| Age | Commit message (Collapse) | Author |
|---|
|
different clients
|
|
Some zsh completion helpers were not installed, so completion
was broken.
Add systemd-analyze verify. Make systemctl link complete only
unit names.
|
|
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1121806
|
|
This tool will warn about misspelt directives, unknown sections, and
non-executable commands. It will also catch the common mistake of
using Accept=yes with a non-template unit and vice versa.
https://bugs.freedesktop.org/show_bug.cgi?id=56607
|
|
Commit 637f421e5c6a ("cgroups: always propagate controller membership
to siblings") changed the mask propagation logic, but the test wasn't
updated.
Move to normal tests from manual tests, it should not touch the system
anymore.
|
|
Also add a bit of debugging output to help diagnose problems,
add missing units, and simplify cppflags.
Move test-engine to normal tests from manual tests, it should now
work without destroying the system.
|
|
systemd-timesyncd.service has a "WantedBy=sysinit.target" so the
initially generated link should match that.
|
|
Our version has evolved independently of the original table
in systemd-config-keyboard, so it cannot be ever regenerated from
original upstream. Remove script to avoid confusion.
|
|
|
|
The unifont layer of libsystemd-terminal provides a fallback font for
situations where no system-fonts are available, or if you don't want to
deal with traditional font-formats for some reasons.
The unifont API mmaps a pre-compiled bitmap font that was generated out of
GNU-Unifont font-data. This guarantees, that all users of the font will
share the pages in memory. Furthermore, the layout of the binary file
allows accessing glyph data in O(1) without pre-rendering glyphs etc. That
is, the OS can skip loading pages for glyphs that we never access.
Note that this is currently a test-run and we want to include the binary
file in the GNU-Unifont package. However, until it was considered stable
and accepted by the maintainers, we will ship it as part of systemd. So
far it's only enabled with the experimental --enable-terminal, anyway.
|
|
Whoopsy, I totally forgot adding the "if ENABLE_TERMINAL" markers. Do that
now that we know it builds fine everywhere.
|
|
The systemd-subterm example is a stacked terminal that shows how to
use sd-term. Instead of rendering images and displaying it via X11/etc.,
it uses its parent terminal to display the page (terminal-emulator inside
a terminal-emulator) (like GNU-screen and friends do).
This is only for testing and not installed system-wide!
|
|
The screen-layer represents the terminal-side (compared to the host-side).
It connects term_parser with term_page and implements all the required
control sequences.
We do not implement all available control sequences. Even though our
parser recognizes them, there is no need to handle them. Most of them are
legacy or unused. We try to be as compatible to xterm, so if we missed
something, we can implement it later. However, all the VT510 / VT440 stuff
can safely be skipped (who needs terminal macros? WTF?).
The keyboard-handling is still missing. It will be added once
systemd-console is available and we pulled in the key-definitions.
|
|
The term-parser is used to parse any input from TTY-clients. It reads CSI,
DCS, OSC and ST control sequences and normal escape sequences. It doesn't
do anything with the parsed data besides detecting the sequence and
returning it. The caller has to react to them.
The parser also comes with its own UTF-8 helpers. The reason for that is
that we don't want to assert() or hard-fail on parsing errors. Instead,
we treat any invalid UTF-8 sequences as ISO-8859-1. This allows pasting
invalid data into a terminal (which cannot be controlled through the TTY,
anyway) and we still deal with it in a proper manner.
This is _required_ for 8-bit and 7-bit DEC modes (including the g0-g3
mappings), so it's not just an ugly fallback because we can (it's still
horribly ugly but at least we have an excuse).
|
|
|
|
Rather than refetching the link information on ever event, we liston to
rtnl to track them. Much code stolen from resolved.
This will allow us to simplify the sd-network api and don't expose
information available over rtnl.
|
|
|
|
This commit introduces libsystemd-ui, a systemd-internal helper library
that will contain all the UI related functionality. It is going to be used
by systemd-welcomed, systemd-consoled, systemd-greeter and systemd-er.
Further use-cases may follow.
For now, this commit only adds terminal-page handling based on lines only.
Follow-up commits will add more functionality.
|
|
This Pty API wraps the ugliness that is POSIX PTY. It takes care of:
- edge-triggered HUP handling (avoid heavy CPU-usage on vhangup)
- HUP vs. input-queue draining (handle HUP _after_ draining the whole
input queue)
- SIGCHLD vs. HUP (HUP is no reliable way to catch PTY deaths, always
use SIGCHLD. Otherwise, vhangup() and friends will break.)
- Output queue buffering (async EPOLLOUT handling)
- synchronous setup (via Barrier API)
At the same time, the PTY API does not execve(). It simply fork()s and
leaves everything else to the caller. Usually, they execve() but we
support other setups, too.
This will be needed by multiple UI binaries (systemd-console, systemd-er,
...) so it's placed in src/shared/. It's not strictly related to
libsystemd-terminal, so it's not included there.
|
|
The Barrier-API simplifies cross-fork() synchronization a lot. Replace the
hard-coded eventfd-util implementation and drop it.
