summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-04-21service: timeout on SIGABRT should also be considered an error to rememberLennart Poettering
2015-04-21service: make more use of IN_SET() macroLennart Poettering
2015-04-21service: list states always in the same orderLennart Poettering
2015-04-21service: make kill operation mapping explicitLennart Poettering
2015-04-21networkd: fix confusion between log_netdev_error() but log_warning_netdev()Lennart Poettering
We should always name the object first, the level second, like everywhere else in the sources.
2015-04-21tmpfiles: consider an argument of "-" as non-specifiedLennart Poettering
2015-04-21sd-bus: when augmenting creds, remember which ones were augmentedLennart Poettering
Also, when we do permissions checks using creds, verify that we don't do so based on augmented creds, as extra safety check.
2015-04-21sd-bus: augmenting cgroups-based creds when we have the cgroup path already ↵Lennart Poettering
is free
2015-04-21sd-bus: when augmenting creds, don't override any creds in any caseLennart Poettering
Let's better be safe than sorry.
2015-04-21sd-bus: when copying creds objects, make sure we copy even the implicit well ↵Lennart Poettering
known names
2015-04-21dhcp6: remove unnecessary if checkLennart Poettering
2015-04-21update TODOLennart Poettering
2015-04-21CODING_STYLE: document how destructors should workLennart Poettering
2015-04-20networkd: Add support for bond option.Susant Sahani
This patch adds configurational support for bond option. Test conf: bond.netdev --- [NetDev] Name=bond1 Kind=bond [Bond] ArpAllTargets=all PrimaryReselect=better ArpIntervalSec=10s ArpIpTargets= 192.168.8.102 192.168.8.101 192.168.8.102 --- $cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 10000 ARP IP target/s (n.n.n.n form): 192.168.8.100, 192.168.8.101, 192.168.8.102
2015-04-20networkd vxlan: Add support for enabling UDP checksumsSusant Sahani
Add UDPCheckSum option to enable transmitting UDP checksums when doing VXLAN/IPv4. Add UDP6ZeroChecksumRx, and UDP6ZeroChecksumTx options to enable sending zero checksums and receiving zero checksums in VXLAN/IPv6 [tomegun: rebase manpage due to whitespace changes]
2015-04-20udev: settle should return immediately when timeout is 0Nir Soffer
udevadm manual says: A value of 0 will check if the queue is empty and always return immediately. However, currently we ignore the deadline if the value is 0, and wait without any limit. Zero timeout behaved according to the documentation until commit ead7c62ab7 (udevadm: settle - kill alarm()). Looking at this patch, it seems that the behavior change was unintended. This patch restores the documented behavior.
2015-04-20util: fix typoRaul Gutierrez S
2015-04-18exit-status: Fix "NOTINSSTALLED" typoMartin Pitt
2015-04-17cryptsetup: Implement offset and skip optionsMartin Pitt
These are useful for plain devices as they don't have any metadata by themselves. Instead of using an unreliable hardcoded device name in crypttab you can then put static metadata at the start of the partition for a stable UUID or label. https://bugs.freedesktop.org/show_bug.cgi?id=87717 https://bugs.debian.org/751707 https://launchpad.net/bugs/953875
2015-04-17sd-device: simplify enumerator hacksDavid Herrmann
Boolean arithmetic is great, use it! if (a && !b) return 1; if (!a && b) return -1, is equivalent to if (a != b) return a - b; Furthermore: r = false; if (condition) r = true; is equivalent to: r = condition;
2015-04-17sd-device: uniformly handle missing devicesTom Gundersen
sd_device_new_from_* now returns -ENODEV when the device does not exist, and the enumerator silently drops these errors as missing devices is exepected.
2015-04-17sd-device: enumerator - match only on initialized devices by defaultTom Gundersen
It is still possible to include uninitialized ones, but now that is opt-in. In most cases people only want initialized devices. Exception is if you want to work without udev running. Suggested by David Herrmann.
2015-04-17sd-device: enumerator - don't expose add_device()Tom Gundersen
This is rarely, if ever, used. Drop it from the new public API and only keep it for the legacy API. Suggested by David Herrmann.
2015-04-16libudev: make libudev-enumerate a thin wrapper around sd-deviceTom Gundersen
2015-04-16sd-device: add device-enumerator libraryTom Gundersen
2015-04-16shared: move assert_return_errno() from libudevTom Gundersen
This should not be used for any new code, as we don't set errno in new code, but there are several legacy users, so let's keep it in shared.
