| Age | Commit message (Collapse) | Author |
|---|
|
Just in case...
|
|
As it turns out 512 is max number of tasks per service is hit by too many
applications, hence let's bump it a bit, and make it relative to the system's
maximum number of PIDs. With this change the new default is 15%. At the
kernel's default pids_max value of 32768 this translates to 4915. At machined's
default TasksMax= setting of 16384 this translates to 2457.
Why 15%? Because it sounds like a round number and is close enough to 4096
which I was going for, i.e. an eight-fold increase over the old 512
Summary:
| on the host | in a container
old default | 512 | 512
new default | 4915 | 2457
|
|
Let's change from a fixed value of 12288 tasks per user to a relative value of
33%, which with the kernel's default of 32768 translates to 10813. This is a
slight decrease of the limit, for no other reason than "33%" sounding like a nice
round number that is close enough to 12288 (which would translate to 37.5%).
(Well, it also has the nice effect of still leaving a bit of room in the PID
space if there are 3 cooperating evil users that try to consume all PIDs...
Also, I like my bikesheds blue).
Since the new value is taken relative, and machined's TasksMax= setting
defaults to 16384, 33% inside of containers is usually equivalent to 5406,
which should still be ample space.
To summarize:
| on the host | in the container
old default | 12288 | 12288
new default | 10813 | 5406
|
|
|
|
That way, we can neatly keep this in line with the new TasksMaxScale= option.
Note that we didn't release a version with MemoryLimitByPhysicalMemory= yet,
hence this change should be unproblematic without breaking API.
|
|
This adds support for a TasksMax=40% syntax for specifying values relative to
the system's configured maximum number of processes. This is useful in order to
neatly subdivide the available room for tasks within containers.
|
|
log about all processes we forcibly kill
|
|
Assorted fixes
|
|
https://github.com/systemd/systemd/pull/3685 introduced
/run/systemd/inaccessible/{chr,blk} to map inacessible devices,
this patch allows systemd running inside a nspawn container to create
/run/systemd/inaccessible/{chr,blk}.
|
|
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=97011
|
|
bootctl: Always use upper case for "/EFI/BOOT" and "/EFI/BOOT/BOOT*.EFI".
|
|
|
|
rfkill dead-lock fix
|
|
build tree (#3763)
|
|
If the ESP is not mounted with "iocharset=ascii", but with "iocharset=utf8"
(which is for example the default in Debian), the file system becomes case
sensitive. This means that a file created as "FooBarBaz" cannot be accessed as
"foobarbaz" since those are then considered different files.
Moreover, a file created as "FooBar" can then also not be accessed as "foobar",
and it also prevents such a file from being created, as both would use the same
8.3 short name "FOOBAR".
Even though the UEFI specification [0] does give the canonical spelling for
the files mentioned above, not all implementations completely conform to that,
so it's possible that those files would already exist, but with a different
spelling, causing subtle bugs when scanning or modifying the ESP.
While the proper fix would of course be that everybody conformed to the
standard, we can work around this problem by just referencing the files by
their 8.3 short names, i.e. using upper case.
Fixes: #3740
[0] <http://www.uefi.org/specifications>, version 2.6, section 3.5.1.1
|
|
|
|
Fix bug introduced by #3263: mount(2) return value is 0 or -1, not errno.
Thanks to Evgeny Vereshchagin (@evverx) for reporting.
|
|
Fix a copy/paste mistake.
|
|
|
|
|
|
Normally we make all of /proc/sys read-only in a container, but if we do have
netns enabled we can make /proc/sys/net writable, as things are virtualized
then.
|
|
|
|
|
|
When a container scope is allocated via machined it gets 16K set already since
cf7d1a30e44bf380027a2e73f9bf13f423a33cc1. Make sure when a container is run as
system service it gets the same values.
|
|
We don't actually need any functionality from cgroup.h in execute.h, hence
don't include that. However, we do need the Unit structure from unit.h, hence
include that, and move it as late as possible, since it needs the definitions
from execute.h.
|
|
All other functions in execute.c that need the unit id take a Unit* parameter
as first argument. Let's change connect_logger_as() to follow a similar logic.
|
|
This way systemd is informed that we consider everything inside the scope as
"left-over", and systemd can log about killing it.
