| Age | Commit message (Collapse) | Author |
|---|
|
This way users have the freedom to set or unset the FS_NOCOW_FL flag on
their journal files by setting it on the journal directory. Since our
default tmpfiles configuration now sets this flag on the directory the
flag is set by default on new files, however people can opt-out of this
by masking the tmpfiles file for it.
|
|
If we get passed an fd that does not refer to a regular file or
directory, we should not issue btrfs ioctls on it, since it might end up
in a device driver or similar (note that DRM for example uses the same
ioctl numbers as some file system ioctls).
Hence, let's make sure to always check if something is a regular file or
directory, or is on btrfs before invoking the respective ioctls. It's
better to be safe than sorry.
|
|
Let's unify the code that checks whether an fd is on btrfs a bit.
(Also, rename btrfs_is_snapshot() to btrfs_is_subvol(), since that's
usually how this is referred to in our code)
|
|
attributes
Before invoking file system ioctls we need to make sure that the
specified fd actually refers to a file system object, and not a device
node or similar. Otherwise we might by accident invoke unrelated device
driver ioctls. For example, DRM ioctls use the same ioctl numbers as the
various file system ioctls.
|
|
This should make the Linux vfat handling less fragile, by unmounting
the idle mount and causing to sync the entire file system to disk.
On my machines, The FAT file system at /boot regularly gets corrupted
with unclean shutdowns, rendering the machines unbootable. Either the
VFS write-back behaviour or the vfat driver itself is just not reliable
enough to be/stay mounted at every bootup.
Because of that, the automount expiry was on top of my personal
wish list. Thanks a lot Michael!
|
|
|
|
kdbus has been passing us the ppid file for a while, actually make use
of it.
|
|
The original idea of systemd.pc was to contain arch-independent system
and systemd information. By exposing libdir as part of the fields (added
in eb39a6239c631873db62f6a942e6cb3dab0a2db4), it started to carry
arch-dependent data, thus breaking multilib systems. It was then moved
to pkgconfiglibdir to deal with this (in
aec432c6134146e138124c4130be2ee89dca07fa), but actually the right
approach is to simply not include libdir in the .pc file at all.
THis patch hence more or less reverts both commits again, and moves the
.pc file back into pkgconfigdatadir.
As alternative for querying the systems primary libdir there's now
"systemd-path system-library-arch", hence a more correct alternative
exists for querying this variable from the .pc file.
|
|
|
|
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=89982
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This makes adds a couple of fixes:
- Introduces log_netdev_error_errno() and friends, which takes an error
number, and matches what log_link_error_errno() and friends do.
- Replaces a lof ot strerror() usage with log_netdev_error_errno(),
log_link_error_errno() and log_erro_errno()
- Uppercases the first character of many log messages, after all this is
supposed to be english language
- Drops manual negating of error codes before passing them to log
functions, the log functions all do that internally anyway.
Some other minor fixes.
Behaviour should not change really.
|
|
with them missing
This way the root subvolume can be left read-only easily, and variable
and user data writable with explicit quota set.
|
|
|
|
the other log functions
|
|
Let's make Coverity happy about this one.
|
|
device
|
|
Rename bond confs and man as well.
[tomegun: dropped a stray comma]
|
|
The atmel driver sets a default resolution of 20 for each touchpads it
creates. On this model, 10 is more appropriate.
The resolution is not set for the touchscreen by the kernel, so match
the name to both touchpad and touchscreen.
|
|
The Lenovo X230 advertize a vertical resolution of 136, which gives a true
size of 31 mm. The actual physical size of the touchpad is 40 mm, so
override the resolution to 100.
|
|
The pointingstick of the Dell Latitude E6400 is somewhat slow by default,
whereas the pointingstick of the Dell Latitude D620 is much too fast by
default, set POINTINGSTICK_CONST_ACCEL for both of them to adjust for this.
|
|
Lenovo has changed the sensitivity of the trackpoint on the x240 / T440s / T540
generation of Thinkpads, making them somewhat insensitive by default, add a
hwdb entry to tweak the sensitivity setting.
The ThinkPad X200s is way way too slow by default and unless you push the
trackpoint quite hard only sends delta events in the 1-2 range, tweak the
sensitivity to make it send a wider range of deltas and apply a const accel
factor to make it have a more reasonable speed by default.
|
|
IBM / Lenovo trackpoints allow specifying a sensitivity setting through a
ps/2 command, which changes the range of the deltas sent when using the
trackpoint.
On some models with normal usage only deltas of 1 or 2 are send, resulting in
there only being 2 mouse cursor movement speeds, rather than the expected fluid
scale. Changing the sensitivity to a higher level than the bootup default fixes
this.
This commit adds support for setting a POINTINGSTICK_SENSITIVITY value
in hwdb to allow changing the sensitivity on boot through udev / hwdb.
|
|
There is quite a wide spread in the delta events generated by pointingsticks,
some generate deltas of 1-2 under normal use, while others generate deltas
from 1-20.
This commit adds a hwdb file which allows specifying a per model
POINTINGSTICK_CONST_ACCEL value which can be used by the userspace input stack
to normalize the deltas so that all pointingsticks get the same feeling ootb.
The hwdb matching re-uses the existing 60-evdev.rules.
|
|
Fedora's filesystem package ships /usr/bin (and other directories) which are
not writable by its owner. machinectl pull-dkr (and possibly others) are not
able to extract those:
14182 mkdirat(3, "usr", 0700) = 0
14182 mkdirat(3, "usr/bin", 0500) = 0
14182 openat(3, "usr/bin/[", O_WRONLY|O_CREAT|O_EXCL|O_NOCTTY|O_NONBLOCK|O_CLOEXEC, 0700) = -1 EACCES (Permission denied)
...
|
|
If there's no remaining process to kill, skip the SIGKILL states if
SIGKILL is disabled.
Effectively this doesn't change much since if there's nothing to kill
with SIGTERM or SIGABRT then there's also nothing to kill with SIGKILL.
However, this avoids confusion with the state engine jumping through
SIGKILL states for no reason...
|
|
|
|
|
|
|
|
|
|
We should always name the object first, the level second, like
everywhere else in the sources.
|
|
|
|
Also, when we do permissions checks using creds, verify that we don't do
so based on augmented creds, as extra safety check.
|
|
is free
|
|
Let's better be safe than sorry.
|
|
known names
|
|
|
|
|
|
|
|
This patch adds configurational support for bond option.
Test conf:
bond.netdev
---
[NetDev]
Name=bond1
Kind=bond
[Bond]
ArpAllTargets=all
PrimaryReselect=better
ArpIntervalSec=10s
ArpIpTargets= 192.168.8.102 192.168.8.101 192.168.8.102
---
$cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: load balancing (round-robin)
MII Status: up
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
ARP Polling Interval (ms): 10000
ARP IP target/s (n.n.n.n form): 192.168.8.100, 192.168.8.101, 192.168.8.102
|
|
Add UDPCheckSum option to enable transmitting UDP checksums when doing
VXLAN/IPv4. Add UDP6ZeroChecksumRx, and UDP6ZeroChecksumTx
options to enable sending zero checksums and receiving zero
checksums in VXLAN/IPv6
[tomegun: rebase manpage due to whitespace changes]
|
|
udevadm manual says:
A value of 0 will check if the queue is empty and always return
immediately.
However, currently we ignore the deadline if the value is 0, and wait
without any limit.
Zero timeout behaved according to the documentation until commit
ead7c62ab7 (udevadm: settle - kill alarm()). Looking at this patch, it
seems that the behavior change was unintended.
This patch restores the documented behavior.
|
|
|
