~lukeshu/systemd - Unnamed repository; edit this file 'description' to name the repository.

Age	Commit message (Collapse)	Author
2014-06-19	dhcp-server: simplify dhcp server unref call	Lennart Poettering
	No need to use HASHMAP_ITERATE when we destruct all entries anyway.
2014-06-18	TODO: update	Thomas Hindoe Paaboel Andersen

2014-06-18	socket: check return from exec_spawn	Thomas Hindoe Paaboel Andersen

2014-06-18	sd-dhcp-client: check return from dhcp_option_append	Thomas Hindoe Paaboel Andersen

2014-06-18	sd-dhcp-server: fix a leak	Thomas Hindoe Paaboel Andersen
	We must use free instead of dhcp_lease_free here to avoid freeing client_id.data.
2014-06-18	network: automatically assign each container veth link a /28 IP address range	Lennart Poettering

2014-06-18	networkd: configure dhcp server range only after successfully setting an IP ↵	Lennart Poettering
	address on the interface This way we can make use of the addresses of the IP pool.
2014-06-18	networkd: add address pool support	Lennart Poettering
	When an address is configured to be all zeroes, networkd will now automatically find a locally unused network of the right size from a list of pre-configured pools. Currently those pools are 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16 and fc00::/7, i.e. the network ranges for private networks. They are compiled in, but should be configurable eventually. This allows applying the same configuration to a large number of interfaces with each time a different IP range block, and management of these IP ranges is fully automatic. When allocating an address range from the pool it is made sure the range is not used otherwise.
2014-06-18	networkd: add a number of calls to manipulate in_addr_union structs	Lennart Poettering

2014-06-18	socket-util: introduce in_addr_union similar to sockaddr_union and make use ↵	Lennart Poettering
	of it everywhere
2014-06-18	dhcp-network: remove TODO	Michal Sekletar
	There is no need to explicitly check version of L3 protocol in the ethernet header because we bind socket with .sll_protocol set to ETH_P_IP, thus we only receive IPv4 packets on the socket.
2014-06-18	hwdb: Update database of Bluetooth company identifiers	Marcel Holtmann

2014-06-18	TODO: update	Kay Sievers

2014-06-18	rules: add loop-control and btrfs-control to "disk" group	Kay Sievers

2014-06-18	cryptsetup: introduce new cryptsetup-pre.traget unit so that services can ↵	Lennart Poettering
	make sure they are started before and stopped after any LUKS setup https://bugzilla.redhat.com/show_bug.cgi?id=1097938
2014-06-18	tmpfiles: create directories already with the right label, instead of ↵	Lennart Poettering
	creating them first, and relabeling them afterwards
2014-06-18	tmpfiles: w lines should allow following symlinks	Lennart Poettering

2014-06-18	update TODO	Lennart Poettering

2014-06-18	namespace: properly label device nodes we create	Lennart Poettering
	https://bugzilla.redhat.com/show_bug.cgi?id=1081429
2014-06-18	tmpfiles: add "+" modifier support to b, c, p lines in addition to L	Lennart Poettering

