| Age | Commit message (Collapse) | Author |
|---|
|
|
|
To make sure we don't delay boot on systems where (some) network links are managed by someone else
we don't block if something else has successfully brought up a link.
We will still block until all links we are aware of that are managed by networkd have been
configured, but if no such links exist, and someone else have configured a link sufficiently
that it has a carrier, it may be that the link is ready so we should no longer block.
Note that in all likelyhood the link is not ready (no addresses/routes configured),
so whatever network managment daemon configured it should provide a similar wait-online
service to block network-online.target until it is ready.
The aim is to block as long as we know networking is not fully configured, but no longer. This
will allow systemd-networkd-wait-online.service to be enabled on any system, even if we don't
know whether networkd is the main/only network manager.
Even in the case networking is fully configured by networkd, the default behavior may not be
sufficient: if two links need to be configured, but the first is fully configured before the
second one appears we will assume the network is up. To work around that, we allow specifying
specific devices to wait for before considering the network up.
This unit is enabled by default, just like systemd-networkd, but will only be pulled in if
anyone pulls in network-online.target.
|
|
|
|
|
|
|
|
|
|
The way the kernel namespaces have been implemented breaks assumptions
udev made regarding uevent sequence numbers. Creating devices in a
namespace "steals" uevents and its sequence numbers from the host. It
confuses the "udevadmin settle" logic, which might block until util a
timeout is reached, even when no uevent is pending.
Remove any assumptions about sequence numbers and deprecate libudev's
API exposing these numbers; none of that can reliably be used anymore
when namespaces are involved.
|
|
|
|
systemd-machined doesn't store cgroup path in a state file anymore.
Let's figure it out from the scope.
|
|
|
|
Use a static table with all the typing information, rather than repeated
switch statements. This should make it a lot simpler to add new types.
We need to keep all the type info to be able to create containers
without exposing their implementation details to the users of the library.
As a freebee we verify the types of appended/read attributes.
The API is extended to nicely deal with unions of container types.
|
|
<kay> ssuominen: and drop --no-as-needed from the linkcheck?
<kay> ssuominen: i expect it all triggers without the gc-sections thing alone
<ssuominen> if the intention is to make it strict as possible,
to catch undefined references caused by missing -lfoo in linker line, then
LDFLAGS="-Wl,-fuse-ld=gold -Wl,--as-needed -Wl,--no-gc-sections"
|
|
|
|
|
|
|
|
/run/user/$UID/
$ ./test-cgroup-mask
...
rmdir("/run/user/2702/systemd/generator") = 0
open("/run/user/2702/systemd/generator.late", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_NOFOLLOW|O_NOATIME|O_CLOEXEC) = 5
fstat(5, {st_mode=S_IFDIR|0755, st_size=3200, ...}) = 0
fcntl(5, F_GETFL) = 0x78800 (flags O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|O_NOFOLLOW|O_NOATIME)
fcntl(5, F_SETFD, FD_CLOEXEC) = 0
getdents(5, /* 160 entries */, 32768) = 10072
unlinkat(5, "org.gnome.Weather.Application.busname", 0) = 0
unlinkat(5, "dbus-org.gnome.Weather.Application.service", 0) = 0
...
|
|
|
|
|
|
|
|
|
|
Added support for tunneling netlink attrributes (ipip, gre, sit).
These works with kernel module ipip, gre and sit . The test cases are
moved to a separate file and manual test as well because they require
respective kernel modules as well.
|
|
tcpwrap is legacy code, that is barely maintained upstream. It's APIs
are awful, and the feature set it exposes (such as DNS and IDENT
access control) questionnable. We should not support this natively in
systemd.
Hence, let's remove the code. If people want to continue making use of
this, they can do so by plugging in "tcpd" for the processes they start.
With that scheme things are as well or badly supported as they were from
traditional inetd, hence no functionality is really lost.
|
|
This does not belong in shared as it is mostly a detail of our networking subsystem.
Moreover, now we can use libudev here, which will simplify things.
|
|
Add a new config 'Activating' directive which denotes whether a busname
is actually registered on the bus. It defaults to 'yes'.
