summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-01-01po: update Russian translationSergey Ptashnick
By analogy with commit 4038d7502f.
2015-01-01po: update French translationSylvain Plantefève
2015-01-01mount: do not use -n when running in --user modeZbigniew Jędrzejewski-Szmek
-n is only allowed for root. /etc/mtab is nowadays almost always a link to /proc/, so in practice this does not really matter too much, but should allow .mount units to work in --user mode. https://bugs.freedesktop.org/show_bug.cgi?id=87602
2015-01-01Type of mount(2) flags is unsigned longTopi Miettinen
2015-01-01udev: improve help/usage for some more programsRobert Milasan
2015-01-01networkctl: avoid potential use of unitialized variablesZbigniew Jędrzejewski-Szmek
Those values are based on a file we read from disk, so we should verify everything we receive, and make sure everything we print is sensible. Also, print fractional seconds for TTL.
2015-01-01networkctl: remove unused variableZbigniew Jędrzejewski-Szmek
2015-01-01network: fix scanf/printf formatZbigniew Jędrzejewski-Szmek
usec_t is defined as 64 bit wide, but long is 32 bit on many archs.
2015-01-01missing: add __NR_renameat2Zbigniew Jędrzejewski-Szmek
2015-01-01build-sys: Fix install location of systemd.pcMartin Pitt
systemd.pc contains "libdir" which can be architecture specific. Thus it needs to be installed into libdir/pkgconfig/ instead of datadir/pkgconfig. As nothing else is using pkgconfigdata any more, remove it entirely. Note that udev.pc does not contain architecture specific values and thus can be kept in /usr/share/pkgconfig/.
2015-01-01Remove "to allow" from policy messagesZbigniew Jędrzejewski-Szmek
It carries no additional information and forces a passive sentence structure which is longer and harder to parse.
2015-01-01po: update Polish translationPiotr Drąg
https://bugs.freedesktop.org/show_bug.cgi?id=87724
2015-01-01machined: fix grammar in org.freedesktop.machine1.policy.inPiotr Drąg
[zj: change "in into" to "into".] https://bugs.freedesktop.org/show_bug.cgi?id=87722
2015-01-01build-sys: fix build issue with machines.targetPhilippe De Swert
When doing "make clean" the unit/machines.target file gets deleted. This causes a build error later on when trying to rebuild systemd. V2: The file probably belongs to dist_systemunit_DATA
2015-01-01man: Clarify effect when both calendar day and date are listed in timerChris Atkinson
See bug 87859 (https://bugs.freedesktop.org/show_bug.cgi?id=87859). Bug reporter found the language describing the effect of specifying both a day and date unclear; hopefully the attached patch will clarify and allow the bug to be closed.
2014-12-31lldp: fix sd_lldp_save()David Herrmann
Fix a bunch of needless memzero() calls, a bunch of use-after-free regarding _cleanup_free_ and drop unused variables. Hint: Do NOT use _cleanup_free_ for temporary strappend() helpers that are freed multiple times. All you safe is the last free() call, which is really not worth the trouble resetting it to NULL all the time.
2014-12-31lldp: fix uninitialized cleanup var #2David Herrmann
Another uninitialized variable marked as _cleanup_. Set it to NULL to avoid accessing uninitialized memory.
2014-12-31lldp: fix uninitialized cleanup varDavid Herrmann
Make sure to set _cleanup_ variables to NULL. Otherwise, we free uninitialized objects.
2014-12-31import: fix mem-leak in CurlGlueDavid Herrmann
Make sure to actually free the underlying object in CurlGlue unref.
2014-12-31lldp: fix double freeDavid Herrmann
'k' is marked as _cleanup_free_ so reset it to NULL if we free it explicitly.
2014-12-31networkctl: fix strappend() error checkingDavid Herrmann
Make sure to test the right variable for NULL.
2014-12-31network: add malloc-assertion in testDavid Herrmann
Make sure malloc() really returns non-NULL in lldp test.
2014-12-31machinectl: remove dead codeDavid Herrmann
'r' is not touched after the previous error-checking 100 lines above. Drop that code.
2014-12-31hwdb: mouse DPI data, Logitech USB Laser Mouse M-U0011-OChristoph Brill
https://bugs.freedesktop.org/show_bug.cgi?id=87880
2014-12-31Revert commit f131770b "tree-wide: spelling fixes"David Herrmann
This partially reverts: commit f131770b1465fbf423881f16ba85523a05f846fe Author: Veres Lajos <vlajos@gmail.com> Date: Mon Dec 29 09:45:58 2014 +0000 tree-wide: spelling fixes The commit in question changed a binary file. I didn't look at the diff in particular, so I have no idea what exactly was changed. However, the file is generated and it looked highly suspiciuous. Therefore, I reverted that part. Note that this is generated by "make update-unifont" so really no reason to touch at all.
2014-12-30tree-wide: spelling fixesVeres Lajos
https://github.com/vlajos/misspell_fixer https://github.com/torstehu/systemd/commit/b6fdeb618cf2f3ce1645b3315f15f482710c7ffa Thanks to Torstein Husebo <torstein@huseboe.net>.
