| Age | Commit message (Collapse) | Author |
|---|
|
|
|
As far as I can tell, no code in this repository actually uses the ID
field, so this is just a man page change.
|
|
|
|
|
|
This is not a blind replacement of "Linux" with "GNU/Linux". In some
cases, "Linux" is (correctly) used to refer to just the kernel. In others,
it is in a string for which code must also be adjusted; these instances
are not included in this commit.
|
|
|
|
This is a v232-applicable version of upstream c9fd987279a462e.
|
|
lz4 upstream decided to switch to an incompatible numbering scheme
(1.7.3 follows 131, to match the so version).
PKG_CHECK_MODULES does not allow two version matches for the same package,
so e.g. lz4 < 10 || lz4 >= 125 cannot be used. Check twice, once for
"new" numbers (anything below 10 is assume to be new), once for the "old"
numbers (anything above >= 125). This assumes that the "new" versioning
will not get to 10 to quickly. I think that's a safe assumption, lz4 is a
mature project.
Fixed #4690.
|
|
Make sure to populate the cache in cache_space_refresh() at least once
otherwise it's possible that the system boots fast enough (and the journal
flush service is finished) before the invalidate cache timeout (30 us) has
expired.
Fixes: #4790
|
|
Commit b006762 inverted the initial exit code which is relevant for --help and
--version without a particular reason. For these special options, parse_argv()
returns 0 so that our main() immediately skips to the end without adjusting
"ret". Otherwise, if an actual container is being started, ret is set on error
in run(), which still provides the "non-zero exit on error" behaviour.
Fixes #4605.
|
|
container"
This reverts commit 3539724c26a1b2b00c4eb3c004b635a4b8647de6.
|
|
Shit's broke, yo.
https://github.com/systemd/systemd/issues/4575
|
|
Since a581e45ae8f9bb5c, there's a few function calls to
unit_new_for_name which will unit_free on failure. Prior to this commit,
a failure would result in calling unit_free with a NULL unit, and hit an
assertion failure, seen at least via device_setup_unit:
Assertion 'u' failed at src/core/unit.c:519, function unit_free(). Aborting.
Fixes #4747
https://bugs.archlinux.org/task/51950
|
|
It was a harmless but pointless duplication. Fixes #4655.
Note: in general we try to install as little as possible in
/etc/systemd/{system,user}. We only install .wants links there for units which
are "user configurable", i.e. which have an [Install] section. Most our units
and aliases are not user configurable, do not have an [Install] section, and
must be symlinked statically during installation. A few units do have an
[Install] section, and are enabled through symlinks in /etc/ during
installation using GENERAL_ALIASES. It *would* be possible to not create those
symlinks, and instead require 'systemctl preset' to be invoked after
installation, but GENERAL_ALIASES works well enough.
|
|
ENOENT should be treated as "false", but because of the broken errno check it
was treated as an error. So ConditionVirtualization=user-namespaces probably
returned the correct answer, but only by accident.
Fixes #4608.
|
|
Too many things don't get along with the unified hierarchy yet:
* https://github.com/opencontainers/runc/issues/1175
* https://github.com/docker/docker/issues/28109
* https://github.com/lxc/lxc/issues/1280
So revert the default to the legacy hierarchy for now. Developers of the above
software can opt into the unified hierarchy with
"systemd.legacy_systemd_cgroup_controller=0".
|
|
This reverts commit 75ead2b753cb9586f3f208326446081baab70da1.
Follow up for #4546:
> @@ -848,8 +848,7 @@ static int bus_kernel_make_message(sd_bus *bus, struct kdbus_msg *k) {
if (k->src_id == KDBUS_SRC_ID_KERNEL)
bus_message_set_sender_driver(bus, m);
else {
- xsprintf(m->sender_buffer, ":1.%llu",
- (unsigned long long)k->src_id);
+ xsprintf(m->sender_buffer, ":1.%"PRIu64, k->src_id);
This produces:
src/libsystemd/sd-bus/bus-kernel.c: In function ‘bus_kernel_make_message’:
src/libsystemd/sd-bus/bus-kernel.c:851:44: warning: format ‘%lu’ expects argument of type ‘long
unsigned int’, but argument 4 has type ‘__u64 {aka long long unsigned int}’ [-Wformat=]
xsprintf(m->sender_buffer, ":1.%"PRIu64, k->src_id);
^
|
|
|
|
let's get this out today!
|
|
endocode/djalal/fix-dynamicuser-supplementary-groups
core: intialize user aux groups and SupplementaryGroups= when DynamicUser= is set
|
|
|
|
|
|
is set
Make sure that when DynamicUser= is set that we intialize the user
supplementary groups and that we also support SupplementaryGroups=
Fixes: https://github.com/systemd/systemd/issues/4539
Thanks Evgeny Vereshchagin (@evverx)
|
|
Two testsuite tweaks
|
|
xsprintf revert
|
|
|
|
|
|
If we encounter the (unlikely) situation where the combined path to the
new root and a path to a mount to be moved together exceed maximum path length,
we shouldn't crash, but fail this path instead.
|
|
|
|
This reverts some changes introduced in d054f0a4d4.
xsprintf should be used in cases where we calculated the right buffer
size by hand (using DECIMAL_STRING_MAX and such), and never in cases where
we are printing externally specified strings of arbitrary length.
Fixes #4534.
|
|
Add "perpetual" unit concept, sysctl fixes, networkd fixes, systemctl color fixes, nspawn discard.
|
|
preparation for 232
|
|
|
|
overly long description strings
This essentially reverts one part of d054f0a4d451120c26494263fc4dc175bfd405b1.
(We might also choose to use proper ellipsation here, but I wasn't sure the
memory allocation this requires wouöld be a good idea here...)
Fixes: #4534
|
|
|
|
Preserve stored fds over service restart
|
|
Reported by @evverx in #4493.
|
|
more seccomp fixes, and change of order of selinux/aa/smack and seccomp application on exec
|
|
|
|
|
|
Unfortunately, github drops the original commiter when a PR is "squashed" (even
if it is only a single commit) and replaces it with some rubbish
github-specific user id. Thus, to make the contributors list somewhat useful,
update the .mailmap file and undo all the weirdness github applied there.
|
|
Since service_add_fd_store() already does the check, remove the redundant check
from service_add_fd_store_set().
Also, print a warning when repopulating FDStore after daemon-reexec and we hit
the limit. This is a user visible issue, so we should not discard fds silently.
(Note that service_deserialize_item is impacted by the return value from
service_add_fd_store(), but we rely on the general error message, so the caller
does not need to be modified, and does not show up in the diff.)
|
|
Let's propagate the error here, instead of eating it up early.
In a later change we should probably also change mount_enumerate() to propagate
errors up, but that would mean we'd have to change the unit vtable, and thus
change all unit types, hence is quite an invasive change.
|
|
Fixes: #3870
|
|
|
|
Let's make sure that our loopback files remain sparse, hence let's set
"discard" as mount option on file systems that support it if the backing device
is a loopback.
|
|
Make the underlining between the header and the body and between the units of
different types span the whole width of the table.
Let's never make the table wider than necessary (which is relevant due the
above).
When space is limited and we can't show the full ID or description string
prefer showing the full ID over the full description. The ID is after all
something people might want to copy/paste, while the description is mostly just
helpful decoration.
|
|
If we turn on red color for the active column and it is not combined with
underlining, then we need to turn it off explicitly afterwards. Do that.
|
|
Let's place only one ternary operator.
|
|
Let's only check for eof once after the fgets(). There's no point in checking
EOF before the first read, and twice in each loop.
|