If set to 'no', the .busname unit only uploads policy, which will remain
active as long as the unit is running.
|
|
After all, it is ultimately linked to libsystems.so anyway, thus belongs
there and shares very little with the rest of logind, hence let's move
this away.
|
|
The whole tool is made dependent on µhttpd availability. It should be
easy to make the µhttpd parts conditional, but since transfer over
HTTP seems to be the primary use case, currently this is not done.
Current implementation uses nested epoll loops: sd-event is used for
the external event loop, and µhttpd uses epoll in its own
loop. Unfortunately µhttpd does not expose enough information to add
the descriptors it uses to the external event loop. This means that
starvation of other events is possible, if one of the inner µhttpd
loops is constantly busy. This means that µhttpd servers should not
be mixed with other sources.
The TLS authentication parts haven't been really tested properly, and
should not be take too seriously.
|
|
|
|
Prefix "gnutls: " is added. Some semi-random mapping of gnutls levels
to syslog levels is done, but since gnutls levels seem to be used
rather loosely, most end up as debug.
|
|
_machinectl uses _sd_machines to provide a list of all available
machines.
|
|
This will let journald forward logs as messages sent to all logged in
users (like wall).
Two options are added:
* ForwardToWall (default yes)
* MaxLevelWall (default emerg)
'ForwardToWall' is overridable by kernel command line option
'systemd.journald.forward_to_wall'.
This is used to emulate the traditional syslogd behaviour of sending
emergency messages to all logged in users.
|
|
them fully log out
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=76056
|
|
Since we now use ln -s --relative, using this sed statement is redundant
and causes broken symlinks to be installed.
|
|
|
|
|
|
I run this anyway, and given how slow it is now due to -flto, let's make
my workflow a bit faster...
|
|
|
|
|
|
Discoverable Partitions Specification
|
|
It contains hardcoded path to systemd-sysctl executable which
is /usr/lib/systemd/systemd-sysctl on latest stable release and
as such it will complain at runtime if rootprefix != prefix
[zj: readd the file to nodist_udevrules_DATA]
|
|
- Add support for finding and mounting /srv based on GPT data, similar
to how we already handly /home.
- Share the fsck logic between GPT, EFI and fstab generators
- Make sure we never run the EFI generator inside containers
- Drop DefaultDependencies=no from EFI mount units
- Other fixes
|
|
|
|
As it appears "ln -s --relative" in conjunction with "-f" is broken,
let's work around that by explicitly remove the destination of the
symlink before we create it.
https://bugzilla.redhat.com/show_bug.cgi?id=1072103
|
|
Implements IPv4LL with respect to RFC 3927
(http://tools.ietf.org/rfc/rfc3927.txt) and integrates it
with networkd. Majority of the IPv4LL state machine is
taken from avahi (http://avahi.org/) project's autoip.
IPv4LL can be enabled by IPv4LL=yes under [Network]
section of .network file.
IPv4LL works independent of DHCP but if DHCP lease is
aquired, then LL address will be dropped.
[tomegun: removed a trailing newline and a compiler warning]
|
|
|
|
Let's make the scope of the show-status stuff a bit smaller, and make it
private to the core, rather than shared API in shared/.
|
|
By using --relative symlinks look nicer when dealing with OS image trees
that are placed in arbitrary places of the OS.
|
|
The symlink is created in bindir (/usr/bin), and points to a binary
which lives in rootlibexecdir (/lib/systemd or /usr/lib/systemd). A
relative symlink does not work here.
|
|
This is primarily useful for services that need to track clients which
reference certain objects they maintain, or which explicitly want to
subscribe to certain events. Something like this is done in a large
number of services, and not trivial to do. Hence, let's unify this at
one place.
This also ports over PID 1 to use this to ensure that subscriptions to
job and manager events are correctly tracked. As a side-effect this
makes sure we properly serialize and restore the track list across
daemon reexec/reload, which didn't work correctly before.
This also simplifies how we distribute messages to broadcast to the
direct busses: we only track subscriptions for the API bus and
implicitly assume that all direct busses are subscribed. This should be
a pretty OK simplification since clients connected via direct bus
connections are shortlived anyway.
|