With this change systemd will log about all processes killed due to the session
clean-up on KillUserProcesses=yes.
|
|
After all, if a unit is abandoned, all processes inside of it may be considered
"left over" and are something we should better log about.
|
|
This was accidentally left commented out for debugging purposes, let's fix that
and make the signal directed again.
|
|
|
|
Let's lot at LOG_NOTICE about any processes that we are going to
SIGKILL/SIGABRT because clean termination of them didn't work.
This turns the various boolean flag parameters to cg_kill(), cg_migrate() and
related calls into a single binary flags parameter, simply because the function
now gained even more parameters and the parameter listed shouldn't get too
long.
Logging for killing processes is done either when the kill signal is SIGABRT or
SIGKILL, or on explicit request if KILL_TERMINATE_AND_LOG instead of LOG_TERMINATE
is passed. This isn't used yet in this patch, but is made use of in a later
patch.
|
|
|
|
|
|
|
|
minor follow-up fixes for #3685
|
|
The rfkill service waits for rfkill device initialization as reported by
udev_device_is_initialized(), and if that is never reported it might dead-lock.
However, udev never reports completed initialization for devices that have no
properties or tags set. For some rfkill devices this might be the case, in
particular those which are connected to exotic busses, where path_id returns
nothing.
This patch simply sets the SYSTEM_RFKILL property on all rfkill devices, to
ensure that udev_device_is_initialized() always reports something useful and we
don't dead-lock.
Fixes: #2745
|
|
actually returns
|
|
We generally try to avoid strerror(), due to its threads-unsafety, let's do
this here, too.
Also, let's be tiny bit more explanatory with the log messages, and let's
shorten a few things.
|
|
We usually hide legacy bus properties from introspection. Let's do that for the
InaccessibleDirectories= properties too.
The properties stay accessible if requested, but they won't be listed anymore
if people introspect the unit.
|
|
* Specifying a device node has an effect much larger than a simple shortcut
for a field/value match, so the original sentence is no longer a good way
to start the paragraph.
* Specifying a device node causes matches to be generated for all ancestor
devices of the device specified, not just its parents.
* Indicates that the path must be absolute, but that it may be a link.
* Eliminates a few typos.
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1151651
Also explain what localectl does a bit better:
https://bugzilla.redhat.com/show_bug.cgi?id=1357861
|
|
namespace: unify limit behavior on non-directory paths
|
|
improve handling of trailing newline in journal logging
|
|
Let's make sure our logging APIs is in sync with how stdout/stderr logging
works.
|
|
This patch renames Read{Write,Only}Directories= and InaccessibleDirectories=
to Read{Write,Only}Paths= and InaccessiblePaths=, previous names are kept
as aliases but they are not advertised in the documentation.
Renamed variables:
`read_write_dirs` --> `read_write_paths`
`read_only_dirs` --> `read_only_paths`
`inaccessible_dirs` --> `inaccessible_paths`
|
|
Despite the name, `Read{Write,Only}Directories=` already allows for
regular file paths to be masked. This commit adds the same behavior
to `InaccessibleDirectories=` and makes it explicit in the doc.
This patch introduces `/run/systemd/inaccessible/{reg,dir,chr,blk,fifo,sock}`
{dile,device}nodes and mounts on the appropriate one the paths specified
in `InacessibleDirectories=`.
Based on Luca's patch from https://github.com/systemd/systemd/pull/3327
|
|
|
|
json output
With this change, binary record data is formatted as string if --all is
specified when using json output. This is inline with the effect of --all on
the other available output modes.
Fixes: #3416
|
