| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Also fix the random lack of completion
|
|
|
|
|
|
|
|
|
|
Re-ordered some of the options and added a few that were missing
previously as well.
|
|
|
|
|
|
|
|
Moved zsh shell completion to shell-completion/zsh/_systemd for
automake's sake. Also allow users to specify where the files should go
with::
./configure --with-zshcompletiondir=/path/to/some/where
and by default going to `$datadir/zsh/site-functions`
|
|
|
|
Python 2.7, and 3.2 and higher support querying compilation
flags through pkg-config. This makes python support follow
rules similar to various other optional compilation-time
libraries. New flags are called PYTHON_DEVEL_CFLAGS and
PYTHON_DEVEL_LIBS, because PYTHON (without _DEVEL), is
already used for the python binary name, and things would
be confusing if the same prefix was used for two things.
configure has --disable-python-devel to disable python modules.
One advantage is that CFLAGS for modules gets smaller:
- -I/usr/include/python3.3m -I/usr/include/python3.3m -Wno-unused-result -DDYNAMIC_ANNOTATIONS_ENABLED=1 -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_GNU_SOURCE -fPIC -fwrapv
+ -I/usr/include/python3.3m
as does LIBS:
- -lpthread -ldl -lutil -lm -lpython3.3m
+ -lpython3.3m
Support for Python 2.6 is removed, but can be easily
restored by using
PYTHON_DEVEL_CFLAGS="$(python2.6-config --cflags)",
etc., as ./configure parameters.
https://bugs.freedesktop.org/show_bug.cgi?id=57800
|
|
Avoid pulling-in selinux for tools which just create directories
but not need to fix the selinux label.
|
|
|
|
No sense in keeping this around if support for reading RD_TIMESTAMP has
been removed.
|
|
|
|
Yesterday I added test-suite.log as dependency to the .PRECIOUS
target. Automake is warning about this target being redefined
and from what I see there is no way I can stop the warning but
I can add the %MAKEFILE% as dependency.
automake warning:
Makefile.am:35: warning: user target '.PRECIOUS' defined here ...
/usr/share/automake-1.13/am/configure.am: ... overrides Automake target '.PRECIOUS' defined here
[zj: s/%MAKEFILE%/Makefile/ because %MAKEFILE% wasn't actually substituted properly.]
|
|
The addition of .DELETE_ON_ERROR will lead to the removal of the
test-suite.log in case of a test failure. Mark the rule as PRECIOUS
to keep that file around.
|
|
|
|
They were removed by mistake, and since we ship .html files,
we certainly should ship man pages.
https://bugs.freedesktop.org/show_bug.cgi?id=61753
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=55248
|
|
Enable coverage with --enable-coverage.
"make coverage" will create the report locally,
"make coverage-sync" will upload the report to
http://www.freedesktop.org/software/systemd/coverage/.
Requires lcov version 1.10 to handle naming in systemd and to
use the --no-external option.
[zj: make the coverage at least generate something with
separate build dir, simplify rules a bit: all errors
are mine. ]
|
|
|
|
|
|
As of kmod v14, it is possible to export the static node information from
/lib/modules/`uname -r`/modules.devname in tmpfiles.d(5) format.
Use this functionality to let systemd-tmpfilesd create the static device nodes
at boot, and drop the functionality from systemd-udevd.
As an effect of this we can move from systemd-udevd to systemd-tmpfiles-setup-dev:
* the conditional CAP_MKNOD (replaced by checking if /sys is mounted rw)
* ordering before local-fs-pre.target (see 89d09e1b5c65a2d97840f682e0932c8bb499f166)
|
|
The tests check if the tables have entries for all values
in the enum, and that the entries are unique.
|
|
|
|
One is a typo, the other one doesn't actually exist yet.
|
|
We should probably work around it, until it is sorted out.
http://debbugs.gnu.org/cgi/bugreport.cgi?bug=14728
|
|
RPM macros are moved from /etc to /usr, in the sprit of moving
in the direction of empty /etc.
