Age | Commit message (Collapse) | Author |
|
Let's avoid thinking that a CNAME/DNAME chain traversal could be a good idea if QTYPE is already CNAME/DNAME.
(Also, let's bail out early when trying to see if some RR is a suitable CNAME/DNAME for some other RR).
|
|
If the first step was done via a search domain, make sure the subsequent steps are not.
|
|
|
|
IDNA checks
|
|
Move IDNA logic out of the normal domain name processing, and into the bus frontend calls. Previously whenever
comparing two domain names we'd implicitly do IDNA conversion so that "pöttering.de" and "xn--pttering-n4a.de" would be
considered equal. This is problematic not only for DNSSEC, but actually also against he IDNA specs.
Moreover it creates problems when encoding DNS-SD services in classic DNS. There, the specification suggests using
UTF8 encoding for the actual service name, but apply IDNA encoding to the domain suffix.
With this change IDNA conversion is done only:
- When the user passes a non-ASCII hostname when resolving a host name using ResolveHostname()
- When the user passes a non-ASCII domain suffix when resolving a service using ResolveService()
No IDNA encoding is done anymore:
- When the user does raw ResolveRecord() RR resolving
- On the service part of a DNS-SD service name
Previously, IDNA encoding was done when serializing names into packets, at a point where information whether something
is a label that needs IDNA encoding or not was not available, but at a point whether it was known whether to generate a
classic DNS packet (where IDNA applies), or an mDNS/LLMNR packet (where IDNA does not apply, and UTF8 is used instead
for all host names). With this change each DnsQuery object will now maintain two copies of the DnsQuestion to ask: one
encoded in IDNA for use with classic DNS, and one encoded in UTF8 for use with LLMNR and MulticastDNS.
|
|
If the poinetrs are equal, we don't have to do a deep comparison.
This is similar to a similar optimization we already have in place for RRs and keys.
|
|
Also verify whether the DNS RR types are actually suitable for a question.
|
|
|
|
equivalent
|
|
Fifteenth batch of DNSSEC patches
|
|
This is purely for developer convenience: building man pages is slow
so people tend to disable them when not working on documentation. But
sometimes it is useful to build the man page to look something up,
especially when working on an older machine which has outdated
documentation, or to test some change to documentation. The rules to build
man pages are now outside of the ENABLE_MANPAGES conditional, but they
are not used unless manually invoked, and only the inclusion of man
pages in build and install targets is affected by the conditional.
Also, more generated files are removed in clean, which seems to be
good thing, and Makefile.am is simplified.
|
|
64 bit offset is now accepted, which is nice. The old function is
deprecated, and generates a compile time warning when used. We only
use an offset of 0, so we really don't care. Adapt to use the new
function, but fall back to the old one on older versions.
|
|
src/journal-remote/journal-remote.c:590:13: warning: Value MHD_HTTP_METHOD_NOT_ACCEPTABLE is deprecated, use MHD_HTTP_NOT_ACCEPTABLE
return mhd_respond(connection, MHD_HTTP_METHOD_NOT_ACCEPTABLE,
^
The new define was added in 0.9.38. Instead of requiring the new
libmicrohttpd version, provide the fallback, it is trivial.
|
|
|
|
Little change in practice, because the program will exit soon
afterwards, but the standard style of closing all fds is now followed.
Also gets rid of gcc warning about fd_ctrl and fd_uevent being
unitialized.
|
|
|
|
manager_{start,stop}_{slice,scope,unit} functions had an optional job
output parameter. But all callers specified job, so make the parameter
mandatory, add asserts. Also extract common job variable handling to
a helper function to avoid duplication.
Avoids gcc warning about job being unitialized.
|
|
We requested various fields using SD_BUS_CREDS_AUGMENT but at least
sd_bus_creds_get_tty can fail with ENXIO, not setting the output variable.
|
|
|
|
Merge separate two error handling statements into two nested ifs.
This looks cleaner, and avoids a gcc warning about *prefix being
uninitialized.
While at it, fix identation of logging statements elsewhere in the
file.
|
|
If the initial allocation succeeded, there is no way to
fail, so cleanup function is not necessary.
|
|
The code is correct, assuming that the kernel does not feed
us garbled data. Let's initialize those variables to avoid the
warning anyway.
|
|
Setting of dst_id was based on interplay of two booleans,
making the logic hard to follow (for humans and compilers alike).
gcc was confused and emmitted a warning about an uninitialized
variable. Rework the code to make it obvious that dst_id is
set properly.
|
|
|
|
|
|
Not every byte sequence is valid utf8. We allow escaping of non-utf8
sequences in strings by using octal and hexadecimal escape sequences
(\123 and \0xAB) for bytes at or above 128. Users of cunescape_one
could infer whether such use occured when they received an answer
between 128 and 256 in *ret (a non-ascii one byte character). But this
is subtle and misleading: the comments were wrong, because ascii is a
subset of unicode, so c != 0 did not mean non-unicode, but rather
ascii-subset-of-unicode-or-raw-byte. This was all rather confusing, so
make the "single byte" condition explicit.