2014-12-30accelerometer: display short options tooRobert Milasan
2014-12-30hwdb: mouse DPI data, Logitech M-UAS144Christoph Brill
https://bugs.freedesktop.org/show_bug.cgi?id=87881
2014-12-30hwdb: mouse DPI data, Fujitsu Siemens OEMChristoph Brill
https://bugs.freedesktop.org/show_bug.cgi?id=87879
2014-12-30hwdb: mouse DPI data, Logitech MK260 aka M-R0011Christoph Brill
https://bugs.freedesktop.org/show_bug.cgi?id=87882
2014-12-30hwdb: mouse DPI data, Chicony 2.4G Multimedia Wireless KitChristoph Brill
https://bugs.freedesktop.org/show_bug.cgi?id=87883
2014-12-30systemctl: do not repeat hibernate/sleep attemptsZbigniew Jędrzejewski-Szmek
If some sleep operation was not possible (e.g. because swap is missing), we would try twice: once through logind, which would result in a clean error: Failed to execute operation: Sleep verb not supported and then second time by starting the appropriate unit directly, which is more messy. If logind tells us that something is not possible (or already in progress), report that to the user and quit. If logind is present and working we should not try to work around it. Loosely based on https://bugs.freedesktop.org/show_bug.cgi?id=87832.
2014-12-30bus: replace ENOSYS return codes with EBADR/ENOTSUPZbigniew Jędrzejewski-Szmek
ENOSYS is used to signify compiled-out functionality. Using it for different kinds of error is misleading. For BUS_ERROR_SLEEP_VERB_NOT_SUPPORTED, logind-action.c uses ENOTSUP already, so changing it to ENOTSUP makes the dbus and action paths behave the same.
2014-12-30README: CONFIG_DEVPTS_MULTIPLE_INSTANCES is necessaryZbigniew Jędrzejewski-Szmek
https://bugs.debian.org/773932
2014-12-30accelerometer: drop unused -x optionRobert Milasan
2014-12-30man: Fix spellingSusant Sahani
2014-12-30bus: add sd_bus_emit_object_{added/removed}()David Herrmann
This implements two new helpers, discussed on systemd-devel about 1 year ago: sd_bus_emit_object_added() sd_bus_emit_object_removed() Both calls are equivalent to their respective counterpart sd_bus_emit_interfaces_{added/removed}(), but can figure out the list of interfaces themselves, instead of requiring the caller to provide them. Furthermore, both calls properly deal with builtin interfaces provided via org.freedesktop.DBus.* and alike. Both calls simply traverse a node and all its parent nodes to figure out a list of all interfaces registered as vtable or fallback. It then appends each of them, similar to the interfaces_{added/removed}() helpers. Note that interfaces_{added/removed}() runs a parent traversal for *each* passed interface. Therefore, it can simply bail out, once it found a parent node that implements a given interface. With object_{added/removed}() we cannot know the registered interfaces in advance, thus, we cannot run one traversal per node. Instead, we run a single traversal and remember all interfaces that we added. Therefore, a child-interface overrides all conflicting parent-interfaces. We keep a "Set *s" context to track those while climbing up the tree.
2014-12-30bus: fix capabilities on big-endianDavid Herrmann
The kernel provides capabilities as a u32 array, sd-bus uses an u8 array. This works fine on little-endian as both are encoded the same way. However, this fails on big-endian if we do not perform sufficient byte-swapping on each u32 entry. This patch makes sd-bus use u32, too. We avoid changing any kernel provided data so we can keep pointing into kdbus pool buffers which contain u32 arrays.
2014-12-30bus: drop creds->capability_sizeDavid Herrmann
The number of available caps can be read from /proc/sys/kernel/cap_last_cap during runtime. Our helper cap_last_cap() does that, so there's no reason to remember the size of any capability cache. We can just pre-allocate arrays with a suitable size for all available caps and reject any higher caps. The kernel capability API uses u32 as base so make sure we do the same. Note that this is specified by POSIX, so it's unlikely to change.
2014-12-30macro: add DIV_ROUND_UP()David Herrmann
This macro calculates A / B but rounds up instead of down. We explicitly do *NOT* use: (A + B - 1) / A as it suffers from an integer overflow, even though the passed values are properly tested against overflow. Our test-cases show this behavior. Instead, we use: A / B + !!(A % B) Note that on "Real CPUs" this does *NOT* result in two divisions. Instead, instructions like idivl@x86 provide both, the quotient and the remainder. Therefore, both algorithms should perform equally well (I didn't verify this, though).
2014-12-29hwdb: Update database of Bluetooth company identifiersMarcel Holtmann
2014-12-29update TODOLennart Poettering
2014-12-29Revert "machined: don't force terminate registered machines"Lennart Poettering
This reverts commit 206e7a5f7b55ac61188efd895e65ab26e478cbb2. We actually want to allow shutting down containers that use RegisterMachine() rather than CreateMachine() to register their own unit. It should be safe to do so, since the primary usecase for RegisterMachine() are container managers that run only a single container within their own unit, such as systemd-nspawn.
2014-12-29machined: ignore spurious errorLennart Poettering
2014-12-29nspawn: report back to systemd only very late whether we are OKLennart Poettering
That way, systemd can actually figure out if everything is OK with nspawn.
2014-12-29preset: enable machines.target by defaultLennart Poettering
2014-12-29Update TODOLennart Poettering
2014-12-29machinectl: add "enable" and "disable" verbs for enabling/disabling ↵Lennart Poettering
systemd-nspawn for containers This is basically just a shortcut for "systemctl enable systemd-nspawn@<foobar>.service", but does escaping.
2014-12-29machinectl: add new "start" verb to start a container as a service in nspawnLennart Poettering
2014-12-29units: rework systemd-nspawn@.service unitLennart Poettering
- Unescape instance name so that we can take almost anything as instance name. - Introduce "machines.target" which consists of all enabled nspawns and can be used to start/stop them altogether - Look for container directory using -M instead of harcoding the path in /var/lib/container