summaryrefslogtreecommitdiff
path: root/Makefile.am
AgeCommit message (Collapse)Author
2014-06-18networkd: add address pool supportLennart Poettering
When an address is configured to be all zeroes, networkd will now automatically find a locally unused network of the right size from a list of pre-configured pools. Currently those pools are 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16 and fc00::/7, i.e. the network ranges for private networks. They are compiled in, but should be configurable eventually. This allows applying the same configuration to a large number of interfaces with each time a different IP range block, and management of these IP ranges is fully automatic. When allocating an address range from the pool it is made sure the range is not used otherwise.
2014-06-18cryptsetup: introduce new cryptsetup-pre.traget unit so that services can ↵Lennart Poettering
make sure they are started before and stopped after any LUKS setup https://bugzilla.redhat.com/show_bug.cgi?id=1097938
2014-06-17build-sys: add missing backslashRonny Chevalier
2014-06-17build-sys: touch /usr on "make install"Lennart Poettering
this way, the "make install" will be detected as offline update on next boot.
2014-06-17preset: ship a minimal preset file upstreamLennart Poettering
This is useful so that distros have something to base their own policy of. It also useful to make sure that minimal installs always get useful configuration in place.
2014-06-16tests: add test-fdsetRonny Chevalier
2014-06-16tests: add test-socket-utilRonny Chevalier
2014-06-16networkd: introduce vxlanSusant Sahani
This patch enables netwokd to create vxlan Changes: Added: 1. File networkd networkd-vxlan.c 2. to netdev bool learning struct in_addr group uint64_t vxlanid; 3. VXLAN subsection and config parameters
2014-06-16units: add a service to invoke ldconfig on system updates at bootLennart Poettering
2014-06-13rpm: add RPM macros to apply sysusers, sysctl, and binfmt drop-insLennart Poettering
With this in place RPMs can make sure that whatever they drop in is immeidately applied, and not delayed until next reboot. This also moves systemd-sysusers back to /usr/bin, since hardcoding the path to /usr/lib in the macros would mean compatibility breaks in future, should we turn sysusers into a command that is actually OK for people to call directly. And given that that is quite likely to happen (since it is useful to prepare images with its --root= switch), let's just prepare for it.
2014-06-13sd-dhcp-server: add basic functionality for creating/destroying server instanceTom Gundersen
2014-06-13tmpfiles: add minimal tmpfiles snippet to rebuild the most essential stuff ↵Lennart Poettering
from /etc
2014-06-13units: rebuild /etc/passwd, the udev hwdb and the journal catalog files on bootLennart Poettering
Only when necessary of course, nicely guarded with the new ConditionNeedsUpdate= condition we added.
2014-06-13update-done: add minimal tool to manage system updates for /etc and /var, if ↵Lennart Poettering
/usr has changed In order to support offline updates to /usr, we need to be able to run certain tasks on next boot-up to bring /etc and /var in line with the updated /usr. Hence, let's devise a mechanism how we can detect whether /etc or /var are not up-to-date with /usr anymore: we keep "touch files" in /etc/.updated and /var/.updated that are mtime-compared with /usr. This means: Whenever the vendor OS tree in /usr is updated, and any services that shall be executed at next boot shall be triggered, it is sufficient to update the mtime of /usr itself. At next boot, if /etc/.updated and/or /var/.updated is older than than /usr (or missing), we know we have to run the update tools once. After that is completed we need to update the mtime of these files to the one of /usr, to keep track that we made the necessary updates, and won't repeat them on next reboot. A subsequent commit adds a new ConditionNeedsUpdate= condition that allows checking on boot whether /etc or /var are outdated and need updating. This is an early step to allow booting up with an empty /etc, with automatic rebuilding of the necessary cache files or user databases therein, as well as supporting later updates of /usr that then propagate to /etc and /var again.
2014-06-13sysusers: move systemd-sysusers to libexec for nowLennart Poettering
2014-06-12sysuser: generate default snippet incorporating TTY_GID properlyLennart Poettering
When the user specifies --with-tty-gid= then we should honour that and write it to the snippet, too.
2014-06-12sysusers: add minimal tool to reconstruct /etc/passwd and /etc/group from ↵Lennart Poettering
static files systemd-sysusers is a tool to reconstruct /etc/passwd and /etc/group from static definition files that take a lot of inspiration from tmpfiles snippets. These snippets should carry information about system users only. To make sure it is not misused for normal users these snippets only allow configuring UID and gecos field for each user, but do not allow configuration of the home directory or shell, which is necessary for real login users. The purpose of this tool is to enable state-less systems that can populate /etc with the minimal files necessary, solely from static data in /usr. systemd-sysuser is additive only, and will never override existing users. This tool will create these files directly, and not via some user database abtsraction layer. This is appropriate as this tool is supposed to run really early at boot, and is only useful for creating system users, and system users cannot be stored in remote databases anyway. The tool is also useful to be invoked from RPM scriptlets, instead of useradd. This allows moving from imperative user descriptions in RPM to declarative descriptions. The UID/GID for a user/group to be created can either be chosen dynamic, or fixed, or be read from the owner of a file in the file system, in order to support reconstructing the correct IDs for files that shall be owned by them. This also adds a minimal user definition file, that should be sufficient for most basic systems. Distributions are expected to patch these files and augment the contents, for example with fixed UIDs for the users where that's necessary.
