summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-17core, libsystemd, systemd, timedate, udev: spelling fixesMiklos Vajna
2014-03-17man: improve wording of systemctl's --after/--beforeJason St. John
Commit 4a77ca7 was an attempt at fixing the wording of --after and --before, but the new wording was unclear. Split the combined --after/--before section into a separate section for each, explicitly state what each option does, and add information about how these lists are generated. Reported-by: Andrey Borzenkov <arvidjaar@gmail.com> Reported-by: Lennart Poettering <lennart@poettering.net>
2014-03-17build-sys: bump required µhttpd versionZbigniew Jędrzejewski-Szmek
MHD_USE_EPOLL_LINUX_ONLY, MHD_USE_DUAL_STACK are only available in next-but-last release.
2014-03-17journal-remote: implement inheriting http(s) socketsZbigniew Jędrzejewski-Szmek
Now --listen-http=-3 --listen-https=-4 can be used to spawn a µhttpd server on those two ports, in http and https modes respectively. As before, --listen-http=3 --listen-https=4 will launch µhttpd servers on ports 3 and 4.
2014-03-17microhttpd-util: use static buffer for static messagesZbigniew Jędrzejewski-Szmek
Most of the messages we send do not require a allocating and freeing a buffer, to optimize this by using const strings. Also, rename respond_error to mhd_respond*, since it is used not only for errors. Make use of information from printf to avoid one extra call to strlen.
2014-03-17journal-remote: HTTP(s) supportZbigniew Jędrzejewski-Szmek
The whole tool is made dependent on µhttpd availability. It should be easy to make the µhttpd parts conditional, but since transfer over HTTP seems to be the primary use case, currently this is not done. Current implementation uses nested epoll loops: sd-event is used for the external event loop, and µhttpd uses epoll in its own loop. Unfortunately µhttpd does not expose enough information to add the descriptors it uses to the external event loop. This means that starvation of other events is possible, if one of the inner µhttpd loops is constantly busy. This means that µhttpd servers should not be mixed with other sources. The TLS authentication parts haven't been really tested properly, and should not be take too seriously.
2014-03-17journal-remote: tool to receive messages over the networkZbigniew Jędrzejewski-Szmek
2014-03-17journal-gatewayd: check if certificate is signed by CAZbigniew Jędrzejewski-Szmek
If --trust=ca.crt is used, only clients presenting certificates signed by the ca will be allowed to proceed. No hostname matching is performed, so any client wielding a signed certificate will be authorized. Error functions are moved from journal-gateway to microhttp-util and made non-static, since now they are used in two source files.
2014-03-17journal-gatewayd: log to journal from gnutlsZbigniew Jędrzejewski-Szmek
Prefix "gnutls: " is added. Some semi-random mapping of gnutls levels to syslog levels is done, but since gnutls levels seem to be used rather loosely, most end up as debug.
2014-03-17build-sys: add check on gnutlsZbigniew Jędrzejewski-Szmek
2014-03-17journal-gatewayd: ask clients to provide certificatesZbigniew Jędrzejewski-Szmek
A certificate authority certificate will be presented to clients, causing them to present their client certificate, if it is signed by this authority (default behaviour of most clients). No certificate checking is actually performed.
2014-03-17activate: export make_socket_fdZbigniew Jędrzejewski-Szmek
Also improve logging to print out the parsed address on error.
2014-03-17shared: export is_dirZbigniew Jędrzejewski-Szmek
2014-03-17journal: export valid_user_field and size definesZbigniew Jędrzejewski-Szmek
In preparation for use elsewhere.
2014-03-17journal: extract duplicated code to a functionZbigniew Jędrzejewski-Szmek
2014-03-17journal: extract duplicated code to a functionZbigniew Jędrzejewski-Szmek
2014-03-17journald: remove stray reset of error return valueZbigniew Jędrzejewski-Szmek
2014-03-17systemctl: introduce -r switch to show units running in local containers in ↵Lennart Poettering
addition to the host
2014-03-17timedated: move test logging to test programKay Sievers
2014-03-16timedated: update spike handlingKay Sievers
2014-03-16timedated: update spike handlingKay Sievers
2014-03-16timedated: handle external system time changesKay Sievers
2014-03-16Use strlen even for constant stringsJosh Triplett
GCC optimizes strlen("string constant") to a constant, even with -O0. Thus, replace patterns like sizeof("string constant")-1 with strlen("string constant") where possible, for clarity. In particular, for expressions intended to add up the lengths of components going into a string, this often makes it clearer that the expression counts the trailing '\0' exactly once, by putting the +1 for the '\0' at the end of the expression, rather than hidden in a sizeof in the middle of the expression.
