| Age | Commit message (Collapse) | Author |
|---|
|
We don't care about timestamps down to the last usec, round to the closest sec
as that will be plenty for debugging purposes.
|
|
Add compare_func and hash_func for the Address object. The notion of
address equality is the same as in the kernel, and hashing preserves
preserves equality.
Two addresses are considered equal if:
- they have the same address family, and
- they are neither IPv4 nor IPv6 addresses, or
- the local addresses are identical, and
- they are IPv6 addresses, or
- they have the same prefixlength, and
- their peer prefixes are identical
This fixes a bug in the old equality check, which got the local address
and the peer prefix mixed up.
|
|
Freeing links/addresses may trigger sending signals over the bus, so let's make sure
the bus stays around until our own objects have been freed.
|
|
Rename new_dynamic() to simply _new() and reuse that from new_static().
|
|
Existing test would use highly-compressible repeatable
input. Two types of input are added:
- zeros
- random blocks interspersed with zeros
The idea is to get more information about behaviour in various cases.
On Intel Xeon the results are:
% ./test-compress-benchmark
XZ/zeros: compressed & decompressed 2535301373 bytes in 32.56s (74.26MiB/s), mean compresion 99.96%, skipped 3160 bytes
LZ4/zeros: compressed & decompressed 2535304362 bytes in 1.16s (2088.69MiB/s), mean compresion 99.60%, skipped 171 bytes
XZ/simple: compressed & decompressed 2535300963 bytes in 30.42s (79.48MiB/s), mean compresion 99.95%, skipped 3570 bytes
LZ4/simple: compressed & decompressed 2535303543 bytes in 1.22s (1978.86MiB/s), mean compresion 99.60%, skipped 990 bytes
XZ/random: compressed & decompressed 381756649 bytes in 60.02s (6.07MiB/s), mean compresion 39.64%, skipped 27813723 bytes
LZ4/random: compressed & decompressed 2507385036 bytes in 0.97s (2477.52MiB/s), mean compresion 54.77%, skipped 27919497 bytes
If someone has ideas for more realistic test cases, they can be easily
added to this framework.
|
|
This converts the stream compression to use the new lz4frame api,
compatible with lz4cat. Previous code used custom headers, so the
compressed file was not compatible with lz4 command line tools.
I considered this the last blocker to using lz4 by default.
Speed seems to be reasonable, although a bit (a few percent) slower
than the lz4 binary, even though compression is the same. I don't
consider this important. It could be caused by the overhead of library
calls, but is probably caused by slightly different buffer sizes or
such. The code in this patch uses mmap, since since this allows the
buffer to be reused while not making the code more complicated at all.
In my testing, this version is noticably faster (~20%) than a naive
single-buffered version. mmap can cause the program to be killed with
SIGBUS, if the underlying file is truncated or a disk error occurs. We
only use this from within coredump and coredumpctl, so I don't
consider this an issue.
Old decompression code is retained and is used if the new code fails
indicating a format error. There have been reports of various smaller
distributions using previous lz4 code, i.e. the old format, and it is
nice to provide backwards compatibility. We can remove the legacy code
in a few versions.
The way that blobs are compressed in the journal is not affected.
|
|
The new frame api was released in v. 125.
|
|
catalog: added systemd.da.catalog
|
|
|
|
nspawn: create /sys/fs/cgroup for unified hierarchy as well
|
|
Don't isolate `-.slice`
|
|
Otherwise, we might end up trying to isolate it away when starting user
instances.
While we are at it, also prohibit manual start/stop of these two units.
Fixes: #1507
|
|
No change in behaviour, just make the code more obvious.
|
|
We already stop boot if /etc/mtab is not a symlink right now, and most
likely we'll stop referecing it at all in the future, either way there's
no point in keeping it around as taint flag.
|
|
The file is obsolete, use /proc/self/mounts instead.
Also, yuck, the code is so awful...
|
|
systemd-run can launch units with SyslogIdentifier and SyslogLevelPrefix
|
|
Make sure the mount units pulled by 'RequiresMountsFor=' are loaded, if they exist
|
|
|
|
|
|
|
|
|
|
|
|
shell-completion: systemd-run: add new properties
|
|
See:
* 602b83559a7cfcd3eee05
* b9c50073fcc1460ca1ff3
|
|
exist)
We should make sure that mount units involved by 'RequiresMountsFor='
directives are really loaded if not required by any others units so
that Requires= dependencies on the mount units are applied and thus
the mount unit dependencies are started.
|
|
core: system.conf: add DefaultTasksAccounting
|
|
|
|
allow passing in fds for stdin/stdout/stderr for transient services
|
|
lldp: rename publicly visible structure
|
|
Rename struct 'tlv_packet' to 'sd_lldp_packet' and struct
'tlv_section' to 'sd_lldp_section' since the former is referenced in
public header sd-lldp.h.
Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
|
|
|
|
core: manager: add some missing properties
|
|
networkd-link: remove unused variable assignment in link_save()
|
|
Including a fix for properly freeing a calendarspec object after use.
|
|
|
|
|
|
Before, we'd always reset acquired terminals, which is not really
desired, as we expose a setting TTYReset= which is supposed to control
whether the TTY is reset or not. Previously that setting would only
enable a second resetting of the TTY, which is of course pointless...
Hence, move the implicit resetting out of acquire_terminal() and make
the callers do it if they need it.
|
|
With this change we'll open the shell's tty right from machined and then
pass it to the transient unit we create. This way we make sure the pty
is opened exactly as long as the transient service is around, and no
longer, and vice versa. This way pty forwarders do not have to deal with
EIO problems due to vhangup, as the pty is open all the time from the
point we set things up to the point where the service goes away.
|
|
fixes Coverity #1317207
|
|
When starting a transient service, allow setting stdin/stdout/stderr fds
for it, by passing them in via the bus.
This also simplifies some of the serialization code for units.
|
|
|
|
|
|
po: added danish translation
|
|
po: added danish translation for systemd
Update da.po
fixed syntax errors
|
|
|
|
Follow-up commit to e1fd19958: Add d8 scan code as well.
Fixes #1440
|
|
machinectl shell race fix
|
|
|
|
Previously, we'd allocate the TTY, spawn a service on it, but
immediately start processing the TTY and forwarding it to whatever the
commnd was started on. This is however problematic, as the TTY might get
actually opened only much later by the service. We'll hence first get
EIOs on the master as the other side is still closed, and hence
considered it hung up and terminated the session.
With this change we add a flag to the pty forwarding logic:
PTY_FORWARD_IGNORE_INITIAL_VHANGUP. If set, we'll ignore all hangups
(i.e. EIOs) on the master PTY until the first byte is successfully read.
From that point on we consider a hangup/EIO a regular connection termination. This
way, we handle the race: when we get EIO initially we'll ignore it,
until the connection is properly set up, at which time we start
honouring it.
|
|
The child process is shortliving, hence always set O_NOCTTY so that the
tty doesn't quickly become controlling TTY and then gives it up again.
Also set O_CLOEXEC, because it's cleaner, and doesn't affect the parent
anyway.
|