2014-06-11build-sys: update library versionsLennart Poettering
2014-06-11units: introduce network-pre.target as place to hook in firewallsLennart Poettering
network-pre.target is a passive target that should be pulled in by services that want to be executed before any network is configured (for example: firewall scrips). network-pre.target should be ordered before all network managemet services (but not be pulled in by them). network-pre.target should be order after all services that want to be executed before any network is configured (and be pulled in by them).
2014-06-11tmpfiles: always recreate the most basic directory structure in /varLennart Poettering
Let's allow booting up with /var empty. Only create the most basic directories to get to a working directory structure and symlink set in /var.
2014-06-10tmpfiles: add new "C" line for copying files or directoriesLennart Poettering
2014-06-09build: fix copypaste error in networkd-wait-online symlinkDave Reisner
2014-06-07Move handling of sysv initscripts to a generatorThomas Hindoe Paaboel Andersen
Reuses logic from service.c and the rc-local generator. Note that this drops reading of chkconfig entirely. It also drops reading runlevels from the LSB headers. The runlevels were only used to check for runlevels outside of the normal 1-5 range and then add special dependencies and settings. Special runlevels were dropped in the past so it seemed to be unused code. The generator does not know about non-generated units with a value set with SysVStartPriority=. These are therefor not taken into account when converting start priority to before/after.
2014-06-06bus: add basic dbus1 policy parserLennart Poettering
Enforcement is still missing, but at least we can parse it now.
2014-06-05socket-proxyd: port to asynchronous name resolution using sd-resolveLennart Poettering
2014-06-04journald: move /dev/log socket to /runLennart Poettering
This way we can make the socket also available for sandboxed apps that have their own private /dev. They can now simply symlink the socket from /dev.
2014-06-04bus-proxy: drop priviliges if we canLennart Poettering
Either become uid/gid of the client we have been forked for, or become the "systemd-bus-proxy" user if the client was root. We retain CAP_IPC_OWNER so that we can tell kdbus we are actually our own client.
2014-06-03resolved: run as unpriviliged "systemd-resolve" userTom Gundersen
This service is not yet network facing, but let's prepare nonetheless. Currently all caps are dropped, but some may need to be kept in the future.
2014-06-03networkd: drop CAP_SYS_MODULETom Gundersen
Rely on modules being built-in or autoloaded on-demand. As networkd is a network facing service, we want to limits its capabilities, as much as possible. Also, we may not have CAP_SYS_MODULE in a container, and we want networkd to work the same there. Module autoloading does not always work, but should be fixed by the kernel patch f98f89a0104454f35a: 'net: tunnels - enable module autoloading', which is currently in net-next and which people may consider backporting if they want tunneling support without compiling in the modules. Early adopters may also use a module-load.d snippet and order systemd-modules-load.service before networkd to force the module loading of tunneling modules. This sholud fix the various build issues people have reported.
2014-06-02networkd: introduce veth device supportSusant Sahani
This patch adds veth device support to networkd. Example conf: File: veth.netdev [NetDev] Name=veth-test Kind=veth [Peer] Name=veth-peer
2014-06-01networkd: run as unpriviliged "systemd-network" userLennart Poettering
This allows us to run networkd mostly unpriviliged with the exception of CAP_NET_* and CAP_SYS_MODULE. I'd really like to get rid of the latter though...
2014-05-28virt: rework container detection logicLennart Poettering
Instead of accessing /proc/1/environ directly, trying to read the $container variable from it, let's make PID 1 save the contents of that variable to /run/systemd/container. This allows us to detect containers without the need for CAP_SYS_PTRACE, which allows us to drop it from a number of daemons and from the file capabilities of systemd-detect-virt. Also, don't consider chroot a container technology anymore. After all, we don't consider file system namespaces container technology anymore, and hence chroot() should be considered a container even less.