RPM gained support for the new directory recently, in v. 4.10.90:
https://bugzilla.redhat.com/show_bug.cgi?id=846679.
|
|
Embedded folks don't need the machine registration stuff, hence it's
nice to make this optional. Also, I'd expect that machinectl will grow
additional commands quickly, for example to join existing containers and
suchlike, hence it's better keeping that separate from loginctl.
|
|
There are no such strings for input devices in the kernel.
|
|
"Scope" units are very much like service units, however with the
difference that they are created from pre-existing processes, rather
than processes that systemd itself forks off. This means they are
generated programmatically via the bus API as transient units rather
than from static configuration read from disk. Also, they do not provide
execution-time parameters, as at the time systemd adds the processes to
the scope unit they already exist and the parameters cannot be applied
anymore.
The primary benefit of this new unit type is to create arbitrary cgroups
for worker-processes forked off an existing service.
This commit also adds a a new mode to "systemd-run" to run the specified
processes in a scope rather then a transient service.
|
|
Fixed build on debian wheezy:
./.libs/libudev.so: undefined reference to `cg_create'
Appears to have no influence on the resulting binaries and
libraries. Cf. b5fafdf63f.
|
|
Signed-off-by: Martin Pitt <martinpitt@gnome.org>
|
|
Transient units can be created via the bus API. They are configured via
the method call parameters rather than on-disk files. They are subject
to normal GC. Transient units currently may only be created for
services (however, we will extend this), and currently only ExecStart=
and the cgroup parameters can be configured (also to be extended).
Transient units require a unique name, that previously had no
configuration file on disk.
A tool systemd-run is added that makes use of this functionality to run
arbitrary command lines as transient services:
$ systemd-run /bin/ping www.heise.de
Will cause systemd to create a new transient service and run ping in it.
|
|
|
|
Replace the very generic cgroup hookup with a much simpler one. With
this change only the high-level cgroup settings remain, the ability to
set arbitrary cgroup attributes is removed, so is support for adding
units to arbitrary cgroup controllers or setting arbitrary paths for
them (especially paths that are different for the various controllers).
This also introduces a new -.slice root slice, that is the parent of
system.slice and friends. This enables easy admin configuration of
root-level cgrouo properties.
This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in
/dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is
turned off by DevicePolicy=).
|
|
|
|
- This changes all logind cgroup objects to use slice objects rather
than fixed croup locations.
- logind can now collect minimal information about running
VMs/containers. As fixed cgroup locations can no longer be used we
need an entity that keeps track of machine cgroups in whatever slice
they might be located. Since logind already keeps track of users,
sessions and seats this is a trivial addition.
- nspawn will now register with logind and pass various bits of metadata
along. A new option "--slice=" has been added to place the container
in a specific slice.
- loginctl gained commands to list, introspect and terminate machines.
- user.slice and machine.slice will now be pulled in by logind.service,
since only logind.service requires this slice.
|
|
|
|
In order to prepare for the kernel cgroup rework, let's introduce a new
unit type to systemd, the "slice". Slices can be arranged in a tree and
are useful to partition resources freely and hierarchally by the user.
Each service unit can now be assigned to one of these slices, and later
on login users and machines may too.
Slices translate pretty directly to the cgroup hierarchy, and the
various objects can be assigned to any of the slices in the tree.
|
|
Useful when working just on the documentation.
|
|
quotaon.service is already installed through dist_systemunit_DATA, so it doesn't
need to be added to nodist_systemunit_DATA. Installing the same file twice
results in a race condition where the install process can fail.
https://bugs.freedesktop.org/show_bug.cgi?id=65659
[zj: actually remove quotaon.service from the other list.]
|
|
This test case failed until a3e6f050de8.
Taken from https://bugs.freedesktop.org/show_bug.cgi?id=65255.
|
|
Merge all ENABLE_TMPFILES conditionals into one, and merge two ENABLE_EFI
conditionals. Also make sure the .in files are always distributed.
|
|
|
|
https://launchpad.net/bugs/1152377
|
|
|