Compared to the old API, Barriers also handle exit() of the remote side as
abortion. This way, segfaults will not cause the parent to deadlock.
EINTR handling is currently ignored for any barrier-waits. This can easily
be added, but it isn't needed so far so I dropped it. EINTR handling in
general is ugly, anyway. You need to deal with pselect/ppoll/... variants
and make sure not to unblock signals at the wrong times. So genrally,
there's little use in adding it.
|
|
The "Barrier" object is a simple inter-process barrier implementation. It
allows placing synchronization points and waiting for the other side to
reach it. Additionally, it has an abortion-mechanism as second-layer
synchronization to send abortion-events asynchronously to the other side.
The API is usually used to synchronize processes during fork(). However,
it can be extended to pass state through execve() so you could synchronize
beyond execve().
Usually, it's used like this (error-handling replaced by assert() for
simplicity):
Barrier b;
r = barrier_init(&b);
assert_se(r >= 0);
pid = fork();
assert_se(pid >= 0);
if (pid == 0) {
barrier_set_role(&b, BARRIER_CHILD);
...do child post-setup...
if (CHILD_SETUP_FAILED)
exit(1);
...child setup done...
barrier_place(&b);
if (!barrier_sync(&b)) {
/* parent setup failed */
exit(1);
}
barrier_destroy(&b); /* redundant as execve() and exit() imply this */
/* parent & child setup successful */
execve(...);
}
barrier_set_role(&b, BARRIER_PARENT);
...do parent post-setup...
if (PARENT_SETUP_FAILED) {
barrier_abort(&b); /* send abortion event */
barrier_wait_abortion(&b); /* wait for child to abort (exit() implies abortion) */
barrier_destroy(&b);
...bail out...
}
...parent setup done...
barrier_place(&b);
if (!barrier_sync(&b)) {
...child setup failed... ;
barrier_destroy(&b);
...bail out...
}
barrier_destroy(&b);
...child setup successfull...
This is the most basic API. Using barrier_place() to place barriers and
barrier_sync() to perform a full synchronization between both processes.
barrier_abort() places an abortion barrier which superceeds any other
barriers, exit() (or barrier_destroy()) places an abortion-barrier that
queues behind existing barriers (thus *not* replacing existing barriers
unlike barrier_abort()).
This example uses hard-synchronization with wait_abortion(), sync() and
friends. These are all optional. Barriers are highly dynamic and can be
used for one-way synchronization or even no synchronization at all
(postponing it for later). The sync() call performs a full two-way
synchronization.
The API is documented and should be fairly self-explanatory. A test-suite
shows some special semantics regarding abortion, wait_next() and exit().
Internally, barriers use two eventfds and a pipe. The pipe is used to
detect exit()s of the remote side as eventfds do not allow that. The
eventfds are used to place barriers, one for each side. Barriers itself
are numbered, but the numbers are reused once both sides reached the same
barrier, thus you cannot address barriers by the index. Moreover, the
numbering is implicit and we only store a counter. This makes the
implementation itself very lightweight, which is probably negligible
considering that we need 3 FDs for a barrier..
Last but not least: This barrier implementation is quite heavy. It's
definitely not meant for fast IPC synchronization. However, it's very easy
to use. And given the *HUGE* overhead of fork(), the barrier-overhead
should be negligible.
|
|
One missing string found.
A few things had to be moved around to make it possible to test them.
|
|
It depends on libgobject and libgmodule which are installed in /usr/lib.
|
|
|
|
|
|
|
|
|
|
|
|
Directory src/journal has become one of the largest directories,
and since systemd-journal-gatewayd, systemd-journal-remote, and
forthcoming systemd-journal-upload are all closely related, create
a separate directory for them.
|
|
|
|
|
|
|
|
Let's turn resolved into a something truly useful: a fully asynchronous
DNS stub resolver that subscribes to network changes.
(More to come: caching, LLMNR, mDNS/DNS-SD, DNSSEC, IDN, NSS module)
|
|
It was broken since systemd was moved out of /bin.
For zsh it was never there.
|
|
Split each netdev kind into its own .h/.c.
|
|
|
|
It is already in nodist_systemunit_DATA and if it is
shipped, it contains the hardcoded path to systemctl
which will cause it to fail to start when
rootprefix != prefix and rootbindir != bindir.
|
|
This reverts commit 0c26bfc3d21fdb3963f1248c237e2f1a33b5566d.
src/core/org.freedesktop.systemd1.policy.in.in depends on values which
are specified at configure time, so we cannot ship the corresponding
policy file in the tarball.
Since we need to regenerate one policy file, we might as well generate
them all.
|
|
|
|
all local containers
|
|
|
|
|
|
private in-addr-util.[ch]
These are enough calls for a new file, and they are sufficiently
different from the sockaddr-related calls, hence let's split this out.
|
|
make use of it from machined
|
|
|
|
|
|
Alternative NTP implementations should add a:
Conflicts=systemd-timesyncd.service
to take over the built-in NTP functionality of systemd.
|
|
The systemd-escape utility might be used during early boot (e.g. when
being triggered from udev rules), so move it to rootbindir to support
systems with a split /usr setup.
|
|
|
