| Age | Commit message (Collapse) | Author |
|---|
|
Fixes: #4987
|
|
The service is supposed to regenerate the catalog index whenever /usr is
updated, but /var is not. Hence the ConditionNeedsUpdate= line should
actually reference /var, as that's where the index file is located.
|
|
man: document that "systemd-run -M" propagates exit codes, and "machi…
|
|
shell" does not
This adds a brief explanation, suggesting the use of "systemd-run -M" to
acquire exit status/code information for the invoked process.
My original plan was to propagate the exit code/status in "machinectl
shell" too, but this would mean we'd have to actively watch the shell's
runtime status, and thus would need full, highly privileged and
continious access to the container's system manager, the way
"systemd-run" does it. This would be quite a departure from the
simplistic, low-priviliged OpenShell() bus call implementation of the
current code, that really just acquires a PTY device with a shell
connected.
Moreover it would blur the lines between the two commands even further,
which I think is not desirable. Hence, from now on:
"machinectl shell" is the full-session, interactive shell for human
users
"systemd-run -M …" is the low-level tool, that supports
on-interactive mode, and is more configurable and suitable for
streaming.
Fixes: #4215
|
|
In test_resolved_domain_restricted_dns(), add dot domain separator to
negative .lab/.company tests, so that we don't catch these as part of
the host name (like "lxc-labjfr").
Caught in PR #4962
|
|
"%d (%m) %s\n" crashes asan: https://github.com/google/sanitizers/issues/759
So, let's place %m after %s
Fixes:
```
$ ./libtool --mode=execute ./test-selinux
...
============ test_misc ==========
ASAN:DEADLYSIGNAL
=================================================================
==2981==ERROR: AddressSanitizer: SEGV on unknown address 0x000041b58ab3 (pc 0x7fd9c55a0eb2 bp 0x7fffdc2f9640 sp 0x7fffdc2f8d68 T0)
#0 0x7fd9c55a0eb1 (/lib64/libasan.so.3+0xdeeb1)
#1 0x7fd9c5550bbf (/lib64/libasan.so.3+0x8ebbf)
#2 0x7fd9c5552cdd in __interceptor_vsnprintf (/lib64/libasan.so.3+0x90cdd)
#3 0x7fd9c5063715 in log_internalv src/basic/log.c:680
#4 0x7fd9c506390a in log_internal src/basic/log.c:697
#5 0x561d398181a2 in test_misc src/test/test-selinux.c:81
#6 0x561d398185e8 in main src/test/test-selinux.c:117
#7 0x7fd9c493a400 in __libc_start_main (/lib64/libc.so.6+0x20400)
#8 0x561d39817859 in _start (/home/vagrant/systemd-asan/.libs/lt-test-selinux+0x1859)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV (/lib64/libasan.so.3+0xdeeb1)
==2981==ABORTING
```
|
|
Print addresses returns EOPNOTSUPP, not ENOSYS, when trying to print
addresses for non-container machines.
|
|
|
|
The manpage claimed that ExecStop would be followed immediately by
SIGKILL, whereas the actual behavior is to go through KillMode= and
KillSignal= first.
Fixes #4490
|
|
The journalctl man page says: "-m, --merge Show entries interleaved from all
available journals, including remote ones.", but current version of journalctl
doesn't live up to this promise. This patch simply adds
"/var/log/journal/remote" to search path if --merge flag is used.
Should fix issue #3618
|
|
|
|
Fixes: #4914
|
|
|
|
Add Microsoft Surface Mouse DPI
|
|
Rename the arp proxy option to IPv4ProxyARP= in order to clarify
its relationship to IPv4, and map to the various IPv6 options we have.
Fixes: #4768
|
|
Fixes #4938
|
|
Fix wrong condition test in manager_etc_hosts_lookup(), which caused it to
return an IPv4 answer when an IPv6 question was asked, and vice versa.
Also only return success if we actually found any A or AAAA record.
In systemd-resolved.service(8), point out that /etc/hosts mappings only
affect address-type lookups, not other types.
The test case currently disables DNSSEC in resolved, as there is a bug
where "-t MX" fails due to "DNSSEC validation failed" even after
"downgrading to non-DNSSEC mode". This should be dropped once that bug
gets fixed.
Fixes #4801
|
|
|
|
active_slave:
Specifies the new active slave for modes that support it
(active-backup, balance-alb and balance-tlb).
primary slave:
systemd-networks currently lacks the capability to set the primary slave
in an
active-backup bonding. This is necessary if you prefer one interface
over the
other. A common example is a eth0-wlan0 bonding on a laptop where you'd
want to
switch to the wired connection whenever it's available.
Fixes: #2837
|
|
Fixes: #4768
|
|
Fixes:
```
sudo ./libtool --mode=execute valgrind --leak-check=full ./systemd-nspawn -D ./CONT/ -b
...