2014-05-27build-sys: bump package and library versionLennart Poettering
2014-05-25nspawn: make nspawn robust to container failureDjalal Harouni
nspawn and the container child use eventfd to wait and notify each other that they are ready so the container setup can be completed. However in its current form the wait/notify event ignore errors that may especially affect the child (container). On errors the child will jump to the "child_fail" label and terminate with _exit(EXIT_FAILURE) without notifying the parent. Since the eventfd is created without the "EFD_NONBLOCK" flag, this leaves the parent blocking on the eventfd_read() call. The container can also be killed at any moment before execv() and the parent will not receive notifications. We can fix this by using cheap mechanisms, the new high level eventfd API and handle SIGCHLD signals: * Keep the cheap eventfd and EFD_NONBLOCK flag. * Introduce eventfd states for parent and child to sync. Child notifies parent with EVENTFD_CHILD_SUCCEEDED on success or EVENTFD_CHILD_FAILED on failure and before _exit(). This prevents the parent from waiting on an event that will never come. * If the child is killed before execv() or before notifying the parent, we install a NOP handler for SIGCHLD which will interrupt blocking calls with EINTR. This gives a chance to the parent to call wait() and terminate in main(). * If there are no errors, parent will block SIGCHLD, restore default handler and notify child which will do execv(), then parent will pass control to process_pty() to do its magic. This was exposed in part by: https://bugs.freedesktop.org/show_bug.cgi?id=76193 Reported-by: Tobias Hunger tobias.hunger@gmail.com
2014-05-24shared: rename hwclock.[ch] to clock-util.[ch]Kay Sievers
2014-05-22build-sys: let libsystemd_network pull in libudev-internal.laKay Sievers
On Thu, May 22, 2014 at 9:53 AM, Jan Engelhardt <jengelh@inai.de> wrote: > > If libsystemd-network.la is relying on that udev function, it ought > to specify libudev(-internal).la in libsystemd_network_la_LIBADD.
2014-05-22build-sys: do not run symbol list export test for compat-only libsKay Sievers
The verbose link-time deprecation warnings are annoying. These libs will never change or be extended; there is no need to test the list of exported symbols.
2014-05-22build-sys: fix linking orderKay Sievers
./.libs/libsystemd-network.a(libsystemd_network_la-network-internal.o): network-internal.c:function net_get_unique_predictable_data: error: undefined reference to 'udev_device_get_property_value' collect2: error: ld returned 1 exit status
2014-05-22Makefile.am: fix whitespaceKay Sievers
2014-05-22build: put missing KMOD_CFLAGS into MakefileJan Engelhardt
The build fails if kmod is not in a default location.
2014-05-21logind: don't apply RemoveIPC= to system usersLennart Poettering
We shouldn't destroy IPC objects of system users on logout. http://lists.freedesktop.org/archives/systemd-devel/2014-April/018373.html This introduces SYSTEM_UID_MAX defined to the maximum UID of system users. This value is determined compile-time, either as configure switch or from /etc/login.defs. (We don't read that file at runtime, since this is really a choice for a system builder, not the end user.) While we are at it we then also update journald to use SYSTEM_UID_MAX when we decide whether to split out log data for a specific client.
2014-05-19resolved: add daemon to manage resolv.confTom Gundersen
Also remove the equivalent functionality from networkd.
2014-05-18network: always take possession of host side of nspawn veth tunnels and do ↵Lennart Poettering
IPv4LL on them
2014-05-18timesyncd: run timesyncd as unpriviliged user "systemd-timesync" (but still ↵Lennart Poettering
with CAP_SYS_TIME)
2014-05-16networkd: manager - read fallback DNS servers from config fileTom Gundersen
We will still use the compiled-in defaults if no DNS entry exists in the config file.
2014-05-15network: fix build failure, missing KMOD_XXX flagsCristian Rodríguez
- Add KMOD_CFLAGS and KMOD_LIBS where appropiate - networkd now requires kmod. make --disable-kmod --enable-networkd to raise an error.
2014-05-15readahead: add test to show fs_on_ssd() resultZbigniew Jędrzejewski-Szmek
2014-05-15sd-bus: introduce sd_bus_slot objects encapsulating callbacks or vtables ↵Lennart Poettering
attached to a bus connection This makes callback behaviour more like sd-event or sd-resolve, and creates proper object for unregistering callbacks. Taking the refernce to the slot is optional. If not taken life time of the slot will be bound to the underlying bus object (or in the case of an async call until the reply has been recieved).
2014-05-13shared: add ring bufferDavid Herrmann
New "struct ring" object that implements a basic ring buffer for arbitrary byte-streams. A new basic runtime test is also added. This will be needed for our pty helpers for systemd-console and friends.
2014-05-12networkd: introduce ipip tunnelSusant Sahani
This patch enables basic ipip tunnel support. It works with kernel module ipip example conf: file: ipip.netdev [NetDev] Name=ipip-tun Kind=ipip MTUBytes=1480 [Tunnel] Local=192.168.223.238 Remote=192.169.224.239 TTL=64 file: ipip.network [Match] Name=em1 [Network] Tunnel=ipip-tun [tomegun: - drop unused variable - take ref when enslaving]