2015-04-16sd-bus: add more comments to the credential decision logicLennart Poettering
2015-04-16core: fix spurious warning about cpuacct-usage-base deserializationZbigniew Jędrzejewski-Szmek
The key was parsed properly, but the warning was still generated.
2015-04-15udev-builtin-usb_id: fix inverted conditionZbigniew Jędrzejewski-Szmek
Fix for 4beac74e69. Thanks, Ronny!
2015-04-14selinux: use different log priorites for log messagesZbigniew Jędrzejewski-Szmek
When selinux calls our callback with a log message, it specifies the type as AVC or INFO/WARNING/ERROR. The question is how to map this to audit types and/or log priorities. SELINUX_AVC maps to AUDIT_USER_AVC reasonably, but for the other messages we have no idea, hence we use AUDIT_USER_AVC for everything. When not using audit logging, we can map those selinux levels to LOG_INFO/WARNING/ERROR etc. Also update comment which was not valid anymore in light of journald sucking in audit logs, and was actually wrong from the beginning — libselinux uses the callback for everything, not just avcs. This stemmed out of https://bugzilla.redhat.com/show_bug.cgi?id=1195330, but does not solve it.
2015-04-14systemctl: avoid bumping NOFILE rlimit unless neededZbigniew Jędrzejewski-Szmek
We actually only use the journal when showing status. Move setrlimit call so it is only called for status. https://bugzilla.redhat.com/show_bug.cgi?id=1184712
2015-04-14sd-device: fix typoZbigniew Jędrzejewski-Szmek
2015-04-14udev-builtin-usb_id: simplificationZbigniew Jędrzejewski-Szmek
2015-04-14test-dhcp6-client: don't unref the event twiceThomas Hindoe Paaboel Andersen
2015-04-14sd-dhcp6-client: unref lease when freeing the clientThomas Hindoe Paaboel Andersen
2015-04-14sd-devcie: fix typoTom Gundersen
2015-04-14sd-device: fix reading of subsystemTom Gundersen
2015-04-14sd-device: allow uevent files to be write-onlyTom Gundersen
2015-04-14udev: downgrade a few warnings to debug messagesLennart Poettering
https://bugs.freedesktop.org/show_bug.cgi?id=89885
2015-04-14input_id: Identify scroll-wheel device on Trust TB7300 tablet as keyboardHans de Goede
The Trust TB7300 (relabelled Waltop?) tablet has a scrollwheel which shows up as a /dev/input/event# node all by itself. Currently input_id does not set any ID_INPUT_FOO attr on this causing it it to not be recognized by Xorg / libinput. This commit fixes this by marking it with ID_INPUT_KEY. Reported-by: Sjoerd Timmer <themba@randomdata.nl>
2015-04-14udev: input_id: Make test_pointer / test_keys return if they've found anythingHans de Goede
Make test_pointer / test_keys return a boolean indicating whether or not they've set any properties on the device.
2015-04-14udev: input_id: whitespace fixesPeter Hutterer
Remove whitespaces before opening parentheses, mostly before test_bit.
2015-04-13test-ipv4ll: clean up the eventThomas Hindoe Paaboel Andersen
shuts up valgrind/sanitizers
2015-04-13tmpfiles: Add +C attrib to the journal files directoriesGoffredo Baroncelli
Add the +C file attribute (NOCOW) to the journal directories, so that the flag is inherited automatically for new journal files created in them. The journal write pattern is problematic on btrfs file systems as it results in badly fragmented files when copy-on-write (COW) is used: the performances decreases substantially over time. To avoid this issue, this tmpfile.d snippet sets the NOCOW attribute to the journal files directories, so newly created journal files inherit the NCOOW attribute that disables copy-on-write. Be aware that the NOCOW file attribute also disables btrfs checksumming for these files, and thus prevents btrfs from rebuilding corrupted files on a RAID filesystem. In a single disk filesystems (or filesystems without redundancy) it is safe to use the NOCOW flags without drawbacks, since the journal files contain their own checksumming.
2015-04-13update TODOLennart Poettering
2015-04-13man: slightly fewer paragraphs can help readabilityLennart Poettering
2015-04-13man: fix examples indentation in tmpfiles.d(5)Lennart Poettering
2015-04-13man: add information about more lines to explanation of argument fieldLennart Poettering
2015-04-13man: document which tmpfiles line types follow symlinksLennart Poettering
Generally, we will not follow symlinks, except for "w". Avoid documentation for now for fifo, device node, directory lines, which currently follow symlinks but better shouldn't.
2015-04-13tmpfiles: don't follow symlinks when adjusting ACLs, fille attributes, ↵Lennart Poettering
access modes or ownership