I'm not convinced that allowing non-utf8 sequences to be produced is
useful in all cases where we allow it (e.g. in config files), but that
behaviour is unchanged, just made more explicit.
This also fixes an (invalid) gcc warning about unitialized variable
(*ret_unicode) in callers of cunescape_one.
|
|
gcc complains that dirs might be unitialized. It cannot, but
we just checked that name has one of three values above, so
no need to check again.
|
|
|
|
sd_event_now() is a public function, so we must check all
arguments for validity. Update man page and add tests.
Sample debug message:
Assertion 'IN_SET(clock, CLOCK_REALTIME, CLOCK_REALTIME_ALARM, CLOCK_MONOTONIC, CLOCK_BOOTTIME, CLOCK_BOOTTIME_ALARM)' failed at src/libsystemd/sd-event/sd-event.c:2719, function sd_event_now(). Ignoring.
|
|
Go over the entries in the map and check that they make sense.
Tests are added. In the future we might want to do additional
checks, e.g. verifying that the error names are in the expected
format.
|
|
errno_from_name used an unusual return convention where 0 meant
"not found". This tripped up config_parse_syscall_errno(),
which would treat that as success. Return -EINVAL instead,
and adjust bus_error_name_to_errno() for the new convention.
Also remove a goto which was used as a simple if and clean
up surroudning code a bit.
|
|
This is not particularly intrusive because it happens in simple
utility functions. It helps gcc understand that error codes
are negative.
This gets a rid of most of the remaining warnings.
|
|
keymap: Add HP ProBook 440 G3
|
|
Fixes #2343
|
|
Fix broken SYSTEMD_USER_WANTS in udev rules.
|
|
core: fix memory leak on failed preset-all
|
|
tests: various fixes
|
|
We need a beautiful stacktraces sometimes
For example https://github.com/systemd/systemd/pull/2328
|
|
How to reproduce
$ systemctl set-default multi-user # https://github.com/systemd/systemd/issues/2298
$ systemctl preset-all
Failed to execute operation: Too many levels of symbolic links
$ systemctl poweroff
Fixes:
==1==
==1== HEAP SUMMARY:
==1== in use at exit: 65,645 bytes in 7 blocks
==1== total heap usage: 40,539 allocs, 40,532 frees, 30,147,547 bytes allocated
==1==
==1== 109 (24 direct, 85 indirect) bytes in 1 blocks are definitely lost in loss record 2 of 7
==1== at 0x4C2BBCF: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1== by 0x4C2DE2F: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1== by 0x23DA71: unit_file_changes_add (install.c:233)
==1== by 0x23E45D: remove_marked_symlinks_fd (install.c:453)
==1== by 0x23E267: remove_marked_symlinks_fd (install.c:405)
==1== by 0x23E641: remove_marked_symlinks (install.c:494)
==1== by 0x243A91: execute_preset (install.c:2190)
==1== by 0x244343: unit_file_preset_all (install.c:2351)
==1== by 0x18AAA2: method_preset_all_unit_files (dbus-manager.c:1846)
==1== by 0x1D8157: method_callbacks_run (bus-objects.c:420)
==1== by 0x1DA9E9: object_find_and_run (bus-objects.c:1257)
==1== by 0x1DB02B: bus_process_object (bus-objects.c:1373)
==1==
==1== LEAK SUMMARY:
==1== definitely lost: 24 bytes in 1 blocks
==1== indirectly lost: 85 bytes in 1 blocks
==1== possibly lost: 0 bytes in 0 blocks
==1== still reachable: 65,536 bytes in 5 blocks
==1== suppressed: 0 bytes in 0 blocks
==1== Reachable blocks (those to which a pointer was found) are not shown.
==1== To see them, rerun with: --leak-check=full --show-leak-kinds=all
==1==
==1== For counts of detected and suppressed errors, rerun with: -v
==1== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0)
|
|
We have
JOB UNIT TYPE STATE
1 testsuite.target start waiting
81 end.service start waiting
187 sleep.service start waiting
136 hello.service start waiting
82 testsuite.service start running
135 hello-after-sleep.target start waiting
sometimes
|
|
we don't run nspawn in TEST-02-CRYPTSETUP
|
|
|
|
systemd-fsck depends on /sbin/fsck*
|
|
* Use $ROOTLIBDIR/systemd always
* Don't pass $ROOTLIBDIR/systemd as the first argument:
$ cat /proc/1/cmdline
/lib/systemd/systemd/lib/systemd/systemd...
|
|
|
|
If we have a signed DNAME RR response, there's no need to insist on a signature for a CNAME RR response, after all it
is unlikely to be signed, given the implicit synthethis of CNAME through DNAME RRs.
|
|
The functionality of SYSTEMD_USER_WANTS that attaches dependencies to device
units from udev rules was broken since commit b2c23da8. I guess it was due to
a mass replace s/SYSTEMD_USER/MANAGER_USER/.
|
|
As discussed on the ML:
http://lists.freedesktop.org/archives/systemd-devel/2016-January/035594.html
|
|
|
|
Quite often we read the same RR key multiple times from the same message. Try to replace them by a single object when
we notice this. Do so again when we add things to the cache.
This should reduce memory consumption a tiny bit.
|