2014-03-16nspawn: UP the host side of the veth pair after adding it to a bridgeTom Gundersen
2014-03-16sd-rtnl: never treat broadcasts as repliesTom Gundersen
Otherwise the sequence number of a broadcast may match the sequence number of a pending unicast message and cause confusion.
2014-03-15networkd: netdev - support joining already existing netdevsTom Gundersen
2014-03-15sd-rtnl: make RTM_NEWLINK report EEXIST by defaultTom Gundersen
Use RTM_SETLINK to update an existing link.
2014-03-15timedated: print delay and jitter in debug outputKay Sievers
2014-03-15_sd_machines: Use machinectl --no-legendWieland Hoffmann
Otherwise bogus entries from the header and footer would show up in the completion list.
2014-03-15zsh completion: Install _sd_machines with _machinectlWieland Hoffmann
_machinectl uses _sd_machines to provide a list of all available machines.
2014-03-14timedated: use builtins for integer log and expZbigniew Jędrzejewski-Szmek
2014-03-14journald: add support for wall forwardingSebastian Thorarensen
This will let journald forward logs as messages sent to all logged in users (like wall). Two options are added: * ForwardToWall (default yes) * MaxLevelWall (default emerg) 'ForwardToWall' is overridable by kernel command line option 'systemd.journald.forward_to_wall'. This is used to emulate the traditional syslogd behaviour of sending emergency messages to all logged in users.
2014-03-14utmp-wtmp: allow overriding username on wallSebastian Thorarensen
utmp_wall() now takes an optional argument 'username_override' which allows the caller to override the username shown on wall messages. journald will use this to inform users that its wall messages comes from 'systemd-journald'.
2014-03-14sd-bus: don't choke if somebody sends us a message with a unix fd count of 0Lennart Poettering
It's kinda pointless to include a unix fd header field in messages if it carries the value 0, but let's do this anyway...
2014-03-14sd-bus: don't access invalid memory if a signal matcher was freed from its ↵Lennart Poettering
own callback
2014-03-14util: add hexdump() call to create pretty hexdumps of dataLennart Poettering
This is very useful when debugging sd-bus to look at messages.
2014-03-14update TODOLennart Poettering
2014-03-14networkd: fix typoMichael Olbrich
It's HAVE_SPLIT_USR not HAVE_SPLIT_USER
2014-03-14gpt: introduce root partition type GUIDs for ARM 32bit + ARM 64bitLennart Poettering
2014-03-14tmpfiles: add --root option to operate on an alternate fs treeMichael Marineau
This makes it possible to initialize or cleanup an arbitrary filesystem hierarchy in the same way that it would be during system boot.
2014-03-14shared: add root argument to search_and_fopenMichael Marineau
This adds the same root argument to search_and_fopen that conf_files_list already has. Tools that use those two functions as a pair can now be easily modified to load configuration files from an alternate root filesystem tree.
2014-03-14Do not return -1 (EINVAL) on allocation errorZbigniew Jędrzejewski-Szmek
2014-03-14machine-id-setup: use path_kill_slashes and modernizationsZbigniew Jędrzejewski-Szmek
2014-03-14man: network - clarify which options may be specified more than once.Tom Gundersen
2014-03-14machine-id: add --root option to operate on an alternate fs treeGreg KH
This makes it possible to initialize the /etc/machine-id file on an arbitrary filesystem hierarchy. This helps systems that wish to run this at image creation time in a subdirectory, or from initramfs before pivot-root is called. [tomegun: converted to using _cleanup_free_ macros]
2014-03-14networkd: allow more than one static DNS serverTom Gundersen
2014-03-14networkd: fix creation of runtime dirs at startupTom Gundersen
This allows us to drop the repeated attempted creations of the runtime dirs during runtime.
2014-03-14networkd: lease - store (up to) one dhcp lease file per interfaceTom Gundersen
This removes an accidentally left-over test fragment.
2014-03-13nspawn: remove unused variableDave Reisner
2014-03-14nspawn: allow -EEXIST on mkdir_safe /home/${uid}Brandon Philips
With systemd 211 nspawn attempts to create the home directory for the given uid. However, if the home directory already exists then it will fail. Don't error out on -EEXIST.