
Recent changes in config options makes almost eveny variable in the man page obsolete.
2013-02-14bootchart: if "root=/dev" is not matched, don't try to read /sysHarald Hoyer
2013-02-14update TODOThomas Hindoe Paaboel Andersen
2013-02-14bootchart: stricter checks of cli inputThomas Hindoe Paaboel Andersen
2013-02-14bootchart: use conf-parser & CamelCase names in .confThomas Hindoe Paaboel Andersen
2013-02-14core: do not overwrite existing units sourceUmut Tezduyar
Only set source for freshly created .mounts coming from mountinfo file.
2013-02-14systemctl: print wall message only if successfulZbigniew Jędrzejewski-Szmek
systemctl would write to the wall even if unsuccessful. https://bugs.freedesktop.org/show_bug.cgi?id=60393
2013-02-14systemctl: use automatic cleanupZbigniew Jędrzejewski-Szmek
2013-02-14nspawn: fail if unable to close pipeZbigniew Jędrzejewski-Szmek
2013-02-14man: Add even more to the bootchart man pageWilliam Giokas
Essentially transfer the 'README' file in src/bootchart to the man page for easier reading by users. Moved the 'History' section to the bottom, before the 'See Also' section. man/systemd-bootchart.xml | 100 ++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 83 insertions(+), 17 deletions(-)
2013-02-14bootchart: parse /etc/os-release rather than system-releaseHarald Hoyer
Also parse it early, so that we can get it in the initramfs.
2013-02-14bootchart: more fixes for bootchart in the initramfsHarald Hoyer
2013-02-14nspawn: print PID and show how to enter the namespaceZbigniew Jędrzejewski-Szmek
systemd-nspawn will now print the PID of the child. An example showing how to enter the container is added to the man page. Support for nsenter without an explicit command was added in https://github.com/karelzak/util-linux/commit/5758069 (post v2.22.2). So this example requires both a new kernel and the latest util-linux.
2013-02-14added some missing include for a5c32cff1f56afe6f0c6c70d91a88a7a8238b2d7Harald Hoyer
2013-02-14honor SELinux labels, when creating and writing config filesHarald Hoyer
Also split out some fileio functions to fileio.c and provide a SELinux aware pendant in fileio-label.c see https://bugzilla.redhat.com/show_bug.cgi?id=881577
2013-02-13bootchart itemsAuke Kok
2013-02-13man: use <replaceable> in various placesZbigniew Jędrzejewski-Szmek
2013-02-13man: add filenames to the indexZbigniew Jędrzejewski-Szmek
Limiting the addition to filenames from <refsynopsis> seems to give a good enough S/N ratio.
2013-02-13man: bootchart: change /var/log to /run/logWilliam Giokas
As of [1], bootchart stores files in /run/log, not /var/log, by default. [1] f2f85884caac671da84256acb44148df9a4dca70
2013-02-13Add systemd-analyze to .gitignoreAuke Kok
2013-02-13Move systemctl dot to systemd-analyze dotSimon Peeters
2013-02-13systemd-analyze: rewrite in C.Simon Peeters
Written by Peeters Simon <peeters.simon@gmail.com>. Makefile stuff and cleaned up a bit by Auke Kok <auke-jan.h.kok@intel.com>. Some code inspired by Marc-Antoine Perennou <Marc-Antoine@Perennou.com>.
2013-02-13systemctl: use parse_unit_infoMarc-Antoine Perennou
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
2013-02-13dbus: introduce parse_unit_infoMarc-Antoine Perennou
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
2013-02-13dbus: import struct unit_info from systemctlMarc-Antoine Perennou
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-26 07:45:37 +0000