==21224== 2,444 (656 direct, 1,788 indirect) bytes in 1 blocks are definitely lost in loss record 13 of 15
==21224== at 0x4C2FA50: calloc (vg_replace_malloc.c:711)
==21224== by 0x4F6F565: sd_event_new (sd-event.c:431)
==21224== by 0x1210BE: run (nspawn.c:3351)
==21224== by 0x123908: main (nspawn.c:3826)
==21224==
==21224== LEAK SUMMARY:
==21224== definitely lost: 656 bytes in 1 blocks
==21224== indirectly lost: 1,788 bytes in 11 blocks
==21224== possibly lost: 0 bytes in 0 blocks
==21224== still reachable: 8,344 bytes in 3 blocks
==21224== suppressed: 0 bytes in 0 blocks
```
Closes #4934
|
|
calendarspec: improve overflow handling
|
|
|
|
Check if the parsed seconds value fits in an integer *after*
multiplying by USEC_PER_SEC, otherwise a large value can trigger
modulo by zero during normalization.
|
|
- linux does not accept prefixes for SLAAC unequal to 64 bits: http://lxr.free-electrons.com/source/net/ipv6/addrconf.c#L2741
- when networkd tries export such a route to the kernel it will get -EINVAL and
set the whole device into a failed state.
- this patch will make networkd ignore such prefixes for SLAAC,
but process other informations which may contain other prefixes.
- Note that rfc4862 does not forbid prefix length != 64 bit
|
|
Make it easier to figure out how to use the journalctl export format.
|
|
calendarspec: allow repetition values with ranges
|
|
Core was generated by `systemctl cat test@.target test@.service'.
Program terminated with signal SIGSEGV, Segmentation fault.
32 movdqu (%rdi), %xmm0
(gdb) bt
-0 strrchr () at ../sysdeps/x86_64/strrchr.S:32
-1 0x00007f57fdf837fe in __GI___basename (filename=0x0) at basename.c:24
-2 0x000055b8a77d0d91 in unit_find_paths (bus=0x55b8a9242f90, unit_name=0x55b8a92428f0 "test@.service", lp=0x7ffdc9070400, fragment_path=0x7ffdc90703e0, dropin_paths=0x7ffdc90703e8) at src/systemctl/systemctl.c:2584
-3 0x000055b8a77dbae5 in cat (argc=3, argv=0x7ffdc9070678, userdata=0x0) at src/systemctl/systemctl.c:5324
-4 0x00007f57fe55fc6b in dispatch_verb (argc=5, argv=0x7ffdc9070668, verbs=0x55b8a77f1c60 <verbs>, userdata=0x0) at src/basic/verbs.c:92
-5 0x000055b8a77e477f in systemctl_main (argc=5, argv=0x7ffdc9070668) at src/systemctl/systemctl.c:8141
-6 0x000055b8a77e5572 in main (argc=5, argv=0x7ffdc9070668) at src/systemctl/systemctl.c:8412
The right behaviour is not easy in this case. Implement some "sensible" logic.
Fixes #4912.
|
|
Instead, document the necessary step to utilize older dbus versions.
|
|
Hwdb updates
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1402596
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=98844
|
|
|
|
At least bird's implementation of router advertisement does not
set MTU option by default (instead it supplies an option to the user).
In this case just leave MTU as it is.
|
|
We currently don't expect any warnings about format strings, on any
architecture (#4612 removed the last few warnings). Turn those warnings into
errors in the future.
As requested by Martin Pitt.
gcc documentation says that -Wformat=2 includes -Wformat-security and
-Wformat-nonliteral so don't include them explicitly.
|
|
build-sys: stop placing D-Bus policy below /etc
|
|
That message is emitted by every systemd instance on every resume:
Dec 06 08:03:38 laptop systemd[1]: Time has been changed
Dec 06 08:03:38 laptop systemd[823]: Time has been changed
Dec 06 08:03:38 laptop systemd[916]: Time has been changed
Dec 07 08:00:32 laptop systemd[1]: Time has been changed
Dec 07 08:00:32 laptop systemd[823]: Time has been changed
Dec 07 08:00:32 laptop systemd[916]: Time has been changed
-- Reboot --
Dec 07 08:02:46 laptop systemd[836]: Time has been changed
Dec 07 08:02:46 laptop systemd[1]: Time has been changed
Dec 07 08:02:46 laptop systemd[926]: Time has been changed
Dec 07 19:48:12 laptop systemd[1]: Time has been changed
Dec 07 19:48:12 laptop systemd[836]: Time has been changed
Dec 07 19:48:12 laptop systemd[926]: Time has been changed
...
Fixes #4896.
|
|
A few simple fixes / improvements
|
|
|
|
691b90d465 fixed one spot, but missed the other one.
|
|
|
|
Also free the allocated memory before exiting.
|
|
|
|
This means that callers can distiguish an error from flags==0,
and don't have to special-case the empty string.
|
|
Various smaller fixes
|
|
Even if pressing Ctrl-c after spawning gdb with "coredumpctl gdb" is not really
useful, we should let gdb handle the signal entirely otherwise the user can be
suprised to see a different behavior when gdb is started by coredumpctl vs when
it's started directly.
Indeed in the former case, gdb exits due to coredumpctl being killed by the
signal.
So this patch makes coredumpctl ignore SIGINT as long as gdb is running.
|
|
We should also mention this in NEWS before release. Suggested text:
> DBus policy files are now installed into /usr rather than /etc. Make sure
> your system has dbus = 1.9.18 running before upgrading to this version, or
> override the install path with --with-dbuspolicydir=
|
|
|
|
value/range_end -> start/stop
|