2014-06-17	man: fix typo	Zbigniew Jędrzejewski-Szmek

2014-06-17	build-sys: add missing backslash	Ronny Chevalier

2014-06-17	networkd: veth - fix parsing verification	Tom Gundersen

2014-06-17	networkd: vxlan - fix parsing verification	Tom Gundersen

2014-06-17	networkd: veth - fix memleak	Tom Gundersen

2014-06-17	install: remove unused variable	Thomas Hindoe Paaboel Andersen

2014-06-17	tmpfiles: remove line for automatic clean-ups for /var/cache/man/	Lennart Poettering
	Management of /var/cache/man should move to the distribution package owning the directory (for example, man-db). As man pages are a non-essential part of the system and unnecessary for minimal setups, there's no point in having systemd ship these lines. Distribution packages should make sure the appropriate package for their distribution adopts this line. Ideally, the line is adopted by the upstream package. For Fedora I have filed this bug: https://bugzilla.redhat.com/show_bug.cgi?id=1110274
2014-06-17	bootchart: set white background	Frederic Crozat
	In programs like eog and gimp the transparant background did not look very good. Similar fix from the one done in systemd-analyze (418e3750)
2014-06-17	networkd: link - fix carrier check on new link	Tom Gundersen
	We were comparing against our own internal enum rather than the kernel exposed one. Found by Thomas Ritter.
2014-06-17	sd-dhcp: checksum - make endianess-neutral	Tom Gundersen
	For efficiency, we group bytes together before adding them up. This is guaranteed to always work (regardless of the byte order) as long as the i-th byte in each group lign up with the i-th byte in each other group. On big-endian machines this broke when handling the trailing few bytes which did not make up a full group of 4 bytes. This patch fixes the problem by explicitly creating a 4 byte zero-padded group out of the trailing bytes. Reported and tested by Thomas Ritter <th.ritter@gmx.at>.
2014-06-16	systemctl: reverse order of args when verbosely creating symlinks	Dave Reisner
	This was backwards. The symlink itself points to the source unit, not the other way around.
2014-06-17	timesyncd: do not start in virtualized environments	Kay Sievers

2014-06-17	update TODO	Lennart Poettering

2014-06-17	core: populate unit file set with preset data if we boot with empty /etc	Lennart Poettering

2014-06-17	machine-id-setup: allow passing NULL as function argument, for simplicity	Lennart Poettering

2014-06-17	kmod: conditionalize kmod setup on CAP_SYS_MODULE, not whether we run in a ↵	Lennart Poettering
	container It's generally preferrable to conditionalize on the actual ability to do something then the context we run in.
2014-06-17	build-sys: touch /usr on "make install"	Lennart Poettering
	this way, the "make install" will be detected as offline update on next boot.
2014-06-17	units: minor cleanups	Lennart Poettering

2014-06-17	install: improve paths we show the user when enabling/disabling	Lennart Poettering

2014-06-17	networkd: don't pull in systemd-networkd-wait-online service from ↵	Lennart Poettering
	systemd-networkd when enabling networkd-wait-online should never exist in the default transaction, unless explicitly enable or pulled in via things like NFS. However, just enabling networkd shouldn't enable networkd-wait-online, since it's common to use the former without the latter.
2014-06-17	conf-files: fix when for --root= logic	Lennart Poettering
	This is based on parts of similar patches from Michael Marineau and Lukas Nykrin, but simply uses strappenda3().
2014-06-17	systemctl: output human readable strings in "systemctl enable" and ↵	Lennart Poettering
	"systemctl disable"
2014-06-17	install: simplify symlink --root= logic	Lennart Poettering

2014-06-17	install: "systemctl enable" should be a nop for template units lacking a ↵	Lennart Poettering
	DefaultInstance= setting
2014-06-17	preset: ship a minimal preset file upstream	Lennart Poettering
	This is useful so that distros have something to base their own policy of. It also useful to make sure that minimal installs always get useful configuration in place.
2014-06-17	log: don't downgrade log level in non-PID 1 if "quiet" is passed on kernel ↵	Lennart Poettering
	cmdline "debug" should apply to all tools, but "quiet" only to PID1.
2014-06-17	install: make sure that --root= mode doesn't make us consider all units ↵	Lennart Poettering
	outside of search path
2014-06-17	install: make sure "systemctl disable foobar@.service" actually removes all ↵	Lennart Poettering
	instances
2014-06-17	install: introduce new DefaultInstance= field for [Install] sections	Lennart Poettering
	The DefaultInstance= name is used when enabling template units when only specifying the template name, but no instance. Add DefaultInstance=tty1 to getty@.service, so that when the template itself is enabled an instance for tty1 is created. This is useful so that we "systemctl preset-all" can work properly, because we can operate on getty@.service after finding it, and the right instance is created.
2014-06-17	install: when looking for a unit file for enabling, search for templates ↵	Lennart Poettering
	only after traversing all search directories Let's always make sure to look in all search directories for the full unit names first, before looking for templates for them.